NEW Leatherman SURGE owners club.
-
Or like ducttapetech says:
@ducttapetech said:
Get a Surge and come to the Darkside.I`m really happy with my (female :D) Surge, I work as a service technician and use it every day.
-
What kind of Service Technician?
Sent from my iPad using Tapatalk
-
I work in a big company and I am responsible for the maintenance of all the Industry machines over here. That means everything like electronics, hydraulic, pneumatics, vacuum pumps and so on. If something does not work, they call us :D
-
My biggest problem is the LM prices are horrible in my country and it's hard to have a look on the selected one.
e.g. : surge 250 $ wave 200 $ charge 300$
Welcome to the club, brother...pretty much all non-US coutries have the same issue when it comes with overblown multi tool pricing, and that's not just for Leatherman MTs.
I own close to 20 multi tools purchased over the last 16 or so years, and only the very first one my wife bought me on our honeymoon in Italy was the SAK Swiss Champ purchased in brick and mortar shop. All others were bought online mainly thru Amazon and eBay, usually at 1/3 of the price I would pay in NZ and previously in Cro for a particular model.
So my only suggestion to you would be - when it comes to sourcing of MTs, stick to online sources, most of those will have "for USA sale only" designation on their boxes but who cares really, these aren't life-or-death instruments, they're cool gizmos and contraptions most of us could live without anyway ;)
Cheers!
Hey babola
My biggest problem with ebay\amazon if i buy them with the shipping cost and if i order something abroad from the EU with the taxes it will cost around a same amount of money maybe 20 $ less or something.
Maybeeeee, one of these gentlemen in the us can disassemble one if you pay shipping and price of lm. if a knife is prohibited in your country? Just nee 2(two) t-10 security bits to put it back together.
-
I can join this club

Electrical Engineer working in a Manganese smelter. The tradies get a bit funny sometimes if you pull out any sort of tool and have a go (mostly jokingly) if they see the uninsulated kind, to which I reply I know what voltages I'm using it on

Wouldn't use it on anything live without testing for dead first.
-
You're not in until you post pics...

So I'm not in yet either...
-
Some pics of my Surge :D



I like the Surge more every day :)
-
Nice looking tool!
-
It's official now, here are some photos of my Surge, it is a user:
Here is the repair I made to the sheath after it broke on me the first day I had it >:(. any better ideas for a way to tie the cord I'm all ears. Not pretty, but it works
Coupled with a LED Lenser P2, for those times when a small amount of light is requred
-
Nice Surge!
Haven't seen a sheath do that the first day! The only thing I can think of is get a scrap piece of leather and make a new loop. Or add a clip like on the back of a tape measure. -
The Molle XL sheath made by leatherman may be an option as well - if you are willing to spend the money.
-
-
Even without owning one .... you´re still a sort of ambassador for the Surge. :D
-
@ducttapetech said:
Nice Surge!
Haven't seen a sheath do that the first day! The only thing I can think of is get a scrap piece of leather and make a new loop. Or add a clip like on the back of a tape measure.Thought about another piece of leather or webbing, but would need some rivets or posts to do it. Had the cord and gave it a go. You can see my rant on the sheath over at Leatherman website. Thought of getting the XL molle sheath but prefer the snap.
-
Just got my BO new surge but the main blade pivot is loose and then tightens up to the point where I i can't even open the blade...any suggestions?
-
I took longer than most members to join the Surge club but I finally joined.I am impressed with the fit and finish of this tool.
The only mod I made,in the short time I've possessed this tool,was to polish the plier head so the seam of the casting doesn't readily show.It does bother me a little bit that the plier head is cast rather than forged and I don't like to be reminded of this fact with the presence of that annoying seam.


-
@toolguy said:
It does bother me a little bit that the plier head is cast rather than forged and I don't like to be reminded of this fact with the presence of that annoying seam.Same here. Die casting pliers isn't cool but it shouldn't matter much as the LM pliers if and when they break they break at other places like the tip and the pivot point. It does keep the overall cost of production down, though.
Welcome tho the club.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





