The Hacked Leatherman Owners Club.
-
Would love to have a go at polishing my Wave once I get home.
Anyone know of a thread or guide how to go about something like this?
-
@hiraethus said:
Hacked Wave with Wingman scissors, small bit driver removed and awl/small flat driver added:

Not sure how I missed this but did all the parts you added come from the Wingman?
Also is the Scissors mod a simple drop in?
Thanks.
-
@hiraethus said:
Thanks! Not the pliers, but I did sand down the plastic liner next to the scissors and ground about 0.5mm of the thickness of the Phillips driver to give the scissors more space. I had to add a thicker washer between the pliers and the liner to take up the gap - I should have left a thicker portion at the pliers end.I didn't even think of sanding down the liner -- great idea!

-
Hacked Wave with Wingman scissors, small bit driver removed and awl/small flat driver added:

Not sure how I missed this but did all the parts you added come from the Wingman?
Also is the Scissors mod a simple drop in?
Thanks.
Looking at the pic, the scissors definitely came from a Wingman, but it looks like the small flat driver is the Kick/Fuse/Blast variety, and the awl looks like a ground-down large flat driver.
The Wingman scissors are not quite a straight drop-in; the pivot hole needs to be enlarged to fit the Wave pivots.
-
^^ What he said.

I had to tickle a tiny bit off one corner of the saw too, so it locked easily when I moved it to the serrated blade slot. The small flat driver is modified too, to clear the lock pivot.
-
So I just went though this whole dang thread. Came here thinking I would do a little research but pretty much knowing what I wanted to do to my Wave.
Add Rebar head and Awl. Lose the stupid mini driver.
Now I am thinking some kind of outside Vic Scissors, S30V blade, Rebar Awl and Head but have no idea what to put in the mini driver spot if the awl goes into the scissors spot.

-
@Lichtbote said:
:D
That reminds me i have to work on the refurbish of my polishing machine (atm still a big bad 12" grinder).

I wish I had a machine for this, I use old manual elbow grease method :(
It's long and tedious process doing this by hand, but a labor of love. (I'm sure there's a dirty joke somewhere there :P)
-
@babola said:
I wish I had a machine for this, I use old manual elbow grease method :(It's long and tedious process doing this by hand, but a labor of love. (I'm sure there's a dirty joke somewhere there :P)
Check ebay/craigs list/local newspapers for sale pages - look out for an old, bad looking and cheap bench grinder - as big as possible (bigger means more power). If it looks like crap they usually go cheap. All it has to do is still running (maybe have an electrician check the old cables for todays standards) - then you can disassemble it´s pretection covers and the grinding wheels. Then check the size of it´s axle, and go to ebay (or search the net for shops) to look for the right sized polishingwheel adapters.
With some time for a good offer you should have a polishing machine at the end, for under the price of a Surge.

(For the good feeling i usually disassemble my machines, put new bearings in, some new paint. But that is rarely really needed for proper function.)
-
I wish I had a machine for this, I use old manual elbow grease method :(
It's long and tedious process doing this by hand, but a labor of love. (I'm sure there's a dirty joke somewhere there :P)
Check ebay/craigs list/local newspapers for sale pages - look out for an old, bad looking and cheap bench grinder - as big as possible (bigger means more power). If it looks like crap they usually go cheap. All it has to do is still running (maybe have an electrician check the old cables for todays standards) - then you can disassemble it´s pretection covers and the grinding wheels. Then check the size of it´s axle, and go to ebay (or search the net for shops) to look for the right sized polishingwheel adapters.
With some time for a good offer you should have a polishing machine at the end, for under the price of a Surge.

(For the good feeling i usually disassemble my machines, put new bearings in, some new paint. But that is rarely really needed for proper function.)
Thanks mate, I think my manual method will have to do for a while, though. :P
-
@HarleyXJGuy said:
So I just went though this whole dang thread. Came here thinking I would do a little research but pretty much knowing what I wanted to do to my Wave.Add Rebar head and Awl. Lose the stupid mini driver.
Now I am thinking some kind of outside Vic Scissors, S30V blade, Rebar Awl and Head but have no idea what to put in the mini driver spot if the awl goes into the scissors spot.

I used the Wingman scissors on my hacked Wave over the weekend. They're not very good. :( Might have to swap them for some Vic ones instead.
-
Sidekick is on sale at Home Depot for $24.88 for all you hackers.
-
@hiraethus said:
I used the Wingman scissors on my hacked Wave over the weekend. They're not very good. :(What's wrong with them?
-
They're ok on threads and paper but on paracord, fingernails and cable ties they just push whatever you're cutting out the front of the scissors. I'll try sharpening the blades and see if that makes a difference.
-
@hiraethus said:
They're ok on threads and paper but on paracord, fingernails and cable ties they just push whatever you're cutting out the front of the scissors. I'll try sharpening the blades and see if that makes a difference.Ah, gotcha.

I agree, try sharpening them first before you discount them as an option. I am of very few who prefer Wingman scissors instead of Vic ones in the Wave

-
I been doing a lot of thinking about this whole scissors situation. Have had my stock Wave on my side for a couple of weeks now and I am trying my best to find uses for the scissors but to no avail.
It is not that a knife would work fine but I can not even find stuff that scissors would be good for. Maybe cutting errant strings off my uniform. That is about it.
Look forward to December and not having scissors again to see if I miss them. Thinking I will not though.
On the plus side of this it will save me some money modding tools to have scissors and make carrying my Old Cross Pioneer easier.
-
I wouldn´t have any use for the tiny Wave scissors, too. In fact i next to never used to have scissors with me, and i never missed them.
But i admit ... since the Surge is on my side, i found myself using it´s scissoers from time to time. Not nearly to a daily basis, but when i need them they are big and good enough to do the job (mostly cutting bandaids :D, but also other things like those very small electrical cables, paper, ....).
-
Yeah Lich. Very infrequent use is what I am thinking, if at all. No way I will need them so much they should be on the outside of my tool.
As for the small size I have a SAK Evowood 18 on the way so we will see if maybe size matters.

-
I really only use my scissors to trim the straws on my kids drinks at a restaurant if the straws are too long. Other than that..... this thread got me thinking, what do I really need them for?
I think I'm gonna save room on my full size lm to utilize it for something else, and just carry a micra type tool on my keys -
@JBW1 said:
I really only use my scissors to trim the straws on my kids drinks at a restaurant if the straws are too long. Other than that..... this thread got me thinking, what do I really need them for?
I think I'm gonna save room on my full size lm to utilize it for something else, and just carry a micra type tool on my keysMy plan is to pretty much own the SKTC and win me a Micra for my keyrings.

-
I have a SAK Alox Classic on my key chain. Small scissors but the are precise and sharp. I cut an occasional thread, hang nail, fingernail, and coupons. I could live without them in my multi-tool though.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login