Tidal Wave
-
Hey Dunc, great review on a great tool. Can I make a suggestion? I know you are out over the water and it would really be upsetting to loose your tool overboard. I don't know if anyone has told you, or if you already know, but there is a lanyard hoop already inside the Wave. It is on the saw side. If you pull the saw out, look inside where the tip of the saw was when it was closed and you'll see it. Use the small bit driver to slide it up and there ya go. Tie a lanyard on that bad boy and keep him safe. Wasn't sure if you knew about this, so I figured I'd give ya a heads up. Again, thanx for the review, and pictures, which were great.
-
@LatinoHeat said:
Hey Dunc, great review on a great tool. Can I make a suggestion? I know you are out over the water and it would really be upsetting to loose your tool overboard. I don't know if anyone has told you, or if you already know, but there is a lanyard hoop already inside the Wave. It is on the saw side. If you pull the saw out, look inside where the tip of the saw was when it was closed and you'll see it. Use the small bit driver to slide it up and there ya go. Tie a lanyard on that bad boy and keep him safe. Wasn't sure if you knew about this, so I figured I'd give ya a heads up. Again, thanx for the review, and pictures, which were great.Dunc says he uses a lanyard in the first post.
-
@Dunc said:
Mini bit driver , My opinions on this hav'nt changed and as a person who wears glasses and owns about four pairs the mini driver doesn't fit any of the screws on them unlike the Vic one which is superb . The only use I found for it was as a mini Marlin spike to get a knot out of my daughters Necklace . Oh how Leatherman would have been on a winner if they had put an awl in there instead .Depends on how old your wave is you probably have one of the early mini bit. The one came with my wave has very obtuse grind and doesn't fit anything, but the bit set I bought later has a sharp bit that works well with my glasses.
Put the bit on a sharpening stone and thin out the edge (I did it on mine), and it'll work well.
-
I love that you still have the Spirit in your bag ;)
Lovely write up mate, glad you're enjoying it :D
-
Hey Dunc, great review on a great tool. Can I make a suggestion? I know you are out over the water and it would really be upsetting to loose your tool overboard. I don't know if anyone has told you, or if you already know, but there is a lanyard hoop already inside the Wave. It is on the saw side. If you pull the saw out, look inside where the tip of the saw was when it was closed and you'll see it. Use the small bit driver to slide it up and there ya go. Tie a lanyard on that bad boy and keep him safe. Wasn't sure if you knew about this, so I figured I'd give ya a heads up. Again, thanx for the review, and pictures, which were great.
Dunc says he uses a lanyard in the first post.
Oh yeah, there it is, I just read it. Must have read over it the first time. Well, there ya go.
-
Thanks for the fun review and pics Dunc. I like how your reviews are always based on real usage out in the real world. :)
-
Great review

Like you I didn't like the bright yellow LM logo and writing on the sheath, so I used a wire brush and some paint thinner to get it off. The sheath however hold the tool so damn tight I don't EDC the Wave. Nevermind a pen/flashlight/bit kit in there also. Right now I've got something in the sheath stretching it way out so hopefully in a day or two it will be a little looser.
-
Here I up and sold my Wave last year and bought a Spirit just because of you,just kidding,I have have both,and they are part of my rotation,great article and pic's.
&

-
@Mr. Whippy said:
Great review, Dunc. I'm a big fan of the Wave/Charge series. What is it about the Charge that you didn't get on with?Mainly the cost , but also the way the Ti slabs moved about . I'm not a fan of gut hooks either .If I was to get another it would have to be an early Ti withough gut hook .
Dunc
-
Great review, Dunc!

Now that you have the Wave, you should be able to see again that the slide-out lanyard ring is really bent/curved by design... :D
On my Wave, it is more difficult to get the lanyard ring out (tighter) than on my Charge.
-
@josekym said:
Great review, Dunc!
Now that you have the Wave, you should be able to see again that the slide-out lanyard ring is really bent/curved by design... :D
On my Wave, it is more difficult to get the lanyard ring out (tighter) than on my Charge.
I use that little lanyard ring for about two weeks then Benner sent me a detachable one and I havn't looked back since .It works so well by threading it through the bottom of the sheath .
Dunc
-
Great writeup Dunc
glad you are getting on with the Wave they are a very nice MT
Good pics as well mate
:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login