Higonokami's
-
@captain spaulding said:
Oh. The large one already drew blood.
Business as usual at casa de :sailor: , ha?
;)
-
@captain spaulding said:
@captain spaulding said:
[quote author=captain spaulding link=topic=56025.msg988027#msg988027 date=1417038501]
Oh. The large one already drew blood.
Business as usual at casa de :sailor: , ha?
;)
I know, right.

That didn't take long capt. :P
All of about 5 minutes.
[/quote]Well now that's out of the way you can take pics right. :)
-
@captain spaulding said:
@captain spaulding said:
[quote author=enki_ck link=topic=56025.msg988032#msg988032 date=1417038650]
[quote author=captain spaulding link=topic=56025.msg988027#msg988027 date=1417038501]
Oh. The large one already drew blood.
Business as usual at casa de :sailor: , ha?
;)
I know, right.

That didn't take long capt. :P
All of about 5 minutes.
[/quote]Well now that's out of the way you can take pics right. :)
[/quote]I just took them out of the oven and am waiting for them to cool.
-
Which brand did you get? The one with a samurai on the other side or without?
-
I will give some of my first impression about the knives throughout the post. First off I have to say. I ordered these under the impression that they are...... well "crudely" made. It is a design that has been around for a long time. The fit and finish on these is not great. Not even good to be honest, but again I knew this before hand and expected this. From my purchases and through reading it appears every knife is "unique" in what ways the quality might be lacking. Anyways I just wanted to say that before anything. Now on to the pictures and my thoughts on the knife. These pictures are after the initial clean up.
Nothing much to say here. Just a few shots of the knives closed.
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Friction Folders/DSC02946_zpsc067193c.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Friction Folders/DSC02946_zpsc067193c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Friction Folders/DSC02947_zpsf672e636.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Friction Folders/DSC02947_zpsf672e636.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Half open.
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Friction Folders/DSC02939_zps3fc26477.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Friction Folders/DSC02939_zps3fc26477.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Full open size comparison. I ordered a medium and a large. They are smaller than they appear in the pictures. First picture is lined up from the tang. Second picture is lined up from the end of the handle.
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Friction Folders/DSC02950_zps4d33d5a2.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Friction Folders/DSC02950_zps4d33d5a2.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Friction Folders/DSC02951_zps0439b8e7.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Friction Folders/DSC02951_zps0439b8e7.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>A few pictures of the blade. The grind on these are interesting. It has 3 different grinds.
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Friction Folders/DSC02975_zpsd1b8ad6a.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Friction Folders/DSC02975_zpsd1b8ad6a.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Friction Folders/DSC02974_zpsa3f4121e.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Friction Folders/DSC02974_zpsa3f4121e.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Friction Folders/DSC02976_zpsd4d1ef6f.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Friction Folders/DSC02976_zpsd4d1ef6f.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Friction Folders/DSC02949_zpsa2b62870.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Friction Folders/DSC02949_zpsa2b62870.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Here is the spine of the blades. These are very roughly finished. Quite frankly not finished at all.
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Friction Folders/DSC02958_zpsf1908ace.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Friction Folders/DSC02958_zpsf1908ace.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Friction Folders/DSC02959_zps69eec7eb.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Friction Folders/DSC02959_zps69eec7eb.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Friction Folders/DSC02960_zps80105b26.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Friction Folders/DSC02960_zps80105b26.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Just a shot of the tang from below.
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Friction Folders/DSC02961_zps3cf60630.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Friction Folders/DSC02961_zps3cf60630.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Friction Folders/DSC02962_zps8ba1a4b8.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Friction Folders/DSC02962_zps8ba1a4b8.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Both are rough around the pivot on the handles.
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Friction Folders/DSC02966_zpscf10ede7.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Friction Folders/DSC02966_zpscf10ede7.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Friction Folders/DSC02967_zps0317ef94.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Friction Folders/DSC02967_zps0317ef94.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Centering. Both are up against the same side. Not just rubbing, but pressing quite firmly against the handle. When closing you can see the handle flex out because of this.
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Friction Folders/DSC02963_zpsd2091188.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Friction Folders/DSC02963_zpsd2091188.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
On one of the knives the inside of the handle where the cutout is the blade rubs the cutout and is very rough towards the inside of the handle. Notice the right side of the handle in the cutout compared to the left side. It is much more crude and not smooth. It also causes damage to the blade when closing and deploying because that is the side the blade is rubbing on.
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Friction Folders/DSC02970_zps8846c01c.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Friction Folders/DSC02970_zps8846c01c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Friction Folders/DSC02972_zps26988306.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Friction Folders/DSC02972_zps26988306.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>These are just my first impressions and some pictures to give you guys a general idea of what I received. Again, I knew the knife would have some quality issues before ordering, but I cannot help but think if the maker spent just a tiny bit of time looking and addressing the simplest things these knives would feel much, much better. With all the quality "issues" I do like the knives for the history and I can see using them as beaters. I will most likely make one a fishing knife as it is easy to clean and was inexpensive. I bought mine for $9.00 each. I see these things go for $9.00 all the way up to $45.00 and beyond. Average is about $15.00 - $25.00 and I assume this is because of a lot of different reasons. One reason is materials. It seems they go up a little in price if you get the brass handles. Their is also different makers of these knives which affects pricing. I am alright in the $9.00 range, but if I am going to spend a little more than that I would much rather spend the money on a Svord Peasant or Mini Peasant. I am glad I bought these for the history as well as getting use out of them, but I highly doubt I will be buying any more in the future.
The only way I would buy another is if I got it to see what this knife could be. I was thinking and if I had not moved into a apartment I would be interested in seeing how nice I could actually make one of these. Grind anything smooth that needs it. Finish the spine and polish the blade. Fix the centering and possibly drilling out the pivot for something adjustable or just re working it to be centered. Basically giving it a overhaul and making it as nice as possible.
If anyone feels the same (and has the ability and wants a project) and wants to do one for me I might be interested in ordering two and have them sent to you. One for me and one for you. All I would ask is you do all you can to make mine top notch. You can do whatever you want with yours.Anyways. That is my opinions on these so far.

-
Wow, what an epic post!

-
Nice write up Cap'n.
I knew that they were rather crude knives, but seeing the pictures I was surprised they were THAT crude. My Mercator's F&F is stellar compared to those...... -
@jerseydevil said:
Nice write up Cap'n.
I knew that they were rather crude knives, but seeing the pictures I was surprised they were THAT crude. My Mercator's F&F is stellar compared to those......Thanks. It is what it is and maybe the higher priced (different maker) ones are better, but I will not be one to find out.
-
I will be at a friends house tomorrow and might take these to mess with. If I do I will definitely be using the dremel to take off material from the cutouts so it does not damage the blade as much. I might also give the spine of the blade a go and try to finish it a bit. Not sure what I will use to do it though. Any suggestions? If all goes well I might try to polish the blade as well. I would love to be able to fix the blade centering if possible. Any suggestions on that? Thanks everyone.
-
Daddy like.

Modern day Higo.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
@captain spaulding said:
I will be at a friends house tomorrow and might take these to mess with. If I do I will definitely be using the dremel to take off material from the cutouts so it does not damage the blade as much. I might also give the spine of the blade a go and try to finish it a bit. Not sure what I will use to do it though. Any suggestions? If all goes well I might try to polish the blade as well. I would love to be able to fix the blade centering if possible. Any suggestions on that? Thanks everyone.Any metal file, diamond file or sandpaper should do. I imagine you could bend the handle easily enough but is it possible it rubs on purpose to keep it from randomly opening?
-
@captain spaulding said:
I will be at a friends house tomorrow and might take these to mess with. If I do I will definitely be using the dremel to take off material from the cutouts so it does not damage the blade as much. I might also give the spine of the blade a go and try to finish it a bit. Not sure what I will use to do it though. Any suggestions? If all goes well I might try to polish the blade as well. I would love to be able to fix the blade centering if possible. Any suggestions on that? Thanks everyone.
Any metal file, diamond file or sandpaper should do. I imagine you could bend the handle easily enough but is it possible it rubs on purpose to keep it from randomly opening?
Great. Thanks. You are probably right about it rubbing to keep it from opening up on its own. The rubbing is something I can live with. I just want to clean up the jagged edge the blade is rubbing on right now and possibly finish the spine a bit. If all that goes well I might give polishing a go.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


