Charge saws
-
SWEET!
That looks really cool! I saw that on the "other" forum as well and wondered how it worked. I guess now I'll find out for sure!
Def -
Update:
Did some test sawing today. A rusty nail on the back gate has been ripping holes in my jeans for years. Not anymore. I used the white blade (Milwaukee brand, 24tpi) shown above. No problems. Attachment to Charge felt very secure.Minor issue: I need to make the blades about 1/4" shorter. At their current 4 inches long, the end hangs out when I slip it in behind the bit kit in my sheath.
Back in the garage, I put a 3/8" bolt in the vise and proceeded to make it shorter. Took awhile to cut through, but eventually made it. Not as quick as a full size hand hacksaw, although I didn't expect it to be.
So far, so good.
-
Cool I am gonna have to try that.
-
How much conturing of the shanks does it take to fit them in the receptacle?
-
Now that is a really good idea ;D
Dunc
-
@prime77 said:
How much conturing of the shanks does it take to fit them in the receptacle?Unfortunately, it takes a bunch of contouring. Where I first read about the idea, some guy traced the shape onto a Sawzall blade and contoured it with a Dremel. Sounds like a lot of work, with a lot of opportunity for error. Fortunately, I happen to know someone who works at a machine shop. ;D So instead of a Dremel, I used one of these:
http://www.mazakusa.com/processpage.asp?lngProcessID=7
It takes less than three minutes to contour the end, and every one is perfect. -
Anybody else wanna try one of these? I've got a few extra of the Milwaukee blades. (white blade in the picture, metal-cutting blade, 24 teeth per inch)
I have absolutely no interest in selling these. But, I can make them pretty easy, and most people can't. So if you're a Multitool.org member, I'll send you one for free. Only condition is, you come back here and tell us what you cut through. And tell us (good or bad) how well it worked.
~Bob
-
Thats really cool. I'd love to try one out.
-
PM sent, it will be in the mail tomorrow.
-
Thanks, I can't wait to try it out. 8)
-
Any chance I can get a link for some info on how to make these? Sounds like fun!
-
Hi 665ae,
Here is where I first read about this idea:
http://www.equipped.org/ubbthreads/showflat.php?Cat=&Board=survival&Number=36164&page=&view=&sb=&o=&vc=1But I'm not steady enough with a Dremel tool like he used. A CNC milling machine works a lot better, but not everyone has one of those in their garage.
PM me with your address and I'll send you one of mine.
~Bob
-
@J-sews said:
Anybody else wanna try one of these? I've got a few extra of the Milwaukee blades. (white blade in the picture, metal-cutting blade, 24 teeth per inch)I have absolutely no interest in selling these. But, I can make them pretty easy, and most people can't. So if you're a Multitool.org member, I'll send you one for free. Only condition is, you come back here and tell us what you cut through. And tell us (good or bad) how well it worked.
~Bob
Nice of you to offer! :) PM inbound. ;D
G.
-
Update:
Thank you to everyone who has contacted me. So far I've got blades going out in four pieces of outbound mail, and am looking forward to hearing some feedback!Be aware:
Only four current Leatherman models have this same lanyard ring/belt clip receptacle; Charge Ti, Charge XTi, New Wave, and Surge.Bad news:
The saw blade idea will NOT work in my Surge. :( It has a little cast rounded D-shape component at the end of the handle, which is only held in place with the one screw. During sawing motion, the Sawzall blade overpowers this one screw and flops around uncontrollably.Good News:
The saw blades are held quite securely in place on both Charge models I own, because of their one-piece titanium side plates. :)Unknown:
I don't have a New Wave to test out. ??? However, I'm hoping JoeBW or Ice Tigre can let us know how it works in their Waves.~Bob
-
Thanks Again Bob!
I'll definetaly let you guys know how it works! I've got a couple ideas for mods to the tool itself to fix the (if it doesn't work) problem, but I'll have to wait and see it first .
Later
Gary.
-
I recieved a modified sawzall blade from J-sews today and imediately tested it out. First the blade fits securely in the pocket clip attachment of the Charge with very little wobble, less wobble than the blade adapter of the Surge if you believe it. I used the blade to cut through two nails with no problem at all. Then I fixed a metal strip that had come up on my porch. I cut the end off and then filed it down with the diamond file. Fixed! now I don't have to listen to my wife nag any more. :P In the nice letter sent from J-sews he said he didn't think the blade would fit in the New Wave. I dug out mine and tried it out and was surprised to find that the blade while a little harder to get in the PC attachment fit in and had absolutely no wobble what so ever. It was as solid as a rock. Thanks J-sews
-
You're welcome prime77, glad it's working for you. I'm also glad to hear that the blade fit and worked in your Wave. (I had my doubts, but wasn't sure.)
BTW, I was contacted by someone direct from Leatherman today, who had read this thread, and was asking for more details and a sample. I was happy to oblige.
Welcome to Multitool.org Leatherman!
-
Leatherman might not be the only company keeping an eye on what we are building here... ;)
Glad to see that they are interested in your saws though. I think it would be really awesome if Leatherman started production on them!
Def
-
I think that it would be great if leatherman started production of them also. I used the one J-sews sent me some more today with the Wave and it worked great. It works just as good if not better than the Surge blade adapter. The Surge outer handles tend to hurt your hands the way the plier handles of the Pst did. But the Charge outer handles didn't bother me at all.
-
I tried to make some wood saw blades today with a dremel. You would have to be extremely good with one to get the right contour of the blade attachment to fit the charge and wave tools.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login