Mini Prybars
-
BTW not done yet, i need to send them to hardening first.
-
Very smart mate. :) With a cord wrap those will look great. :)
-
How Mini is Mini..?

(Can't get my eyes to work properly..) ;) :D -
Yeah, you´re right, they aren´t Mini, but not a fullsize Prybar :D
I forgot, i´m gonna trim out the ends, so you can use it as a screwdriver, flathead of course.
bigger ones are 20cm/8inch smaler 15cm/6inch, 15 and 25mm wide, D2 Steel, gets differently heat threated on both end, middle stays soft as it is. -
@Argento said:
Yeah, you´re right, they aren´t Mini, but not a fullsize Prybar :D
I forgot, i´m gonna trim out the ends, so you can use it as a screwdriver, flathead of course.
bigger ones are 20cm/8inch smaler 15cm/6inch, 15 and 25mm wide, D2 Steel, gets differently heat threated on both end, middle stays soft as it is.Thanks.. ;)
A bit too big for EDC, but they look great..
-
Like Ben said, a paracord wrap ould set those puppies of beautifully

-
Like i said, these are not done yet. They gonna look like this when they are finished.

Cord wrap and kydex, you also can see the finished end on this one. -
Nice

-
Oooo, kydex as well.

-
-
My inbox is always open too
:D -
OT but, what/where are these magical places you can send things to be hardened?
-
Great more safe cracking tools
:D :D :D -
@Magnus said:
OT but, what/where are these magical places you can send things to be hardened?Here in Germany, you can send it to almost any knifemaker, i send mine to a Blacksmith i happen to know from a forum.
There are companies who specialices in. If you contact a knifemaker in your area, i´m sure he can help you in some way ;-) -
Hardening is heat treating generally. Hardening the ends only suggests to me that it is done with a flame (oxy-acetylene or similar). Tricky work as it takes a keen eye to get the temperature just right. Flame hardening is not as accurate as using a furnace but for this application it makes a lot of sense.
Those are some nice looking bars. I've made some smaller ones that are similar and they are very handy to have near. Now I'm thinking an 8 inch one would be nice in the top of the ol' tool box. The paracord finishes them nicely.
More pics?
Another Dave
-
pics are coming, send them for hardening today.
I send them to a Blacksmith, afaik, he hardens the whole thing in his furnace, packs clay (hope thats the right word) on the parts where it should be softer. This way, this parts stay soft after hardening because they cool down slower.
I´m not the expert on this, sorry folks :)they are probably black when they are done, should look like this bad boy here:

-
@Argento said:
pics are coming, send them for hardening today.I send them to a Blacksmith, afaik, he hardens the whole thing in his furnace, packs clay (hope thats the right word) on the parts where it should be softer. This way, this parts stay soft after hardening because they cool down slower.
I´m not the expert on this, sorry folks :)That makes sense. I've heard of that technique but never tried it myself.
Nice work.
Another Dave
-
MT.O run? How much would they cost? :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



