Why no Yeoman?
-
Yep spoke to soon i guess.
So one more layer and it has the back tools. Not hating the Explorer but I am thinking a custom built Yeoman might be my perfect minimal SAK.
Not to mention I could get the beauty, light weight and ease of maintenance of an Alox at the same time.
-
You don't stay in business for 125+ years by not knowing your market.
My response to this is Apple.

??? Not sure I get the point, sorry.
-
I would miss the tin opener as use it more than the caplifter,this is why i mainly carry my swisschamp :D
-
You don't stay in business for 125+ years by not knowing your market.
My response to this is Apple.

??? Not sure I get the point, sorry.
Its cool. In another thread here we was making fun of Apple. Guess it spilled over to this one.
Had a close call a few seconds ago. Checked FelineVets EDC store for a Yeoman. Luckily for my wallet he did not have any.
@Zed said:
I would miss the tin opener as use it more than the caplifter,this is why i mainly carry my swisschamp :DThe tool on the Yeoman is a combo tool that opens cans and bottles.

Don't mean I don't want to buy a SC though. Sigh.
-
Honestly I prefer the Explorer. Why? One of the most important uses my SAKs have is light prying and opening paint cans using the flat driver/bottle opener. The combo tool isn't thick enough for this. I've tried it several times with different knives including a Yeoman, and I've stopped because each time I was afraid I was going to break the Combo tool! :ahhh I have no problem pocket carrying a larger SAK, my Swisschamp sees plenty of pocket time, attached to a belt hanger to keep it vertical. Never had an issue.
-
I've been thinking about making a Yeoman recently.
I even found somewhere selling a Waiter for a reasonable price.
Then I read this post.@Smaug said:
The combo tool on the Yeoman is bad. It does everything...POORLY. I tried it as a bottle opener one time, and the sharpish tip punctured into a Coke bottle cap. Fail. I tried it as a screwdriver a few times, but it is usually too small for a regular size screw, and it closes up on me easily. Fail. Too big for a small screw, fail again. It just fails at EVERYTHING.Now I'm not too sure.
Do I keep the opener layer and swap the mag glass for an electricians blade.
Or keep the mag glass and go four layers with electricians blade and awl.
Ditch the blade and keep it three layers.
So many options. -
Well see that's the thing. On paper the combo tools is great, in pratice I personally dont like it. The combo tool does not replace a dedicated opener layer. The versatility of the bottle opener / can opener are part of what makes a SAK a SAK to me. The combo tool is much thinner and much more flimsy. Its ok as a can opener, but aweful as a pry tool, bottle opener, screwdriver.
Now that being said, I would still prefer an explorer without the mag glass. If I could do the phillips across from both openers trick on a 91mm SAK that is a big winner to me.
- small blade / main blade
- scissors
- phillips / can opener / bottle opener
The closest stock model to ideal to me is a super tinker. That is 3 layers of awesome tool right there. Or deluxe tinker if you are ok with 4 layers.
-
@Syph007 said:
If I could do the phillips across from both openers trick on a 91mm SAK that is a big winner to me.- small blade / main blade
- scissors
- phillips / can opener / bottle opener
I was just looking at pics of your alox one.
How much of a mission is it to do on a 91mm?
I'm thinking of...- awl / electricians blade
- scissors
- phillips / bottle opener / can opener
Thoughts?
-
@Syph007 said:
Well see that's the thing. On paper the combo tools is great, in pratice I personally dont like it. The combo tool does not replace a dedicated opener layer. The versatility of the bottle opener / can opener are part of what makes a SAK a SAK to me. The combo tool is much thinner and much more flimsy. Its ok as a can opener, but aweful as a pry tool, bottle opener, screwdriver.Now that being said, I would still prefer an explorer without the mag glass. If I could do the phillips across from both openers trick on a 91mm SAK that is a big winner to me.
- small blade / main blade
- scissors
- phillips / can opener / bottle opener
The closest stock model to ideal to me is a super tinker. That is 3 layers of awesome tool right there. Or deluxe tinker if you are ok with 4 layers.
I started to write a response, then Syph said everything I was about to, even mentioning his Alox mod of the phillips across from the openers (which I need to get one of these days :) ) My usual carry is a Super Tinker, occasionally an Explorer if I can deal with carrying an extra layer.
I do still miss the Yeoman though (traded it away), even if only for light duty use. Might have to make up another one someday.
-
If I could do the phillips across from both openers trick on a 91mm SAK that is a big winner to me.
- small blade / main blade
- scissors
- phillips / can opener / bottle opener
I was just looking at pics of your alox one.
How much of a mission is it to do on a 91mm?
I'm thinking of...- awl / electricians blade
- scissors
- phillips / bottle opener / can opener
Thoughts?
I tried to do it o a 91 and its really not possible. 91s are not symmetrical so the springs cant be flipped around. Symmetry is part of what makes the 93 a perfect platform.
-
The combo tool is a weak screwdriver and should not be considered as a pry tool. That said, I have found it a very capable cap lifter and can opener. So from that angle, you need to consider how much you do of what activity.
For example, if you need a phillips driver but don't encounter stubborn screws, a back spring phillips would be fine. Inline phillips wins when a little more oomph is required. Same with the combo tool vs cap lifter. If flat head drivers or prying is not high on your priority list, then a combo tool may be just the ticket.
You could of course carry a little one piece tool on your keys to take care of the rogue flat driving or prying tasks that arise. I nearly always pair my SAK with a pliers tool to compensate for the limitations of the SAK pliers, so between the two tools, I can handle most things I'll encounter. If the SAK doesn't have something such as scissors, phillips, robust flat driver, I'll be sure that the tool it's paired with can cover any shortcomings
-
Well see that's the thing. On paper the combo tools is great, in pratice I personally dont like it. The combo tool does not replace a dedicated opener layer. The versatility of the bottle opener / can opener are part of what makes a SAK a SAK to me. The combo tool is much thinner and much more flimsy. Its ok as a can opener, but aweful as a pry tool, bottle opener, screwdriver.
Now that being said, I would still prefer an explorer without the mag glass. If I could do the phillips across from both openers trick on a 91mm SAK that is a big winner to me.
- small blade / main blade
- scissors
- phillips / can opener / bottle opener
The closest stock model to ideal to me is a super tinker. That is 3 layers of awesome tool right there. Or deluxe tinker if you are ok with 4 layers.
I started to write a response, then Syph said everything I was about to, even mentioning his Alox mod of the phillips across from the openers (which I need to get one of these days :) ) My usual carry is a Super Tinker, occasionally an Explorer if I can deal with carrying an extra layer.
I do still miss the Yeoman though (traded it away), even if only for light duty use. Might have to make up another one someday.
what kind of bottles are you guys trying to open with the combo tool??
I agree that it doesn't stand up to prybar-like use. I haven't tried opening a can with it, but I'm guessing it won't do too well. But I've been carrying a Yeoman around the house lately (thanks eddie!), and the combo tool opens my evening beverages without any problems at all... -

Love my yeoman.
Prettiest sak I've ever seen...

Thank you. Probably my most expensive build to date.
Combo tool as can opener works very well. I use one almost 3 times a week for canned tuna and it works exactly as it should. The yeoman is without a doubt the best tool layout for urban environment.
-
Gotta have Alox. Gotta have a symmetric 3 layers so I can have a pocket clip. Gotta have pliers! 3 layers and pliers means I can't have both openers. I have a Stanley pocket screwdriver at home, in my car, at work, and in my bag to cover extra Phillips and flathead needs.
A custom Alox SAK would be my pocket knife + extra. Not my entire toolbox. I love the small Vic pliers. They're like a small pair of metal fingers in my pocket. I think people over look the pliers because they have to in order to get the other tools on their SAK and still have it be comfortable in the pocket. I have to have the slimness of Alox and screwed on pocket clip. The plastic scales + suspension clip is too long and thick.
Combo tool does a little bit of scraping/poking/awl-ing, a little bit of Phillips, a little bit of flat heads, a little bit of prying, and bottles & cans. For me, it's not combo vs seperate openers, it's combo vs awl. I still choose combo though.
Clip >
Scissors >
Combo tool > < Blade
Pliers >So my point is I like Pliers over 3D Philips & mag glass.
Or you can just SAK up and carry a Spirit X :P -
Well see that's the thing. On paper the combo tools is great, in pratice I personally dont like it. The combo tool does not replace a dedicated opener layer. The versatility of the bottle opener / can opener are part of what makes a SAK a SAK to me. The combo tool is much thinner and much more flimsy. Its ok as a can opener, but aweful as a pry tool, bottle opener, screwdriver.
Now that being said, I would still prefer an explorer without the mag glass. If I could do the phillips across from both openers trick on a 91mm SAK that is a big winner to me.
- small blade / main blade
- scissors
- phillips / can opener / bottle opener
The closest stock model to ideal to me is a super tinker. That is 3 layers of awesome tool right there. Or deluxe tinker if you are ok with 4 layers.
I started to write a response, then Syph said everything I was about to, even mentioning his Alox mod of the phillips across from the openers (which I need to get one of these days :) ) My usual carry is a Super Tinker, occasionally an Explorer if I can deal with carrying an extra layer.
I do still miss the Yeoman though (traded it away), even if only for light duty use. Might have to make up another one someday.
what kind of bottles are you guys trying to open with the combo tool??
I agree that it doesn't stand up to prybar-like use. I haven't tried opening a can with it, but I'm guessing it won't do too well. But I've been carrying a Yeoman around the house lately (thanks eddie!), and the combo tool opens my evening beverages without any problems at all...Glad it's getting put to work :D As a cap lifter, the combo tool is fine. As a screwdriver, I had some concern about using too much torque (especially at the 90-degree position). As a prying tool, that's where it bent. I realize it's not sold as a pry tool or anything, but I've often used the standard cap lifter as a pry tool and it does fine. So that's my internal debate, give up a little sturdiness or give up the slim 3 layers...
-
@mrog said:
Gotta have Alox. Gotta have a symmetric 3 layers so I can have a pocket clip. Gotta have pliers! 3 layers and pliers means I can't have both openers. I have a Stanley pocket screwdriver at home, in my car, at work, and in my bag to cover extra Phillips and flathead needs.A custom Alox SAK would be my pocket knife + extra. Not my entire toolbox. I love the small Vic pliers. They're like a small pair of metal fingers in my pocket. I think people over look the pliers because they have to in order to get the other tools on their SAK and still have it be comfortable in the pocket. I have to have the slimness of Alox and screwed on pocket clip. The plastic scales + suspension clip is too long and thick.
Combo tool does a little bit of scraping/poking/awl-ing, a little bit of Phillips, a little bit of flat heads, a little bit of prying, and bottles & cans. For me, it's not combo vs seperate openers, it's combo vs awl. I still choose combo though.
Clip >
Scissors >
Combo tool > < Blade
Pliers >So my point is I like Pliers over 3D Philips & mag glass.
Or you can just SAK up and carry a Spirit X :PI've done combo/blade/pliers/scissors a couple times on alox. It is a nice slim package if you need pliers.



-
@rickinFL said:
Love my yeoman. Combo tool as can opener works very well.
As mrog already said:
@mrog said:
Combo tool does a little bit of scraping/poking/awl-ing, a little bit of Phillips, a little bit of flat heads, a little bit of prying, and bottles ...but indeed is a great can opener

So, of course, as a screwdriver/prybar the combo tool can't compete with "openers" (in prying, scraping, orange peeling >:D, large SD, small SD ...), but that is the "no-openers tax" one have to deal with :D
-
I definitely prefer the Explorer to the Yeoman. The separate openers/drivers are much more useful and effective than the combo tool (and you get the awl), and the small blade on a SAK is my most used tool. I've built two Yeomen (sold one, the other's in the toy box) but keep breaking Explorers for the phillips driver for other knives. Traded the last one for a Cybertool. :) I really ought to get another for keeps. If I had to go for three layers instead of four, I'd go for the Super Tinker instead.
-
@jerseydevil said:
Honestly I prefer the Explorer. Why? One of the most important uses my SAKs have is light prying and opening paint cans using the flat driver/bottle opener. The combo tool isn't thick enough for this. I've tried it several times with different knives including a Yeoman, and I've stopped because each time I was afraid I was going to break the Combo tool! :ahhh I have no problem pocket carrying a larger SAK, my Swisschamp sees plenty of pocket time, attached to a belt hanger to keep it vertical. Never had an issue.I'd for the explorer too!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login