Fenix P3D
-
I got the Fenix P3D in the mail this morning. It comes with a holster, a lanyard zip tie, a extra clicky switch and two extra rubber o-rings. This light is bright. It has 6 different settings, Turbo can be activated by clicking the tailcap then lightly half click to activate the strobe. The other 4 modes low, medium, regular and SOS can be activated by turning the bezel and clicking the tail cap for the desired modes. It's a little strange but with some practice it's easy to switch through the the different settings. Compared to the P1D on turbo the P3D on turbo is brighter to the eye. Fenix advertised the P1D at 135 lumens on turbo while the P3D at 160 Lumens on turbo.


-
Compared to the P1D and LM Charge Ti


-
With 2AA minimag LED

-
Very nice. While I could do without the SOS mode, I really like the way Fenix set up the user interface on these for the 6 different modes. The modes I use most often (low, turbo) are quickly accessible without complication. I do wish the low mode were much dimmer though--it's too much for dark-adjusted eyes at close to range.
-
The SOS seems to go very slow. Kind of like SOS for some one really bad at morse code :P
-
NutSAK, with the manual for the P3D under the user and maintenance section it says to use the Turbo mode sparingly do to excessive amount of heat build up problems. Can you mess up the LED using it on Turbo for to long or that just Fenix covering all it's bases in case of problems?
.jpg)
-
I wouldn't worry about it too much. If the light gets really warm in turbo, then don't use it as much. Fenix tends to be well within the LED durability limits on their specs.
I look at it this way... That LED will run for nearly 10 years straight at recommended power levels (which includes turbo mode). Are you going to ever run that light enough to add up to 10 years of use? I doubt it, because there will be something better come along that you want. Running it in turbo may shorten the lifespan somewhat, but I doubt you're ever going to see any effects from it.
-
@NutSAK said:
I wouldn't worry about it too much. If the light gets really warm in turbo, then don't use it as much. Fenix tends to be well within the LED durability limits on their specs.I look at it this way... That LED will run for nearly 10 years straight at recommended power levels (which includes turbo mode). Are you going to ever run that light enough to add up to 10 years of use? I doubt it, because there will be something better come along that you want. Running it in turbo may shorten the lifespan somewhat, but I doubt you're ever going to see any effects from it.
Thanks
-
Nice new toy Prime!
Uh, seems like you guys already mentioned this somewhere, but what batteries does this thing take again?
-
It takes two CR123s

-
@NutSAK said:
Very nice. While I could do without the SOS mode, I really like the way Fenix set up the user interface on these for the 6 different modes. The modes I use most often (low, turbo) are quickly accessible without complication. I do wish the low mode were much dimmer though--it's too much for dark-adjusted eyes at close to range.After carrying the light for the past few days I agree with what you said about the user interface. I keep the bezel turned so that I can select low with the clicky switch then turn it to turbo if I need the extra light.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login