'Les Stroud' Engage Multitool TEST TO DESTRUCTION!
-
@Lynn LeFey said:
Another test.What happens when you drive a Hundai Santa Fe over the Engage, and his pal the Sidekick?
Description of results to follow...
EDIT: Also, yay! my first video of the thread! You can see the tools run over in live action!
EDIT AGAIN!: So much for the 'no posts over the weekend' thing, huh?Awesome
-
Just wanted to give an idea of the true bulkiness of this tool.
It is as thick as a Leatherman PST is WIDE.

And about the volume of 3 PSTs side-by-side.

Yes, I know, that's only ONE PST, and two knock offs. They've for visual representation. Use your imagination. :D
-
Okay, after the scissors, maybe the tool I hate the most on this thing is the philips. It is, as far as I could tell, more or less completely useless.
So, I think at some point I said that the philips on the Micra is better. Well, I just tested that, on wood screws.
And it's true. with enough effort, I could get the Micra to unscrew a wood screw. The Engage would just cam out every time... and leave little bits of metal behind.
Okay, so what about as pry tools? I'd also said that the shaft on the philips of the Engage didn't look any thicker than the Micra, so...

Would you prefer your tool to bend or break?

Please, do not lament the damage to the Micra. This was a complete beater of a tool, almost frozen solid with rust and gunk.
Engage's philips as a screw driver: Fail
Engage's philips as a pry tool: FailMicra's philips as a pry tool?:

EDIT: I thought I'd also mention, that stupid smurfing philips collapsed on me again, and I raked my knuckles on the bench that had the screws I was testing on. I smurfing HATE the Engage. Smurfing pile of Smurf!

-
That's an impressive bend right there. Thanks for the pics with the PST's, really gives a better idea as to how fat that sucker really is.

-
Micra abuser
-
So at some point Lynn do you plan to give us an idea of how you feel about the Engage?
Seems to me that you like it but just wish it was maybe a little less in price?
Maybe if you was more clear is all I am saying, thanks.

-
Les must have a facebook page. We need to get show him the quality product he's endorsed!
-
Les must have a facebook page. We need to get show him the quality product he's endorsed!
Now that's a dam good idea.
I'm going to search fb now
Done.
I don't think his fb page is very active though.
Ha! That's exactly what needed to be done, nicely played Joel.
Great review Lynn, thanks for the hard work.

Stew...
-
@HarleyXJGuy said:
Maybe if you was more clear is all I am saying, thanks.
Oh, yeah, you definitely NEED to own one. Not everyone. Just you.

In all truth, I think my overall impression is that not every single function is a fail, but overall, it's abysmal. Pliers seem pretty good, and the saw is adequate. The firesteel works pretty good. The rest ranges from 'meh', to downright dangerous.
So... TLDR...

I know you were joking, but I just want to be very clear.
-
I own one...and it shall be a hanger queen...as I would never want to be caught out in public wearing it!

No surprises here. It does't even try to resemble something of quality.

-
Needless to say as it's been said and we understand the reasons why but really? I wouldn't put my name on that POS, surely there were other offers for him to consider. Money can be a smurf so again I understand but WOW what a sad sad, dare I call it "tool".
-
Survivorman - Les Stroud
Survivorman - Les Stroud. 287.765 Follower · 17.217 Personen sprechen darüber. Welcome to the official (and real) Les Stroud page!
(www.facebook.com)
-
Cant find any comments about the tool there, but I suck at facebook.
Sent from a device made from star dust using tapatalk
-
Stuff like this really is sad, especially for us. People sell out like it's not even a concern, I would refuse to put my name on anything that didn't far exceed any expectations I had because the last thigh I want is my name sullied.
On the other side, it's a real let down for us because there was so much potential. It could have been the revival of a historic brand and another serious entry into our favorite market. But instead of something for us all to get excited over, we get trash.
-
Sure, but you have to admit, it IS providing us all some entertainment. :D
-
WARNING: This post is straight-up abuse. However, we do learn some things.
Engage faces his worst nemesis, the Paver: a 15 lb concrete paving stone, and his trusty sidekick Sidekick is nowhere to be seen!
Will he survive?
Test one, a sharp blow from the paving stone, dropped at about three inch height onto the tool while it lays flat.

The rubber/plastic grips did a fine job of absorbing the hit. plastic handle popped out but no huge damage.
Next, three hits on the tool, again from about three inches. The tool is on its side. First hit at the tool pivot end, second mid-tool, and third at the plier end.
Damage? Broken plastic hand insert is now broken off.

The Paver takes a break for a minute. Here I use a hammer to drive the plier jaws shut, cutting a heavy nail in half.

Results? Holy... smurf! Seven hard blows on the plier heads with a hammer, and the nail cuts. Nothing but scratches on plier head. Tip of the nail went flying off, and is nowhere to be found.

Back to the paver. I repeated the three-drop test, this time at 6 inches. The tool end takes a serious hit...

The 'backspring' broke off. This not only prevents ANY kind of tool retention in the open position, it also allows the tools to swing freely THROUGH the handle...

As that blade now presents REAL safety issues, it was necessary to do this next, obviously abusive test on the blade. Can it cut through a paving stone?

Of course not. It was really about grinding the edge off that blade.
I forgot to take a pic of it, but I also propped up the plier end and dropped the paver edge onto the plier jaws just forward of the pivot. SEVEN TIMES, at 6 inches. No damage besides scratches.
I dropped the paver on the tool while it was closed with plier head up, four times from 6 inches.
Holy... crap. All the intentional abuse done to the pliers, twisting, hammering, driving the jaws closed on a nail with a hammer... The plier head on this tool has proven incredibly strong.

Credit where credit is due: SUPER PLIER HEAD WIN!
-
Great post Lynn.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login