Kampfer's Mini Surge (By Breezy12)
-
Thanks for the welcome!
I somehow managed to fix the issue of the tools being too tight, but the way I fixed it s going to sound pretty strange. All I did was I backed out the screw almost all the way and re-tightened it until the tools were no longer tight. I started to experiment with this and found that sometimes tightening it made the tools tight, sometimes it did not. Well, whatever.

After getting it so the tools weren't tight, I used a small c-clamp to hold the tools to the wave handle so I could back out the screw to loctite it without them getting all tight again. Blue loctite is actually the one I don't have; I have the red and purple.
The plier faces were scraping against the inside sides of the handle, not on the tools (well, on the tools too, but that's supposed to happen). All I did was I took the pliers to my belt sander to thin it by a few thou. I left a little bit of friction between the pliers and the handle sides in order to keep the handles closed.
I didn't have to grind the can opener at all. The pliers don't touch it whether the bit driver is deployed or not. In fact, it doesn't matter which inside tools I have deployed, the pliers don't get caught up on anything. Not sure what happened with yours, that is strange.
I quickly enlarged the pivot hole on the scissors and it works just fine without modifying the spring, thanks. That was a lot easier than I thought. Took a whole 10min to move the saw to the file spot, grind the scissors, and put it back together.
I do have one more question though. When putting the wave scissors in the rebar, exactly what order did the tools end up in? Right now I have it as knife>both washers>small flathead>lanyard ring>large flathead>scissors>file. The problem with this is it is very hard to catch the thin nail nick on the scissors with the file right next to it.
Anyway, yeah, these scissors aren't the greatest, but they're still loads better than those stupid wave scissors where you need to press your thumb on the blade just to open them. I plan on making a new knife and scissors for my wave out of 1084 eventually. The stock 420hc knife just isn't doing it for me. Also, Evil510's scissors look fantastic, I think I'll make something similar to those. If I ever get around to doing this, I'll start a new thread.
-
glad I could help!

that's really interesting with the screws.
oh well, at least you got it fixed.I'm sure there's some slight variation in the thickness of the plier heads... sounds like you got a thicker one. I seem to encounter slightly different issues anytime I do one of these mods.

glad you got the scissors sorted out.
I honestly don't remember what order I put the tools back in the Rebar handle; Kampfer might be able to tell you. Next to the file sounds right though.if you want to put an S30V blade in your Wave, Texas Tool Crafters has some for sale on ebay right now for $24 each -- not too shabby. And definitely keep us posted if you decide to create some custom scissors!

-
@Breezy12 said:
if you want to put an S30V blade in your Wave, Texas Tool Crafters has some for sale on ebay right now for $24 each -- not too shabby. And definitely keep us posted if you decide to create some custom scissors!
Well, crap. I guess there goes some more of my money, haha. I'll have to decide between the S30V, 154CM, or making my own 1084 blade. I really want to make it myself, heat treat and all, but those blades are just THERE on ebay. How did I not know about these replacement blades?
Kampfer, if you could check on the order of the tools in your rebar, I'd really appreciate it.
And thanks for the help, Breezy.
-
MJ, this order worked well for many:

As for the other notes, I definitely share some of your thoughts, observations and issues you encountered along the way.
For the pivot screws being too tight - I have come across the same, and funnily enough just like you I ended up removing the pivot screws and studs and re tighten them, slowly and carefully, observing very carefully along the way. What I found was that sometimes both OHO blades get "stuck" on the pivot stud (nut shaft part) and they get over tightened even by a smallest force applied. After adding some 3-in-one along the shaft it all worked well, the OHO blades are smooth and soft on opening/closing yet they don't catch on the inside of the scales.
The Wingman scissors are while not the greatest, very nice and will do the job well. You can also add your own touch to them like polishing or adding brushed finish. The default tumbled finish they come out from the factory cheapens the whole look and feel, to me anyway. I like tumbled/stonewashed look but not on everything.
As for the insides of the handles catching and rubbing against pliers on closing, yeah...that has been a pet peeve of mine for some time now. I try to steer away from re-brushing or grinding the pliers head surface to make it that much 'thinner' to fit without rubbing, though. I focus on the insides of the handles instead. If you look closely, the reason the pliers head catches on some Waves and Charges is that the OHO blade stop/retainer piece isn't always cut and bent perfectly flat. You need to sand off and polish sometimes internal part to make it 'thinner' and more flat to it doesn't stick out on the inside of the handles. Hope this makes sense and helps.
Also I found modding a Charge a doddle, it is I believe much easier as the Ti scales are perfectly flat with tighter tolerances and there's less chance your blades would grind against them or hit them on closing. I am about to do my first super-Wave mod but that will have to take a back seat for now.
-
@Breezy12 said:
if you want to put an S30V blade in your Wave, Texas Tool Crafters has some for sale on ebay right now for $24 each -- not too shabby. And definitely keep us posted if you decide to create some custom scissors!
Thanks for the heads-up brother, I am not going to miss out on that one again.
Ordered!

-
if you want to put an S30V blade in your Wave, Texas Tool Crafters has some for sale on ebay right now for $24 each -- not too shabby. And definitely keep us posted if you decide to create some custom scissors!

Well, crap. I guess there goes some more of my money, haha. I'll have to decide between the S30V, 154CM, or making my own 1084 blade. I really want to make it myself, heat treat and all, but those blades are just THERE on ebay. How did I not know about these replacement blades?
Kampfer, if you could check on the order of the tools in your rebar, I'd really appreciate it.
And thanks for the help, Breezy.
you're very welcome! glad I could help.

the S30V has great edge retention, but I'm actually thinking of grabbing a couple of the 154CM blades... 154CM is a joy to sharpen.

@babola said:
Thanks for the heads-up brother, I am not going to miss out on that one again.Ordered!

no problem!

-
I just wish I knew how leatherman heat treats their blades. I've heard of problems with their blades chipping/snapping. God himself can hand you the perfect piece of steel, but if it's poorly heat treated, it will perform like a sharpened piece of poo. This is the deciding factor in whether I make my own blade or buy theirs. I am leaning more toward making it out of 1084 right now. If I decide to make it I'll make a thread showing my process. I first need to put handle scales on a full tang knife I'm almost done with though.
Have you had any other S30V blades to compare it to? I'm totally not trying to sound like a know-it-all or anything, I just know from experience not to trust a knife based solely on what kind of steel it is.
-
wow, one of the best mods in a while, i want to do the plier mod to my charge tti, i didnt quite understand what happens with the lock grinding and these things, could you please explain to me what happens there and what can i do to prevent it?

-
On one hand I like to keep a;; parts in Mini-Surge Leatherman, but the performance of Vix scissors are superior.
-
Could the vic scissors go into the mini surge?
-
@masterjuggler said:
Could the vic scissors go into the mini surge?Others here done something similar
, I am looking into it -
Could the vic scissors go into the mini surge?
Others here done something similar
, I am looking into itenki_ck posted some great pics of his Vic scissors in a Charge... I'll be trying this out in the near future. :)
-
@masterjuggler said:
I just wish I knew how leatherman heat treats their blades. I've heard of problems with their blades chipping/snapping. God himself can hand you the perfect piece of steel, but if it's poorly heat treated, it will perform like a sharpened piece of poo. This is the deciding factor in whether I make my own blade or buy theirs. I am leaning more toward making it out of 1084 right now. If I decide to make it I'll make a thread showing my process. I first need to put handle scales on a full tang knife I'm almost done with though.Have you had any other S30V blades to compare it to? I'm totally not trying to sound like a know-it-all or anything, I just know from experience not to trust a knife based solely on what kind of steel it is.
I'm probably not the best person to ask on this... I haven't had any issues with the Leatherman S30V blades, but I don't have any other S30V blades to compare them to. I think the closest comparison I have would be a Spyderco Delica with a ZDP-189 blade.
and you don't sound like a know-it-all. ;) I think your advice is spot on -- trusting a knife solely based on the blade steel is foolish.
-
@dan.mandiel said:
wow, one of the best mods in a while, i want to do the plier mod to my charge tti, i didnt quite understand what happens with the lock grinding and these things, could you please explain to me what happens there and what can i do to prevent it?
thanks Dan!

I'll try to get some pics of the overextended pin to show you what we're talking about. :)
-
Yeah, I think I'm going to first try to make it out of 1084 before buying one of their blades. Not only because I'm suspicious of their blade quality, but also because I have that desire we all have to make this stuff myself before resorting to buying a pre-made version.
When I make it, I don't think I'm going to be making a tutorial on it, but I will post progress pics (in a dedicated thread of course, I'm not going to hijack this one haha). I'll leave the knife making tutorials for the dedicated knife forums. I'll start on it as soon as I finish with my current knife project (a 10" full tang knife) and I work more on organizing my workshop (my basement), though that project will probably never end LOL.
-
@masterjuggler said:
When I make it, I don't think I'm going to be making a tutorial on it, but I will post progress pics (in a dedicated thread of course, I'm not going to hijack this one haha). I'll leave the knife making tutorials for the dedicated knife forums...You should definitely write about it here in this forum, it's where that sort of stuff belongs too...and in the Leatherman forum, of course.
-
I guess I'll make a bit of a write up about it then, going though it as I do it. It'll be fun, because I've never had to make something where I'm replicating the shape and dimensions of something else. When I make things, I usually don't even use a ruler lol.
Here's a question: If you could have a different kind of blade/tool to replace the serrated blade, what would it be?
Reason I ask is I actually ground down the serrated blade to make a straight edge, because after 2 years of owning the wave I used the serrated blade exactly once. I'm thinking about replacing the serrated blade with my 1084 blade, keeping the 420hc, and use both at the same time to really test the difference. Either that or make something entirely new. I'm not sure yet.
-
@masterjuggler said:
I guess I'll make a bit of a write up about it then, going though it as I do it. It'll be fun, because I've never had to make something where I'm replicating the shape and dimensions of something else. When I make things, I usually don't even use a ruler lol.Here's a question: If you could have a different kind of blade/tool to replace the serrated blade, what would it be?
Reason I ask is I actually ground down the serrated blade to make a straight edge, because after 2 years of owning the wave I used the serrated blade exactly once. I'm thinking about replacing the serrated blade with my 1084 blade, keeping the 420hc, and use both at the same time to really test the difference. Either that or make something entirely new. I'm not sure yet.
Well if you're keen on making another PE blade out of 1084 then at least make it with a gut hook. It also doubles up as strap cuter and can come handy. It adds to variety ;)
Also, if you're not 100% sure between the PE and SE edge, why not making it a combo edge?
Just few thoughts...that's all. ;)
-
No, the point is I have no use for the serrated blade, and want to make something different. I just don't know what to put there instead, and i'm looking for ideas.
I might just make the gut hook though. The problem is I don't have a good way to sharpen something like that.
-
Filed down all the edges to make it more comfortable to grip.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login