Failure and success
-
Well, I decided to give modding my CT34 another go. Apparently I suck pretty bad
. I realized I screwed up the drilling and was starting to eat into the bushings. Decided to try knocking the pins through, and all I managed to accomplish was mangling the outer spacers because I didn't have it supported right apparently
. I made an executive decision and thought it was best to quit while I was ahead lol. I "de-manglefied" the outer spacers enough so the damage is purely cosmetic. At first the small blade had play and the large one wouldn't open. Once I got it working properly I slapped it back together. You can see some damage to the outer spacers, but it's just cosmetic really and since it's a user it isn't a big deal. Either I'm just not meant to mod SAKS or I gotta find some beaters to practice on :DOn the positive side, while it was apart I grabbed the dremel and ground the keyring nub off. This went far smoother. I like it sooooooo much better without that keyring hole. One of these days I think I'll hit Rotokid up for some new scales. I wanna put some new black ones on there.
Someday I may just see if I can get somebody from the forum to fix it up for me. Replace those outer spacers and devastated pins/ bushings, or if nothing else at least get the opener layer removed. But if I'm gonna go so far as to pay somebody for some work, I may just go all out and have them add a mag glass layer to it in place of the openers.
-
May I recommend Mike 56. I did the same thing you did and he fixed and modded my 34.
-
I can fix it for you if you want. LMK.
-
Possibly, but right now it's not a priority. I'll keep offers in mind though for once I have a bit of extra fundage to toss around for trivial things like rebuilding perfectly functional SAKs lol. I keep thinking how much I'd love to mod in a mag glass, light layer a la Cybertool Lite.
-
So, anyone know wher eI can get a betaer cybertool? I only need the drivers layer so I can try building up a small cyber tool...
;P
-
I was actually thinking at one point that making a driver only tool, or maybe driver and pliers would be a nice companion to a larger multi. But then I lost my Swisstool, so the CT got partnered with the Spirit S instead. Which means I need the scissors, and I'd rather not lose the mini driver, so I need the corkscrew, which means I have to keep the knife layer too. So that plan went straight to Hell in a hurry lol. But really I think a CT driver only tool could be pretty cool.
-
Sorry to hear it all went pear shaped. Grab yourself a few beat up SAKs and have a practise. Everyone has to learn sometime, just best to do it on something really cheap :)
Here's my ultra minimalist CT ;)

It actually gets quite a bit of use.
-
@Neil said:
Sorry to hear it all went pear shaped. Grab yourself a few beat up SAKs and have a practise. Everyone has to learn sometime, just best to do it on something really cheap :)Here's my ultra minimalist CT ;)

It actually gets quite a bit of use.
Neil, you realize you're missing a bit, yes? ^^;
-
Neil, you realize you're missing a bit, yes? ^^;
That's what makes it <u>ultra</u> minimalist :P
Well, you've paired it down all you could go, going so far as using eco scales (nylon may be lighter, I don't know), but the missing bit doesn't make it ultra minimalist... just, means you're missing a bit. :P
-
That is exactly what I was thinking. Man that could be a handy guy to have around.
And yeah half way through I told my little brother who was watching me "you know, maybe I should have made a practice run on one of the beaters we have laying around before I started destroying my nice one" lol. I still may have a crack at the couple half destroyed beaters laying around my Mom's house if I can find 'em ( I believe a compact and a champ) both for practice and a source of parts to undo the damage to my CT. The compact nobody knows where it came from, but it's a bit rusty and the scales are broken. Nobody cares about it. The other one if I recall is a Champ which technically belongs to my brother that is really neglected and beat up, but would make a good source of donor parts once they are cleaned up. He has told me numerous times that I could have it because he has no interest in SAKs but he can never find the thing lol.
-
@Neil said:
Sorry to hear it all went pear shaped. Grab yourself a few beat up SAKs and have a practise. Everyone has to learn sometime, just best to do it on something really cheap :)Here's my ultra minimalist CT ;)
[IMAGE]
It actually gets quite a bit of use.
I love it! I like that you used a pair of solid scales. Next tme maybe you could try to put one in Alox scales.
I know why you.re missing a bit, you're looking for a T6 to put in there to make it really useful.
-
@thebullfrog said:
That is exactly what I was thinking. Man that could be a handy guy to have around.And yeah half way through I told my little brother who was watching me "you know, maybe I should have made a practice run on one of the beaters we have laying around before I started destroying my nice one" lol. I still may have a crack at the couple half destroyed beaters laying around my Mom's house if I can find 'em ( I believe a compact and a champ) both for practice and a source of parts to undo the damage to my CT. The compact nobody knows where it came from, but it's a bit rusty and the scales are broken. Nobody cares about it. The other one if I recall is a Champ which technically belongs to my brother that is really neglected and beat up, but would make a good source of donor parts once they are cleaned up. He has told me numerous times that I could have it because he has no interest in SAKs but he can never find the thing lol.
A popular first run is to make a whittling SAK. Get an old Camper/Huntsman or the like and take it down to two blades and a saw. Its popular because its only two layers, the parts are not hard to come by and its a unique non-purchasable configuration made with a job in mind.
@ICanFixThat said:
I love it! I like that you used a pair of solid scales. Next tme maybe you could try to put one in Alox scales.I know why you.re missing a bit, you're looking for a T6 to put in there to make it really useful.
Solid scales were a must as I needed a back without a corkscrew slot, so I had to use a front. Now the front tweezers slot would not line up right with the bushings on the back leaving an ugly hole so I took an old solid scale and redrilled bushing holes in the mirror image placements and epoxied it on. Due to the logo on the scale I call it my Dinky Little CT :)
No plans for an alox variant and my T6 bit (think I've only got the one :-\ ) sits on my other modded CT.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login