And so it begins.... (My adventures into Alox!)
-
dumb question I know, but what does 'BO' stand for??
really lovely work there by the way, have been lurking and watching this thread (and wondering what I'll eventually order) for ages :D
HTH, HAND ;)
:D That kind wouldnt have much value though! :D
But yes, black oxide is often shortformed to BO.
It's Fe3O4, (magnetite). As a interesting aside, if you watch gold rush, when they talk about the 'black sand' that is mixed with find gold, thats the same stuff, magnetite. :tu:
Ah cool, I did not know that. :tu:
-
dumb question I know, but what does 'BO' stand for??
really lovely work there by the way, have been lurking and watching this thread (and wondering what I'll eventually order) for ages :D
HTH, HAND ;)
:D That kind wouldnt have much value though! :D
But yes, black oxide is often shortformed to BO.
It's Fe3O4, (magnetite). As a interesting aside, if you watch gold rush, when they talk about the 'black sand' that is mixed with find gold, thats the same stuff, magnetite. :tu:
Ah cool, I did not know that. :tu:
me neither! very cool.
Now i'm having a read about how anodising allows dyeing of the surface :D
-
More brass and cerakote today






I swear someday I'll get caught up on the standard mods then come up with some new stuff. Locking Ti liners is for sure next when I get time.
-
That orange is just gorgeous and its a nice tool load

-
Very nice. That orange is
. -
Can you do patterns in your Cerakote?
That orange has me thinking of tigers' stripes!
-
@ironraven said:
Can you do patterns in your Cerakote?That orange has me thinking of tigers' stripes!
Jeff Forbush is my cerakote guy, and Ive seen him do things like that. Camo patterns and stripes, but I haven't asked him to try yet.
Funny thing you mentioned tiger stripes. Ive been looking for a good vector file to have some vinyl masks cut to use in Ti anodizing, to get a tiger stripe effect. I know a sign maker that has a large vinyl cutter and he said I just need to supply him the vector file. :D
-
Can you do patterns in your Cerakote?
That orange has me thinking of tigers' stripes!
Jeff Forbush is my cerakote guy, and Ive seen him do things like that. Camo patterns and stripes, but I haven't asked him to try yet.
Funny thing you mentioned tiger stripes. Ive been looking for a good vector file to have some vinyl masks cut to use in Ti anodizing, to get a tiger stripe effect. I know a sign maker that has a large vinyl cutter and he said I just need to supply him the vector file. :D
I have been wanting a digital camo alox for about two years now.

-
@captain spaulding said:
Can you do patterns in your Cerakote?
That orange has me thinking of tigers' stripes!
Jeff Forbush is my cerakote guy, and Ive seen him do things like that. Camo patterns and stripes, but I haven't asked him to try yet.
Funny thing you mentioned tiger stripes. Ive been looking for a good vector file to have some vinyl masks cut to use in Ti anodizing, to get a tiger stripe effect. I know a sign maker that has a large vinyl cutter and he said I just need to supply him the vector file. :D
I have been wanting a digital camo alox for about two years now.

That would be super sweet.

-
I finished my marathon peening session today and listed the BO'd spartans and campers if anyone was wanting those. It seems like a simple enough task but peening up 20 SAKs in one go is a looooong process. :D
</topic/55313






-
What, no fish scalers?

mmm, those campers look nice. I can almost see one of then with a set of green canvas micarta scales.
-
Hmm I COULD have added those yes.. BUT I dont think it was worth the extra few bucks to have more parts BO'd and liners anodized. In the last 3 years I can only remember using one on an alox mod 1 time, and one other time on a cellidor mod.
I'll throw in a couple for next time and make some BO'd fishermen type SAKs. :D Or maybe I can call them panel punch tools and say they are for electricians?

-
How about sharpening them from one side to get a self made rescue blade?
-
I have a feeling its not the same steel they use in the blades and wouldnt hold much of an edge... but maybe? I made one into a long spike / awl once with a hole in the end and took off the bottom prong, but it was still too thin to be sturdy.
-
I still think you could shift a few on a fishing forum.
-
I still think you could shift a few on a fishing forum.
Call it a "<u>tactical Swiss hook dislodger</u>" :P :P
Will that remove the hook from the back of my Climber?
Negative. The Tactical Swiss hook dislodger, can not take out a Tactical Assault Parcel Hook.
Nate
-
I still think you could shift a few on a fishing forum.
Call it a "<u>tactical Swiss hook dislodger</u>" :P :P
Will that remove the hook from the back of my Climber?
Negative. The Tactical Swiss hook dislodger, can not take out a Tactical Assault Parcel Hook.
Nate
Yeah, those things are TAPH!

-
Today's work was on a big alox monster with brass liners.

I like to use long brass rods for fitups before I use the finished scales or tools. All the Vic parts in this picture are all from my fit up parts and are ones that used solely for fitups. I dont use the same tools I will deliver on a custom so they remain in perfect condition until final assembly.

The springs and liners are the only finished part I am making at this stage. Here is what the back looks like before I work on the springs. Notice the custom spring I make is not finished at this stage. It actually sits proud of the other springs and I grind it flush and then finish all springs at that time.

The result is a nice uniform looking back, with my custom spring blending right into the stock springs. I polish them all the same along with the liners for a high end fit and finish.

Understandably I get alot of people asking to buy springs from me for the scissors layer, but I dont sell them since they arent ready to use as is. I finish them as part of the build, so that is why they are not a ready to go part.
Here is the big blue monster all finished up.






Cheers!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login