Puma-Werk Frogman
-
That was my thought as well, but I don't really know what I'm talking about :D, thanks a ton for the link that's awesome. I read that they were also issued for the military and was set apart by a matte black handle. But I have no way of knowing since I have none hahahaha. I have some maroon trex material(the decking material) that I was debating, but I think this knife might be too nice to do that.
It really is kind of baffling, it had to have split and came off, but that would take some serious effort to crack that bad. The blade looks like it definitely got used, but that really doesn't bother me. I look forward to putting a nice edge on it, I may actually use it.(hopefully that doesn't make you cringe)
Those are both beautiful blades man, the Grohmann looks like an extremely useful blade, are those easy to come by?
-
@Aloha007 said:
Both your Puma Knives are awesome.Higgins

check the guard for a stamp.
http://www.knives.com/knives/history/115-puma-knives.html
http://www.pumaknifeman.com/GuideToCollect1.htmlI'll have my dad check it tomorrow, I wish I knew how interesting it was before I left and I would have snapped a bunch more pictures. Really long smurfy day so my head wasn't in the right place :-\
You guys are the best hahahaha
-
Sorry to hear about your Grandpa, keep your head up brother.
-
@Aloha007 said:
Sorry to hear about your Grandpa, keep your head up brother.Thank you buddy, I appreciate that. I found his "yearbook" from when he was in Basic training too, it's pretty cool. Nobody wanted it so I made sure I grabbed it, some of the pictures are just too cool.
I'm really looking forward to restoring this in his honor, and I knew coming to you guys was the best idea to get started!
-
Grohmann is a knife manufacturer about a hundred kilometers away from me so they are fairly common around here. I know a few guys in the US and UK have Grohmann knives too so I'd imagine they are fairly readily available most places. Cold Steel even makes a copy called the Canadian Belt Knife.
Def
Sent from my smurfing hunk of techno sorcery
-
@Grant Lamontagne said:
Grohmann is a knife manufacturer about a hundred kilometers away from me so they are fairly common around here. I know a few guys in the US and UK have Grohmann knives too so I'd imagine they are fairly readily available most places. Cold Steel even makes a copy called the Canadian Belt Knife.Def
Sent from my smurfing hunk of techno sorcery
Just looked both up, the Cold Steel is just a weeee bit more affordable
. But I know the quality would likely be a stark contrast, I'm going to keep them in mind. Do you use it much? -
It is one of my favorite woods knives. The only drawback to it is the deep pocket sheath that u don't really care for. Otherwise the handle and blade shape are very intuitive and natural in use.
The Cold Steel version is actually not that bad either. Admittedly it is somewhat cheaper but the textured plastic handle provides a bit better grip than the polished wood, and is also much more water resistant. It might not be as classy or traditional as the original but in some ways it is actually better- largely because you don't have to worry about maintaining the wood, and if you lose it somewhere it's less costly to replace.
But, living where I do, and being a proud Canadian I prefer the Grohmann. It's like having a classic car and the modern version. The modern one will outperform the original several times over, is more reliable and costs less than the original, but the original has the style and is just so much more of a pleasure to own and use.
Def
Sent from my smurfing hunk of techno sorcery
-
@Higgins617 said:
So I have happened into a pretty cool knife, though by pretty awful circumstances unfortunately. My grandfather's health has deteriorated very quickly and he can't go back home. Today we had to clean out his house a bit, and found the knife laying in the basement.I know absolutely nothing about it, or the company. Does anyone know what I actually have here besides a cool blade? I know it's missing the handle, but still didn't seem like something to leave sitting there.
Sorry for the bad pictures
A bad way to get such a cool knife.
I bet the handle is around somewhere.
your granddad might have taken it off to clean it up or something.
It's definitely worth taking a look for
-
@Grant Lamontagne said:
But, living where I do, and being a proud Canadian I prefer the Grohmann. It's like having a classic car and the modern version. The modern one will outperform the original several times over, is more reliable and costs less than the original, but the original has the style and is just so much more of a pleasure to own and use.Def
Sent from my smurfing hunk of techno sorcery
I totally agree with this, I look for the character since 9 times out of 10 it really isn't a make or break situation when I'm using my tools. I want something that makes me happy to use, something interesting. Not necessarily the best tool for the job. Which is another reason I'm excited to find this knife.
-
Higgins
You could try making a handle from self amalgamating tape, it would make the knife useable without damaging the knife and not too hard to remove in the future

-
If I had that, i would make a handle out of leather washers.
-
The problem with leather washers is that there's no way to get them on. The guard and pommel don't come off so there's no way to thread them on.
Def
Sent from my smurfing hunk of techno sorcery
-
Oh I thought the guard came off...darn. It would look great with leather washer type handle.
-
There's also another problem. If that knife will be used for its intended purpose the leather washers won't hold up to repeated use in water.I do like the idea though.

-
Guard will come off, with some efford. Only thing is, whom has ability to take it off. Will agree with Chako, leather pommel would look so beautiful. Then again, i would use bircbark to it.
-
When I first saw it, my initial thought was that it came with the leather washer handle and they had rotted off due to it being left in the basement for likely a long time. I'm sure I could get the guard and end off, very doubtful I could get them back on as skillfully.
I'll definitely take a look around the next chance I get, but I have a feeling it's going to come down to making a new one. Thanks for the interest guys!
-
So there is no writing on the guard, which would place it as pre-64 by those web links.
-
@Higgins617 said:
So there is no writing on the guard, which would place it as pre-64 by those web links.Interesting. I'm not sure what type handle material I'd go with.
Micarta, some type of resin, I guess if the idea is to restore it then thats one approach and if getting it sorted to be able to use is another.Good luck with whatever you decide.
-
So there is no writing on the guard, which would place it as pre-64 by those web links.
Interesting. I'm not sure what type handle material I'd go with.
Micarta, some type of resin, I guess if the idea is to restore it then thats one approach and if getting it sorted to be able to use is another.Good luck with whatever you decide.
I'm going to see what my dad's opinion is as well, since it is his dad's knife. You guys got me even more excited about it! I'll be sure to keep you guys updated with what I do.
-
a quick bit of google-fu and it looks like the grip was one pc plastic of some sort. Red for civilian market black for military. But we all have seen the "military issue" claim as a market tool, misrepresentation, or flat out guess before.
I would say find a local knife maker or maybe a gunsmith would be willing to try. I say this because the skill and care of finish is a similar prerequisite for both.
But see if the pommel can be removed and reinstalled without damage, it looks like it was peened or riveted in place. If it can a new 1pc handle in the original style could be turned on a lathe. If it cant a 2ps pinned/screwed handle is going to be your best bet.
Either way I think micarta would be your best option both for the range of color and durability.
Here's a link to my local knife supply there are dozens of others on the web and around the world if you search I just have this one bookmarked already. But you can have a look at some handle materials to get an idea of your options. They aren't the best on they're color selection in some of the composite and synthetic though, but its a start.
http://www.texasknife.com/vcom/index.php?cPath=587_826


also there's 4 of these currently on ebay all with great photos
Seems these are quite valuable when complete and though "damaged" yours would still be a great collectors piece. But no amount of money can separate a family knife. I know, I still have one of my grandfathers folders packed away with what few albums I could save from my family and the dumpster they rented.Great knife and his albums too those and what they mean to your family history cant be replaced. So good luck on the project and keep your head up thorough it all.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




