Black oxide finish how durable is it?
-
try handling one and then look and your hands...it scratches off very easily...
-
I wonder if different brands wear different. My BO Gerber finish was on like white on rice. It never rubbed off. Got scratched up a bit when fishing by placing it on the concrete dam.
-
My BO Blast went from Black to Grey within the first week, but has been good since then.
Will get you pics when batteries are charged.
-
I'm looking at a Vic or Gerber EOD.
-
@rockyman500 said:
try handling one and then look and your hands...it scratches off very easily...No. That is remnants from the production process, it needs to be washed off or it will leech out naturally through use and carry. That is not the actual finish coming off. Also, keep in mind that the BO finish has very open pores and tends to take on a matte/glossy coating the more it is handled since oils from the body absorb into the finish. When properly decreased, every BO tool I've seen has a stark flat finish that appears a lighter black, almost grey color.
Although there are several different ways to do it; black oxide, like most finishes is very dependent on preparation before application. Sometimes it flakes off easily, sometimes it won't even scratch off with a knife blade. But a proper application will usually yield a fairly durable finish that seems to be more prone to gentle polishing off by contact with fabric and resistant to scratches from metal/dirt. Overall, I would rate the BO finish as fair to poor in the scratch resistant department. Just remember; the point of BO is because it looks cool, not that it actually does anything ( ;)). I don't think the point of the finish is to resist wear but is actually to hide corrosion, we found an interesting article about just how poorly BO actually does at rust resistance. I'll see if I can dig it up.
I do think the term "Black Oxide" can cover everything from low quality paint to high-tech DLC (diamond like coating), it's anyone's guess as to which finish has been or is being used by which companies.
I've got several examples of BO finishes. The best by far is on my Leatherman Blast. It was a hard use EDC tool for several months and shows hardly any signs of wear. I've also got a second hand SuperTool that is like two yin/yang of the BO finish. One handle has tons of wear, flakes and looks like crap. The other is pristine and looks great. Very odd.




Here's the BO Blast. Note the lack of wear on the knurled fasteners. This is usually where one sees the first signs of wear, for some reason this particular example shows little. Even after months of use.

-
Spoony that Supertool is

I agree with you about the black coming off on your hands , its just left over from when it was made and soon goes away . I like the worn used look like my Aussie Army Swisstool has
My mint BO Spirit now has a scratch on it :( So I guess its not mint anymore but that doesnt bother me and I think it will look better as it ages and gets carried and used .
Like you said "Just remember; the point of BO is because it looks cool, not that it actually does anything ". My Swisstool has also worn unevenly like your Supertool so it shows its not a brand specific thing .Dunc
-
Is there any way to protect the BO finish and make it more scratch resistant, and not carrying it is not an option.
-
I've noticed like Spoon has that BO tools after (extended)handling and use turn subtle shades of dark grey. The only exception I've noticed is my Swisstool. The BO finish is shiny and not "powdery" like my Supertool and SOG. But my BO *Spirit * has the same "powdery" finish

Overall I love BO tools, and don't worry a bit about scratches or scuffs...I don't know why that's such a big deal with some folks...resale value?

-
try handling one and then look and your hands...it scratches off very easily...
No. That is remnants from the production process, it needs to be washed off or it will leech out naturally through use and carry.
Well, LM black oxide still rubs off on your hands...
-
@Corrugated said:
The only exception I've noticed is my Swisstool. The BO finish is shiny and not "powdery" like my Supertool and SOG. But my BO *Spirit * has the same "powdery" finish
I've noticed that sort of thing too. Most of my Leatherman BO tools have that sort of "powdery" finish, but I have a BO Mini tool that is shiny (like the Spirit in the below pic). I'm not sure if wear causes the finish to polish up a bit, so that the only real difference between tools, is the thickness of the coating? I.e. after a while inserting and removing from a sheath or pocket wear, the thicker coated tools polish up, but the the thinner ones wear off? Like Spoony's Supertool, the Gerber multiplier in the pic below has worn more on one handle than the other.
Most of my tools weren't bought new, so I can't hold the above up as anything more than a theory, but it sounds plausible.

-
As I understand it, what we refer to as BO is not actually black oxide- I am pretty sure they are all a paint or dye or something similar, as actual oxidizing a is a process that can only be done on titanium and/or aluminum.
Comparing the finish on my black coated tools shows significant differences to the HAIII coating my HAIII Farmer, which isn't really black, so much as it's a really dark gray.
Def
-
@Grant Lamontagne said:
As I understand it, what we refer to as BO is not actually black oxide- I am pretty sure they are all a paint or dye or something similar, as actual oxidizing a is a process that can only be done on titanium and/or aluminum.Comparing the finish on my black coated tools shows significant differences to the HAIII coating my HAIII Farmer, which isn't really black, so much as it's a really dark gray.
Def
\
like the Charge AL?
-
@Grant Lamontagne said:
As I understand it, what we refer to as BO is not actually black oxide- I am pretty sure they are all a paint or dye or something similar, as actual oxidizing a is a process that can only be done on titanium and/or aluminum.Comparing the finish on my black coated tools shows significant differences to the HAIII coating my HAIII Farmer, which isn't really black, so much as it's a really dark gray.
Def
Didn't we decide that most BO tools on the market were some variation of bluing or browning? I thought Anodizing was actually the process that is limited to Alu/Titanium?
Oxidizing=Steel
Anodizing=Al/Ti other Metals?
http://en.wikipedia.org/wiki/Bluing_(steel)
http://en.wikipedia.org/wiki/AnodizingFWIW; LTG painted the scales on my '04 Charge Ti. Didn't last long at all.

Someone needs to send some emails to some multitool companies and get some answers. Or something.

-
Back in the early days of MT.O we had a thread about Black Oxide and Stormdrane found some websites with useful information. Here they are:
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login