'Les Stroud' Engage Multitool TEST TO DESTRUCTION!
-
Nicely done, thanks!

What interests me the most in this is not how bad the Engage is, but how perfectly decent the Sidekick is. And given that they are the same price online more or less, it shows the value of the cheap LM.
Engage on Amazon $27.00 USD plus shipping
Sidekick on Amazon $35.60 USD free shippingElsewhere the Engage is $32.00 USD plus shipping
-
Right now, you can buy the Sidekick at Home Depot for $25. Wait until near/after Christmas, and it'll likely drop to $20.
I keep trying to tell folks that the Sidekick/Wingman are THE best entry level tools for the money. I'm not saying they're the best, but the best FOR THE MONEY. If you could buy a Sidekick at $20, drop another $10 on a firesteel and flashlight, you'd beat the smurf out of the Engage.
I got this Exotac nanostriker Fire Rod Refill to put in an altoids survival kit. It works the same as the ferro rod that comes with the Engage. This doesn't have the handle, but I didn't really need the handle. I wanted something small to fit in a kit. Costs $5
http://www.gpknives.com/exotacnanostrikerrefill.htmlI'm sure you can get a great little flashlight for $5 on Deal Extreme, or go buy a bag of 10 Fauxtons off Amazon for $5.
I might have to sharpen up the blades on a couple other of my cheapos to run the same edge retention tests to see how they do versus the Engage. It might turn out that the Engage comes in a (distant) second to Wingman/Sidekick overall, but I'd have to test other cheapo tools to know for sure.
Also, a note. The Husky MT used earlier... they no longer carry it at Home Depot. It used to be there for $10. I guess they got tired of dealing with the 'lifetime warrantee' when it broke, because it has serious issues.
</post/586830>So, folks, keep those test ideas coming!!
-
Drivers, files, and pry tools...
I decided to test the flathead screwdriver's ability as a pry tool. So, I went into the basement and found some old crusted-shut paint cans.
The Engage's old pal the Sidekick is along for the test.
Both perfrom the task, but the smurfing Engage's driver keeps trying to close on me during the test.


Okay, what's next... well I found some flathead screws. Uhhh... As a screwdriver, the Engage's flathead is a ... decent pry tool? Seriously. It keeps collapsing closed. IT SUCKS. But strangely, seems slightly better as a philips than the philips when tested on a wood screw.

Okay... Well... smurf. How is it as a PRY tool, like, a SERIOUS pry tool? So I jammed it into a gap between two boards. AND I did the same with the Sidekick's large flathead. I applied equal bend to each tool, REALLY flexing them, and...

So, heck, let's try the Sidekick's SMALL driver/file...

Uhh... OOPS!!

So... yeah... Don't pry with the (obviously) hardened small flathead driver on your Sidekick/Wingman/Rev. Just... don't.
If you're wondering what that break at the tip was about, I grabbed the broken piece with the Sidekick's pliers, stuck the flathead in a woodscrew, and overtorqued it, snapping the very tip. Yes... I broke it TWICE.On a related note, if you have a spare small driver/file for a Wingman/Sidekick you'd like to send me, let me know.
Also, I hope you all understand that I really am NOT taking it easy on the Sidekick here. The degree to which I've seen some of its components flex and return to shape has been AMAZING, but I should have known better with a hardened file.
So, anyway, there's ANOTHER file on the Engage. on the Fish Scaler! So... obviously, they hardened that larger one... right? It should snap like the Sidekick's, because, as a real file, it's hardened. ... ... Right?

NOPE!

This thing is made of really crappy steel, IMO.
And I was hoping to break me a fish scaler, dang it!
More insanity to come!
-
I love this thread so much! :D
seriously, keep up the great work, Lynn. I love the ideas you're coming up with to abuse these tools, and I'm impressed with how well the Sidekick is holding up!
and I do have a spare driver/file/ruler from a Wingman that I'd be more than happy to send you. I just need your new address. :)
-
PM inbound. Thank you.

EDIT: Also... the generosity I see at MTO NEVER ceases to amaze me.I break a tool, screwing around, and the very first response offers a fix. You guys are really great!

-
Lynn! You've solved my biggest Sidekick woe! That foolish file is all but useless, as is the ruler. The screwdriver tip does work pretty well for smaller screws though, well until you crack it into a prison shank

Seriously though, great job. I know this is technically a review of the Engage, but I'm absolutely loving the comparison to the Sidekick. People equate budget to low quality, and you're proving that that isn't the case at all.
Thank you for once again doing us all a service!
-
@Higgins617 said:
The screwdriver tip does work pretty well for smaller screws though, well until you crack it into a prison shank
I seriously cackled at this.

-
@Lynn LeFey said:
@Higgins617 said:
The screwdriver tip does work pretty well for smaller screws though, well until you crack it into a prison shank
I seriously cackled at this.

Just doing my part

-
I thought I'd make a note here, before I went to bed, about carrying this tool.
I don't like it. I don't mean I don't like the TOOL, even though that's true. I don't like CARRYING it.
I've picked it up, put it down, and hauled it from house to garage, to basement, to back yard. I've gone to the bathroom with it on my belt. It is just... annoying.
I've stuck this thing in my pocket while messing around with other stuff. It is NOT fun for pocket carry. I've slid the belt pouch on, and stuck the tool in there. Sometimes, the lip of the pouch folds while I'm trying to cram it in there, and I have to screw around with unfolding the edge of the pouch to get it in. Then, because the plier head tends to push itself slightly open, it doesn't always want to go into the sheath. When it's IN the sheath on my belt, the tool protrudes so much that it rides out away from the body enough to interfere with armswing, get snagged on things I walk past, etc.
Compare this to the much slimmer, and lighter Sidekick, which comfortably rides in a pants pocket with a pocket clip. When I say 'comfortably', I mean 'relatively comfortably, on the right side'. So, just keep that in mind. The Sidekick is desgned for right-side carry, and is somewhat annoying to try to carry left side.
I don't belt carry. Maybe folks who do wouldn't be as annoyed by the Engage's setup. But then again, I don't pocket carry either, and the Sidekick doesn't bother me. Or at least, the level to which it bothers me is trivial in comparison.
I had concerns about the velcro tabs not being big enough on the sheath when I first got this thing, and i have to say, of all my problems with the tool, closing the flap on the pouch hasn't really been an issue. Of the things I don't totally hate about the tool, the Sheath is one. It's turning out to be not too bad. The cuts in it are damage I intentionally caused, and I'm not going to fault the makers for that.
Maybe tomorrow I'll try to intentionally catch the sheath on things to see how it holds up.
-
I agree, the sheath is very nice and well made...the tool on the other hand...
I think we need a few more
. -
I'm starting to feel a bit like Jothra, in beating this thing, and being shocked both at some of the really terrible aspects AND that it occasionally stands up to abuse. What's the definition of "dichotomy?" :D
I think I have an idea for what I'm going to do with the tool today. >:D
-
I feel like a voyeur at times :DThanks for taking one for the team, Lynn. Science can be cruel sometimes... you really tested the snot out of that Les Stroud thing...

-
This thread is great! I love to see a tool put through its paces. Im not surprised the file wasnt hardened, its probably make of cutlery steel which cant be heat treated... CHEAP!
-
You could always practice your knife throwing at a board or something. :D
-
This morning's post: The Girl Who Played With Fire
(Warning, images of fire and red meat ahead)I went out into the harsh wilderness for this next test. By Wilderness, I mean my driveway. But it was cold. I mean, like, I had to wear a coat and everything.
My firestarting kit was well-provisioned, luckily.

Yes, this tool comes with a firesteel. Yes, I've tested it. No, I'm not wasting my time to build a primitive fire with a firesteel. Building the fire wasn't the point. HOWEVER the firesteel did, once again, get dryer lint to catch on fire. So, for all you rugged manly types, there you go. I used a bic lighter and a tea candle, along with dryer lint.
I also, luckily, had the dynamic duo of Engage, and his sidekick, uhh... Sidekick.

Building a 'survival fire', I alternately used the Engage and Sidekick to poke and prod the coals to life. And by survival fire, I mean I built a fire in my Smoky Joe grill, because of city ordinances of no open flames unless they're in a container. I'm HARDCORE!

This was an interesting test. I wasn't interested in testing any particular tool, but using anything available to get the job done. I tried both tools with and without gloves on. I discovered that I could extract most, but not all of the Engage's tools with gloves on. With the Sidekick, those seemingly gimmicky push-up openings actually made getting to the tools with gloves on possible. I wouldn't call it exactly easy, but doable. While both pairs of pliers are springloaded, I felt a need to keep hold of one arm of the tool to keep it from falling in the fire while I manipulated the pieces of wood. And, by the way... using pliers is WAY better than using other sticks to move bits of wood. Both saws were used to cut sticks, and the fish scaler on the Engage was used for general pokey tasks.
Anyway...
The fates truly smiled upon me, as a hunter. I was able to find some wild game. And by wild game, I mean 2 pieces of beef roast I cut into approximately 8oz pieces. I cooked them right on top of the coals, alternately using the Engage and Sidekick to both manipulate the coals and flip the meat.

I need to note here that it really isn't easy to wait for your slow camera to focus while your hand is IN A FIRE!

Anyway. I'm hardcore, so on I go.
Oh NO! I dropped my Engage into the fire! Luckily, after I took the picture, Sidekick came to his rescue, laughing his butt off the whole time.

Oh, NO again! Sidekick took a tumble into the flames as well! After a snarky "serves you right" comment, Engage rescued his companion.

Each tool spent about 5 seconds on the coals. We'll take a look at the damage at the end of the post.
But until then, with 'wild game' cooked, whatever shall I use to cut up this meat?

The wilderness was truly truly generous with its bounty today. I found both a soy sauce tree, and Franks Hot Sauce roots to flavor my wild game.

The Sidekick got his turn as meat cutter next.

So how'd they do as meat cutters? About as expected. First thing to note is that I didn't resharpen these from yesterday's edge retention test. I had to half-open the handles of the Engage to get the blade anywhere near the food. Even then, I had to do all the cutting just with the tip. However, it DID cut the meat. It was just kind of awkward. And, I need to say again, this was roast. It had bands of connective tissue. Not the easiest cut. The Sidekick worked like a champ here, better than any steak knife I've ever used.
And, when it was all said and done, how did these tool fair from their firewalk?

There is, literally, not a bit of evidence the Sidekick ever jumped into the fire. The Engage has a few melt marks, but I would call all of the damage cosmetic. Kinda makes him look all bad-@$$ and rugged, doesn't it? :D
Engage as firebuilding companion: Pass
Engage as a meat cutting tool: Marginal Pass
Engage's resistance to moderate fire exposure: Pass -
Lynn, great thread. Maybe I was judgmental to begin with, but I never think too much of the tool when I read all the spec, and hate to find myself right after reading all the tests.
The one thing that irritate me to no end is the blade edge is facing inwards towards the handles...I have read and seen many experienced outdoorsmen prefer knife without guards so they could choke up the knife for better control, and why oh why would configure the tool this way, while knowing the knife might be one of the most used tool out in the wild?
-
While I agree, this grip is always an option...

One handle of the tool is open and pointed away from the blade end. While this is a partial solution, is is REALLY not great, since it throws the balance of the tool way back and generally just makes the tool feel terrible in hand, even for short duration.
This method is how I cut the steak, and how I did the feathersticks. I don't like it, but it's better than having both handles closed, IMO.
-
Great thread you still need to do the 54R steel core ammo test. ;-)
Mike
Sent from my iPhone using Tapatalk
-
Mike 56: Thank you for your generous offer to send me a Mosin Nagant and steel core ammo. I gladly accept. PM me for the location of my FFL. :D
I actually have some friends with Mosins. Maybe I'll look into it.
Anyhoo...
I decided to test the Engage (and pal, Sidekick) by filing my nails.


Get it? Get it? See what I did there? I'm so clever.
This is the result of ten seconds of filing with both tools and as much pressure as I could muster. I didn't see any great difference between the double-cut file on the flathead driver and the file on the fish scaler with the Engage. Each removed very little material. The fish scaler at least allowed longer strokes. I have to say, I didn't notice a lot of wearing on the files.
In contrast, even the shorter-than-normal broken file on the Sidekick ate through the nail head pretty convincingly.
Next, testing the files on a softer metal, an altoids tin...

The Engage's file, while it' a bit hard to see, bit pretty deep after ten strokes with heavy pressure.
And the Sidekick...

Because of the wide and stumpy file, the work area was spread out, but not bad results. I used the same 10 strokes with equal pressure, as the Engage. No clear winner here.
Not much else to report with this one.
Ideas for more torture are always appreciated!
Engage for filing soft metal: Pass
Engage for filing iron/steel types of metal: FailAbout what I predicted.
-
@Lynn LeFey said:
I actually have some friends with Mosins. Maybe I'll look into it.That would be a great opportunity to improve your video skills

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login