The Hacked Leatherman Owners Club.
-
I had to tickle a tiny bit off one corner of the saw too, so it locked easily when I moved it to the serrated blade slot. The small flat driver is modified too, to clear the lock pivot.
Not (yet) a Wave owner but I have a plan for a "Knifeless Wave". Couple of questions. Firstly taking account of length only could a 3D Phillips be made to fit in lieu of the bit holder?
Secondly the saw locking edge would have had the opposite bevel, presumably why it needed a bit of a grind. Once ground did it lock as securely as in the correct bay?
yes, the 3D Phillips from a Rebar/Blast/Fuse/Kick/etc. can be installed in place of the bit driver, but you'll need to either remove the blade safety lock pins or grind down the driver. take a look through the earlier pages of this thread and you'll see some examples. :D
-
@pingu said:
Secondly the saw locking edge would have had the opposite bevel, presumably why it needed a bit of a grind. Once ground did it lock as securely as in the correct bay?Yes. Well, if I'd not taken too much off it would have.
It only needed a very light touch - it may have been possible to bed it in without any grinding. -
@hiraethus said:
it may have been possible to bed it in without any grinding.Need I say it?
-
Have they stopped putting bromide in your tea or something?

-
@pingu said:
Secondly the saw locking edge would have had the opposite bevel, presumably why it needed a bit of a grind. Once ground did it lock as securely as in the correct bay?Looking again at the saw, there's a bit less than 1mm of play at the tip now, about the same as on the file (which hasn't been modified in any way). It still locks securely.
-
@hiraethus said:
Have they stopped putting bromide in your tea or something?
LOL! :D
-
Have they stopped putting bromide in your tea or something?

LOL! :D

-
Breazy and Hiraethus thanks.

If edgeing closer to knifeless Wavedom :ahhh is something to thank for. Seems extreme but I can't resist diamond coated files and I have something in mind for the small scissors and the bit holders.

-
Wanted to show off my SURGE ALX in progress:D. What ya think? Suggestions? Critiques? Questions? I'm gonna make a few long bits like the one pictured. I wanted to keep all the straight drivers on one side.
Does anyone have a charge alx serrated\gut hook blade they want to trade for parts I may have. I have a wave, fuse, blast, and of course the current serrated b.o blade on my surge (new model). Or ill be happy to pay as well. -
Thanks to JBW1, I was able to do this mod on my new style Surge.

-
@JBW1 said:
Wanted to show off my SURGE ALX in progress:D. What ya think? Suggestions? Critiques? Questions? I'm gonna make a few long bits like the one pictured. I wanted to keep all the straight drivers on one side.
Does anyone have a charge alx serrated\gut hook blade they want to trade for parts I may have. I have a wave, fuse, blast, and of course the current serrated b.o blade on my surge (new model). Or ill be happy to pay as well.Sweet looking Surge. I don't think the blade out a Charge or wave will fit the Surge. I am like you, I with the Surge SE blade had the gut/strap cutter on it. I have been thinking about modding the blade. Another idea that has crossed my mind is the Damascus blades that TxT Cafters makes. Those would sweet in a BO Surge.
-
@ducttapetech said:
Thanks to JBW1, I was able to do this mod on my new style Surge.Looks good! :D I do appreciate the mini driver, contrary to popular opinion here. And my wife has used the one on her wave to tighten her glasses,. I see more use in one, than a can opener, for my own use.
You, sir, get the enabler of the year award, A Damascus gut hook! On a BO Surge! -
Wanted to show off my SURGE ALX in progress:D. What ya think? Suggestions? Critiques? Questions? I'm gonna make a few long bits like the one pictured. I wanted to keep all the straight drivers on one side.
Does anyone have a charge alx serrated\gut hook blade they want to trade for parts I may have. I have a wave, fuse, blast, and of course the current serrated b.o blade on my surge (new model). Or ill be happy to pay as well.Sweet looking Surge. I don't think the blade out a Charge or wave will fit the Surge. I am like you, I with the Surge SE blade had the gut/strap cutter on it. I have been thinking about modding the blade. Another idea that has crossed my mind is the Damascus blades that TxT Cafters makes. Those would sweet in a BO Surge.
Just brainstorming about what you said, how would you make the gut hook? With a dremmel tool?
-
That and some files I think.
-
I thought about doing that as well, maybe print a template of the charge gut hook to the extra scale :)
-
So I made a flathead driver to replace the 2D. Its a little longer reach, although I messed up and didn't line up the ends very good, oops. Just some tapering on the sides till it fit. No more 2D drivers in my life :D
Everything closes good.
-
Sweet!
-
My "nearly knifeless" Wave and Fuse.
Fuse has regained its scissors, previously donated to Rebar, from Wave. Wave failed to get its Wingman scissors due to a smeg-up enlarging the hole
but TBH I prefer the saw and file in their own slots. Though the opener is the first tool I sacrifice for space (after the Wave precision driver :D) I like an outside opener.2D bits will fit in the unused space in the knife bays. A holiday project maybe

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login