Sharpening V-Cutter Blades
-
A while back I saw a post here on someone wanting to know how to sharpen the blades on the V-cutter tool. After looking it over, and if mine was dull enough to explore a way to sharpen the blades, I came up with this.
The existing rivets would have to be removed with a tool, maybe a Dremel or drilled out carefully. Once the blades are detached, a few passes on a diamond stone would get then back to razor sharp again.
Ah-ha, now to re-attach the blades. In the past, I have had real good luck using hobby store/Home Depot/Lowes brass rod for rivets. They have to be longer than the thickness of the blade and the blade holder arms, so they protrude about 2mm on either side. A few taps with a ball-pein hammer rounds over the brass ends making your own rivets.
Like I said, I've used these homemade brass rivets over the years to make my own lock-pick handles, and other various tool handles.
-
Could you use a sandpaper belt to sharpen the V-cutter? If so, you wouldn't have to remove the blade.
My Powerlock has a scissors instead of a V-cutter.
-
Or you could just buy a new one, save you tons of trouble and probably be about the same amount of money once you factor in gas, resources, etc.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login