'Les Stroud' Engage Multitool TEST TO DESTRUCTION!
-
Not yet, but I will add it to the 'to do' list.
So, yeah, I took the tool apart at the pivot where I thought the pin might be bent...

"Well, there's yer problem, right there!"
I put the pin on a cinderblock, and delicately (
) beat the smurf out of it with a hammer, trying to straighten it out, then reassembled the tool.Some improvement, but it's obvious to me that BOTH of the pins connecting the plier head were bent. The other one just wasn't as bad. No such sign of damage to Sidekick.
The above pic also has an interesting view of the underside of the Engage's plastic scale.

Still pretty wonky, but now the pliers close before the handles touch.
EDIT to add: I noticed it a bit when changing the location of the can opener. The screw heads on this thing 'shed metal' when you use them. The alan wrench got jammed into the screw when i was reassembling the plier head, because the screw head was so soft it let the alan wrench turn halfway across it's sides. Just a moment ago, I tried tightening the other handle opposite the can opener, so the tools didn't flop open, and had a piece of metal come off the screw head. Smurfing cheap-smurf metal!
-
Oh Les Stroud how could you!?!? HOW COULD YOU PUT YOUR NAME ON THIS?
Signed,

-
I guess being such a wide tool, more strain is put on the pivots. It's not so much of a shear force as a bending force.
-
That seems reasonable.
Okay, so, in regards to it being hammered...
I drove the big nail that wasn't used in the nail-cutting test into a piece of scrap lumber, about half way, then bent it over. I then used the plier head and hammered it under the bent nail, to pry it up. This is something similar to Jothra's test with his PST-clone.

This pic is after pulling the nail out the first time.
The only thing I can notice is that I had tightened the screws on the side with the scissors and can opener, and had it so the scissors wouldn't pop up on their own anymore. After the hammering, they popped up... and I immediately stabbed myself in the palm with their blades.
-
And because the scissors are both useless AND dangerous, they are now gone.

-
I'm not sure if any of you can really appreciate how cathartic it was snapping those scissors off.
It felt SOOOOoooooo good.

-
Drop test? From upstairs bedroom window? tool and peripherals :)
Pry test with the drivers ... or fish tickler for that matter?or the ultimate test ...
... meet Mr Stroud himself and seeing how long you can last before throwing it full force at his head and telling him what a total waste of money it is >:D >:D
-
Try hitting it with a hammer repeatedly while you shout "take that you piece of smurf!" ?
Sent from a device made from star dust using tapatalk
-
@enki_ck said:
Have you used it as a hammering implement yet?I think I misread this the first time, and hammered ON it, not using it AS the hammer. So...
So, using the same size nail pictured in the first nail cutting test post, I drove it into a 2x10 with the tool, and managed to get it nearly flush.

These aren't particularly huge nails, and I will save trying to drive monster nails for later, but for light duty... PASS!
-
I've talked about this before, but I have a weird psychological issue where if a single implement on an MT sucks terribly, then the whole tool seems like total crap to me.
Removing the scissors on the tool was like pulling a rotting tooth for me. Now, the rest of the tool can be seen in a better... or at least less terrible, light.
Sure, the philips still sucks, and the can opener only worked after taking the tool apart and reassembling... and cutting a nail wrecked the main plier pivot... and the whistle sucks, but...
Uhh...
I was going somewhere with this.
In all seriousness, it has functions that work. Cutting a roofing nail might reasonably be considered outside the realm of reasonable use. It DID cut the lighter nail, and i'm sure would handle stuff like 12 gauge copper wire quite well. The blade didn't come sharp, but took an edge reasonably, and held up to batoning. The saw worked as well as most in its price range. This tool isn't a complete fail, and I want to be clear about that. I want to be honest in this appraisal.
Also, the sheath, while bulky, is turning out to be reasonably good.
More testing ideas appreciated!
And, if you find this thread to be more fun than cable TV, maybe consider donating to the site. Grant threw in money to pay for this destruction test. The least you cheap-smurfs can do is help him keep the lights on here. :D
-
2 words - blow torch. you know for those times when your MT falls in a volcano and you have to fish it out
-
I gave up on Les after I watched his bigfoot special.

Now this sad tool isnt helping his case. The Brits have the survival show concept won for me, as Im a big fan of both Ray Mears and Ed Stafford.

-
You people are sick,just suck i tell you!
Keep up the good work

-
There might not be a lot more testing this evening, but I'm all for hearing other folks' ideas on what to try next.
Come on, guys. Let's hear those wickedly brilliant tortures!
-
Wire cutting test.
How thick of wire can it cut.
Coat hanger wire I'm betting but nothing much thicker
-
Send it to me here in Afghanistan and I will seeif it can survive the Grenade test.
Yes it is exactly like it sounds.

-
Do we need to name this tool 'Whipping Boy?"

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login