Any love for Wenger?
-
@enki_ck said:
Haven't we went over all of this like a dozen times in various other threads?Do we really need to go over it again, when obviously no one is changing their minds on it?

Sorry enki
I don't mean to annoy people, but nor can I do nothing or sit here and lie and say all is fine.
If I wasn't interested I wouldn't be here on a forum thats dedicated solely to multitools and swiss army knives.
What started me off was the mention of the damascus spartan...
Its just Vic all over, takes the bloody easy route every time..!!
Boring boring boring!!

I promise to try and keep shut

-
I understand Tosh's POV and I can say that in general terms I embrace it, under a few conditions, the first and most important of which being final product quality, or client satisfaction. In this regard I hold Vic's as an exemplary company model even tho' I don't quite like their marketing turn to a luxurious brand, which is different than prestigious.
I like quality that won't jeopardise my physical integrity easily; its why I support R & D, I would be stupid to think otherwise, just not at the expense of safety. It's why I dislike too much electronics on cars, for example. I guess there's no other viable way of improving a product, here a car, other than testing it in real life, if profit is ever to be made. SAK's being a market of their own, I like Vic's approach, there's a lesson to be learned there.
I also like the SwissTool's pliers tip, not too broad, not too narrow, truly versatile. (Now, Vic, please make them less slipperish
)Discussion is good, never forget that, children.

Edit: I'll have to expand on my post later, no time right now. The SAK-sized MT raises a interesting question as well.
-
OK, going back to topic, here is an interesting find.
I admit that I didn't know the correct english name for it, but after some search I think it is called Lenticular Print.
Basically, the image changes as long as you change your point of view.
In this case, the knife changes from closed to fully opened.
I think this panel is probably from the late '80's, first 90's.
Goes well toghether with the other vintage display I have, with the knife "embossed" (I think I already posted pictures of it here in this topic).
Sorry for the first two pictures, but it is nearly impossible to take good ones, because of how the panel is made.

-
sorry double post
-
@basilio said:
OK, going back to topic, here is an interesting find.
I admit that I didn't know the correct english name for it, but after some search I think it is called Lenticular Print.
Basically, the image changes as long as you change your point of view.
In this case, the knife changes from closed to fully opened.
I think this panel is probably from the late '80's, first 90's.
Goes well toghether with the other vintage display I have, with the knife "embossed" (I think I already posted pictures of it here in this topic).
Sorry for the first two pictures, but it is nearly impossible to take good ones, because of how the panel is made.Nice Find...
Der kleinste Werkzeugkasten der Welt

(Smallest Toolbox of the world) -
Reposting from "...the latest SAK" thread.
Some recent Wengers....
A unused/mint in box blue Traveler, a Basic 09 (Forester) and a Backpacker II.

....and the Journeyman.

-
@basilio said:
OK, going back to topic, here is an interesting find.
I admit that I didn't know the correct english name for it, but after some search I think it is called Lenticular Print.
Basically, the image changes as long as you change your point of view.
In this case, the knife changes from closed to fully opened.
I think this panel is probably from the late '80's, first 90's.
Goes well toghether with the other vintage display I have, with the knife "embossed" (I think I already posted pictures of it here in this topic).
Sorry for the first two pictures, but it is nearly impossible to take good ones, because of how the panel is made.I confirm : between 1986 and 1990 !
-
The biggest Ranger in the world : 6 layers !





-
That is very cool. I'd buy that! :)
-
Sure ?
I can make one for you but It's expensive, I need to buy 3 knives 179,04 € + Shipping cost around 28€ (it's heavy)...
So I think it's only a "curiosity monster" to show because this knife will never exist !
But if you really want one, it's possible to do it and I can make it for you ! -
Hats off to you jc

In theory how wide could you go??
I'd love a fully loaded ranger with both the shears and pliers layer, plus all the variations of blades including the mike horn serrated pattern.
What do you think such a beast would cost and would the pins be able to cope with the weight or would it sag.It really would be the ultimate Wenger for me

-
@tosh said:
Hats off to you jc
In theory how wide could you go??
I'd love a fully loaded ranger with both the shears and pliers layer, plus all the variations of blades including the mike horn serrated pattern.
What do you think such a beast would cost and would the pins be able to cope with the weight or would it sag.It really would be the ultimate Wenger for me

Well, with guenine Wenger rivet max wide is 3.50 cm (1.38 inch) but with other special rivets there is no weight and no wide limits (see the Wenger Giant !).
For all blades and all tools of Ranger knives, first you must to buy all Wenger knives to take blades and tools you need, then you have to make special rivets. I'm not sure it's still possible to buy all knives you need (In Europe I'm pretty sure it's impossible).
But if you can find all knives needed in US or in Canada, you can send them to me and I will make this "monster" for you !
-
Hats off to you jc

In theory how wide could you go??
I'd love a fully loaded ranger with both the shears and pliers layer, plus all the variations of blades including the mike horn serrated pattern.
What do you think such a beast would cost and would the pins be able to cope with the weight or would it sag.It really would be the ultimate Wenger for me

Well, with guenine Wenger rivet max wide is 3.50 cm (1.38 inch) but with other special rivets there is no weight and no wide limits (see the Wenger Giant !).
For all blades and all tools of Ranger knives, first you must to buy all Wenger knives to take blades and tools you need, then you have to make special rivets. I'm not sure it's still possible to buy all knives you need (In Europe I'm pretty sure it's impossible).
But if you can find all knives needed in US or in Canada, you can send them to me and I will make this "monster" for you !
I still have a Mike Horn

You would need:
Alinghi: Marlin Spike and nice serated Blade
Gardener: For the shears
Mike Horn: Plane Blade, Sheepfoot Blade (serated), short File
Electrician: Hawkbill Blade
Ranger 50 or Hunter: gutting / safety Blade and wood saw
Rescue / East Ranger or Handyman: Long metal file
OboeThat gives:
3 OHO Blades
Gutting Blade
Oboe Blade
2 Metal Files
Pliers
Shears
Marlin Spike
10 layers ranger, roughly 8 cm thick 
-
Hats off to you jc

In theory how wide could you go??
I'd love a fully loaded ranger with both the shears and pliers layer, plus all the variations of blades including the mike horn serrated pattern.
What do you think such a beast would cost and would the pins be able to cope with the weight or would it sag.It really would be the ultimate Wenger for me

Well, with guenine Wenger rivet max wide is 3.50 cm (1.38 inch) but with other special rivets there is no weight and no wide limits (see the Wenger Giant !).
For all blades and all tools of Ranger knives, first you must to buy all Wenger knives to take blades and tools you need, then you have to make special rivets. I'm not sure it's still possible to buy all knives you need (In Europe I'm pretty sure it's impossible).
But if you can find all knives needed in US or in Canada, you can send them to me and I will make this "monster" for you !
I still have a Mike Horn

You would need:
Alinghi: Marlin Spike and nice serated Blade
Gardener: For the shears
Mike Horn: Plane Blade, Sheepfoot Blade (serated), short File
Electrician: Hawkbill Blade
Ranger 50 or Hunter: gutting / safety Blade and wood saw
Rescue / East Ranger or Handyman: Long metal file
OboeThat gives:
3 OHO Blades
Gutting Blade
Oboe Blade
2 Metal Files
Pliers
Shears
Marlin Spike
10 layers ranger, roughly 8 cm thick 
EEK.... :ahhh
So basically we're looking at £500+
Still, it would be an incredible addition
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login