The Hacked Leatherman Owners Club.
-
Oops doubled in post. There was a glitch earlier. That's actually the SUPER TOOL 300 with the steak knives. Here is my REBAR. Both have no problem opening and deploying.




-
Again, that is some sweet modding!
Nate
-
You've certainly got some bladed beasts there bobbaero

-
Nice one baja.

-
Hey man , I like your ideas, good imagination :) it's also good to see someone else that is brave enough to carry a surge and super tool in your pocket. I hate using sheaths. On your surge, is the ruler part of the scales blue? Or just the reflection of the hack saw blade?
Also how do you deploy the razor blades or backward knives without slicing up finger tips? -
The razor is modified according to rebar specs self retracting tool. I deploy the razor blade like this.



-
Is it possible to move the Surge's scissors, saw & file holder and awl to a Charge TTi?
-
@kkokkolis said:
Is it possible to move the Surge's scissors, saw & file holder and awl to a Charge TTi?I've been meaning to try this for awhile now... I have a donor Surge all ready to go, I just haven't gotten around to actually doing the mod though.
Awl: It will be easier to use the awl from a Rebar -- the pivot area is the same, whereas you'd have to grind off a significant amount of metal from the Surge awl. zoidberg has some nice pics showing the difference. :)
Blade exchanger: Metro has done the blade exchanger mod on both a Charge and a Wave. I plan on using a Wave to start with, because I don't know if my Dremel is up to the task of grinding the titanium scales. :-\
Scissors: I don't know if anyone has attempted to fit the Surge scissors into a Wave/Charge, but I plan on attempting that as well if I ever get around to working on this mod.

I really don't have any excuse, I've just been busy.
the donor Surge was disassembled and cleaned months ago.... 
-
I was just checking and found that the scissors and blade exchanger plus blade are too long to fit. The scissors are also too wide. I was interested in a simple exchange. I'll have to continue using my Swisschamp's scissors and awl. But good luck to you and don't forget to update.
-
@kkokkolis said:
I was just checking and found that the scissors and blade exchanger plus blade are too long to fit. The scissors are also too wide. I was interested in a simple exchange. I'll have to continue using my Swisschamp's scissors and awl. But good luck to you and don't forget to update.will do.


-
@kkokkolis said:
I was just checking and found that the scissors and blade exchanger plus blade are too long to fit. The scissors are also too wide. I was interested in a simple exchange. I'll have to continue using my Swisschamp's scissors and awl. But good luck to you and don't forget to update.The scissor out of a 91mm SAK will fit in a Wave or charge. You will have to do some grinding.
Nate
-
I was just checking and found that the scissors and blade exchanger plus blade are too long to fit. The scissors are also too wide. I was interested in a simple exchange. I'll have to continue using my Swisschamp's scissors and awl. But good luck to you and don't forget to update.
The scissor out of a 91mm SAK will fit in a Wave or charge. You will have to do some grinding.
Nate
yup!
I mostly want to try the Surge scissors just to see if I can pull it off. :D -
I was just checking and found that the scissors and blade exchanger plus blade are too long to fit. The scissors are also too wide. I was interested in a simple exchange. I'll have to continue using my Swisschamp's scissors and awl. But good luck to you and don't forget to update.
The scissor out of a 91mm SAK will fit in a Wave or charge. You will have to do some grinding.
Nate
yup!
I mostly want to try the Surge scissors just to see if I can pull it off. :DI'm not liking the Wingman scissors very well just yet. May have to find some 91mm or Surge scissors and try this. I already put my spare Surge scissors in the ST300.
-
@Breezy12 said:
yup!
I mostly want to try the Surge scissors just to see if I can pull it off. :D@zoidberg said:
I'm not liking the Wingman scissors very well just yet. May have to find some 91mm or Surge scissors and try this. I already put my spare Surge scissors in the ST300.It's been done by one of the members of another forum, if memory serves me right it was over at British Blades.
The mod while functional, left a lot to be desired. The Surge scissors were just too long for Wave/Charge, so the modder had to saw off quite of bit of the tips leaving the unsightly and stumpy looking implement. The problem with Surge scissors isn't so much the length of its blades but the long handles. As a result a scissor pivot is too far down and blade tips need to be almost cut in half to fit the Wave/Charge cavity.
If I was doing this mod I would rather focus on the handle bottom stop and remove the little nub to add few more mm in total cavity length.
-
yup!
I mostly want to try the Surge scissors just to see if I can pull it off. :D@zoidberg said:
I'm not liking the Wingman scissors very well just yet. May have to find some 91mm or Surge scissors and try this. I already put my spare Surge scissors in the ST300.It's been done by one of the members of another forum, if memory serves me right it was over at British Blades.
The mod while functional, left a lot to be desired. The Surge scissors were just too long for Wave/Charge, so the modder had to saw off quite of bit of the tips leaving the unsightly and stumpy looking implement. The problem with Surge scissors isn't so much the length of its blades but the long handles. As a result a scissor pivot is too far down and blade tips need to be almost cut in half to fit the Wave/Charge cavity.
If I was doing this mod I would rather focus on the handle bottom stop and remove the little nub to add few more mm in total cavity length.
Move the pivot back to make up for the tip cut, use the old pivot as a paracord cutting notch?
-
If I was doing this mod I would rather focus on the handle bottom stop and remove the little nub to add few more mm in total cavity length.
Move the pivot back to make up for the tip cut, use the old pivot as a paracord cutting notch?
Hmm, not sure, it may turn a bit ugly, but be my guest. :P
You have my moral support, mate

-
:D Thanks but due to a lack of funds and parts I won't be trying anything for a while.
-
yup!
I mostly want to try the Surge scissors just to see if I can pull it off. :D@zoidberg said:
I'm not liking the Wingman scissors very well just yet. May have to find some 91mm or Surge scissors and try this. I already put my spare Surge scissors in the ST300.It's been done by one of the members of another forum, if memory serves me right it was over at British Blades.
The mod while functional, left a lot to be desired. The Surge scissors were just too long for Wave/Charge, so the modder had to saw off quite of bit of the tips leaving the unsightly and stumpy looking implement. The problem with Surge scissors isn't so much the length of its blades but the long handles. As a result a scissor pivot is too far down and blade tips need to be almost cut in half to fit the Wave/Charge cavity.
If I was doing this mod I would rather focus on the handle bottom stop and remove the little nub to add few more mm in total cavity length.
that's pretty much what I had in mind... I think I'd also have to shorten the pivot if I remove/grind down the bottom handle piece on the Wave.

zoidberg, I agree with you about the Wingman scissors. they work well enough in my skinny ReCharge because I use them for a very specific purpose (cutting open small plastic packages in the lab at work), but for general purpose use, they're certainly not the best scissors. :(
I picked up a couple used 91mm Vics on ebay awhile back, I think I'll try those scissors next.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


