Models with inline philips still around.
-
If a 4 layer Explorer is uncomfortable <u>lying </u> in your pocket you might :
try eBay for a Passenger
or
try a Leatherman Crater c33TX which has an inline Phillips and<u>,it has a pocket clip.</u>
or
try hanging the Explorer from a loop of string / paracord from the belt with a clip.
Sometimes when the knife hangs <u>vertically </u>in the pocket it's comfortable.
A belt sheath could also be a solution. -
@Shalom said:
If a 4 layer Explorer is uncomfortable <u>lying </u> in your pocket you might :
try eBay for a Passenger
or
try a Leatherman Crater c33TX which has an inline Phillips and<u>,it has a pocket clip.</u>
or
try hanging the Explorer from a loop of string / paracord from the belt with a clip.
Sometimes when the knife hangs <u>vertically </u>in the pocket it's comfortable.
A belt sheath could also be a solution.I use a P-7 clip and do have it in my pocket. I would like a thinner sak so i dont have to use the clip because the clipmis noticeable and in some places I frequent if it seen then it is taken away til I leave.
-
I would love an alox model setup like the Farmer with a combo tool in place of the can opener and an inline Philips driver in place of the cap lifter.
Good luck in your search I find a dedicated Philips driver very handy and the most used tool on my Tinker. Only problem is the driver on the back at 90deg is less useful in tight places than an inline dedicated driver.
Sent from my iPhone using Tapatalk
-
Thanks for the replies but I need something that is in production or easily found so it doesnt cost alot of money.
The Passenger would be perfect size. :)
Pretty much the explorer is your option then.

Yeah, thought so! Just hoping I could find a three layer one.
Yeoman is in "special production" and available from SwissBianco. Not cheap, though.
-
Explorer --> Passenger is an easy mod to make. You won't even need new pins if you're careful.

-
You know, Victorinox could bring back the Yeoman. It would sell....
-
Agree syph
Sent from my iPhone using Tapatalk
-
@hiraethus said:
Explorer --> Passenger is an easy mod to make. You won't even need new pins if you're careful.
+1. Would be a nice way to get into modding.
-
Explorer --> Passenger is an easy mod to make. You won't even need new pins if you're careful.

+1. Would be a nice way to get into modding.
I dont wanna get into moddjng as I will leave that to you guys! :)
I am considering a Spartan lite and would like someone to swapped out the lite for a mag glass.
Another idea, I have an Explorer and a black Pioneer so it would be nice to take the scissors out from the Explorer and put them into the Pioneer. I would end up with a Passenger and a cool Pioneer.
-
@sir_mike said:
I am considering a Spartan lite and would like someone to swapped out the lite for a mag glass.it would be easier and cheaper to remove the scissors from an Explorer than it would be to take the "Lite" out and put a magnifier in (the magnifier has to come from somewhere). The Spartan Lite is, according to SAKWiki, 2mm thicker than the Passenger and only 1mm thinner than the Explorer.
The CT29 is technically only 3 layers, but it's as thick as the 4 layer Explorer.
-
I am considering a Spartan lite and would like someone to swapped out the lite for a mag glass.
it would be easier and cheaper to remove the scissors from an Explorer than it would be to take the "Lite" out and put a magnifier in (the magnifier has to come from somewhere). The Spartan Lite is, according to SAKWiki, 2mm thicker than the Passenger and only 1mm thinner than the Explorer.
The CT29 is technically only 3 layers, but it's as thick as the 4 layer Explorer.
Yes! The lite has thicker liners than it needs to, to accommodate the stupid light.
-
rally, rambler, manager, minichamp has also inline philips.
-
I have the Manager on my keychain. I guess I will just stick to the Explorer I have.
Thx. all for the comments. Mods feel free to close this thread.
Thx.
-
Just save up your money and have Syph mod you up an Alox after the holidays. Not till I get mine made though.
There is one posted on the Alox forever thread that would be perfect or you could go even more bare.
Something like a blade, combo opener/flat head and a inline phillips. Would be like what 2 layers?

-
I have an Explorer, SwissBianco Yeoman, and Spartan Lite.
My favorite is the Spartan Lite. Why?
The combo tool on the Yeoman is bad. It does everything...POORLY. I tried it as a bottle opener one time, and the sharpish tip punctured into a Coke bottle cap. Fail. I tried it as a screwdriver a few times, but it is usually too small for a regular size screw, and it closes up on me easily. Fail. Too big for a small screw, fail again. It just fails at EVERYTHING. I also don't like the hook that +B put there instead of the awl. The awl is a more useful tool, all-around.
The Explorer is wonderful, but as you said, it is a bit thick. A pocket hanger does wonders for this though, if you can bear to have that pocket hanger showing all the time.
With the Spartan Lite, I thought I would miss the scissors, but I hardly ever do. Not NEARLY as often as I missed the proper screwdriver or awl on the Yeoman. Also, since someone here pointed out that with two blades, one can use the small blade as an all-around utility blade, and keep the big one clean and sharp for the odd food duty, I've been really enjoying doing that.
The LED flashlight and magnifier are about equally useful to me.
The Spartan Lite is only marginally thinner than the Explorer though, because the light is a thicker layer than the magnifier.
Drop me a line if you might be interested in the +B Yeoman.
-
The Hook as a scissors spring back-tool is not +B (SwissBianco) "invention", but Victorinox's
>:D I.e. +B hasn't put The Hook instead of the awl, but he has used the original tools in original manner :D

Although +B has changed Yeoman, precisely the Yeoman layers line-up, putting the magnifier-phillips layer in the middle and scissors layer on the top ;)
The Hook rules ... :D

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login