Skeletool???
-
I don't think that's any excuse to get serious....

Def
-
Hmm... maybe that's why I don't ever get free tools to review... :(
-
@Defender said:
I have sent this link to my contact at Leatherman, on the off chance she hadn't seen it yet. I asked for some additional information on the Freestyle and Skeletool in case they were different animals. I'll let you all know what she says.Def
I hope she responds. I'd like to hear some reassuring news.
-
Hi,
I suspect that the reason for no pictures is the following from the Leatherman newsletter.
"Last minute tweaks are being made to designs as this is being written this, so stay tuned for more information and visuals."
The SKELETOOL name has been trademarked. I think the Freestyle name would have had a conflict with the Ford Freestyle. Beretta, the firearm manufacturer collected a fair chunk of change from GM over the Chevrolet Beretta.
Joe
-
Here's the word from Leatherman:
*This year we will be shipping two tools, the Skeletool and the Skeletool CX. They should be shipping in November. Freestyle is the same concept, but just a different version. If that still comes out it won't be till '08. Here is a picture and as soon as the press is ready, I'll send something to you to post.
*And here's the Pic!
Def

-
Great stuff Def!
Hmm, ok, so this is weird, that tools looks nearly identical (no major changes at all) from the freestyle pics we have seen previously, so I don't quite understand the need to rename the tool if they are then going to release a different tool under the name 'freestyle' at a later date.
The tool in question has 'skeletool' on it so I am assuming its the non-cx version, but you have it saved as skeletool-cx Def...was it sent to you with that name? Just trying to figure out which model this is.
If that is the non-cx version, will the CX version have a S30V knife?
The handles looks cool, any idea on material? I am really really hoping the cx version has a titanium frame, but since I saw no mention of it at all in the email LM sent out, I am beginning to doubt this will be the case.
Other than this I am very glad the tools has not been changed although I do wish they had changed it to enable the bit driver to be used while the tool was closed, since ATM it doesn't seem like it can be. I notice that the pliers have a more rounded end, which if nothing else, looks better aesthetically. However I don't understand why all multitool plier heads are not made similar to the Powerplay PT540 head, where you have the wire cutter slots and the stop lock behind the pivot.
-
Bear in mind, that I know only as much as you do. I shared the entire email, except for the "Dear Grant" and the "Thanks" at the end. I didn't hold anything back so I could look cool, or like "the Man" later on, so all of this is speculation.
Looking closely, it looks like the bit driver folds outward in the picture, which means it folds inward when the tool is closed, which means that the bit driver is inaccessible when the tool is closed. Like most LM designs, it has to be opened to get at the tools. The interesting part is that it seems you can't close it again and use the bit driver like you can with older, non locking LM designs. The carabiner would likely be in the way. To me, this would suggest that the tool needs to be partways open to use it. A 90 degree angle would work, but I think straight out would make the most sense. This also would suggest that there is likely some kind of lock mechanism on the bit driver. Remember, this is all speculation, and we'll probably have a good laugh at me in a few months.
The CX is a designation it came as. I reduced the pic by 10% in order to post it, and I added the "a" on the end so I wouldn't confuse it with the original, which I also have. It looks pretty much the same, only 10% bigger.
The blade also looks like a Wave/Surge/Charge style liner lock. If you look just to the left of the "man" in Leatherman you can see that there are two pieces there, which looks like a liner lock bar.
Looking at the handle on the left, it actually looks more like carbon fiber (or an applied CF pattern?) rather than steel or titanium or anything else.
Initially I thought it might have a pocket clip, as that's what the left side of the handle looks like. But, I don't think so- not with the carabiner so prominent- it would be awkward sticking out of a pocket like that. So, what is the pocket-clip-shaped hunk of metal there? If it was another tool, they probably would have shown it in the picture as well- maybe an inset if the other side isn't as pretty as this side. What is it is really up to each person's imagination, but I am thinking (and I could be waaaaayyyy off base again) that it might be a bit holder.
Other observations I had were the shorter seeming "stubbier" pliers that are reminiscent of the SwissTool, a direction I like, and the standard Torx bits that hold it together. The open design could pick up a lot more grit than an enclosed model, and as anyone who has ever owned a CRKT M series knife can tell you, a skeletonized design doesn't always lend itself to easy cleaning.
That's my thoughts on it so far. I may have more thoughts later, but that's about it for now!
Def
-
WOW! Not a big fan of the name, but I think the tool looks really good, and most of all- fresh. It's definetly something new to the market, and I'm looking forward to seeing these and the following models.
Am I correct the Freestyle sounds like the same basic tool but maybe different materials or something like that? -
What do people think of the shape of the knife blade? It looks different from the shape I have seen on any other multitool, and I don't have much experience of folding knives, but its different from the ones I have seen.
-
Personally, I love the blade shape. It doesn't really look super heavy duty, but a great general blade that looks nice. And non-offensive, which is a big plus for some people!
-
Alright, I think I see a pocket clip. Maybe Def mentioned it but I coulden't visualize what he had typed...but here's what I see...
In your mind, close the tool...on the handle with the carabinere, there's a curved peice of metal facing us...I think that is the clip. It's fastened at the top with a torx at the pivot, and there is a ball shaped metal peice that serves as something to grip onto your pocket, probably in a detent on the handle underneath it.
The way I see it, the carabiner would be in your pocket, and the only thing showing would be that thing curved clip.
-
That "clip" is what I alluded to as being something else. Unless you get half the tool and the carabiner sticking out, I can't see it as a clip. That's why I was suggesting a small bit holder, which would be a great companion to the bit driver. I'm thinking something similar to the knives that have the cutouts for extra bits.
Def
-
I'm too lazy to keep flipping back to page one. Def, I linked to your picture here so I won't have to:

-
Here's another pic, one that we have seen before from Equipped.org's SHOT SHOW report. It shows the Freestyle in the folded position.

-
To quote; ".....There's a bit holder that unfolds out the end of the handle with the knife blade. Two double-ended screwdriver bits (the same proprietary flattened style as used on the latest Wave and Charge, etc.) are included....."
I'm thinking the bit driver unfolds from the tool while it is in the closed position. (At least I hope they had the good sense to engineer it that way!)
I also think the carbon fiber section is just one layer among several in the "sandwich" style construction of the left handle. Perhaps its only purpose is to provide the little cutout section for the spare bit? Keep in mind that the carabiner is a single sheet of metal, folded into a channel shape, that must run all the way up to the plier pivot. (Visualize: the plier head folds down and rests <u>alongside</u> the spare bit.)
I don't see a pocket clip.
-
One would think they would show it at it's best- why would they leave the bit driver open? Strange things are afoot at the Circle K...
Def
-
Anyone else see it or am I crazy?

-
Hmmmm....maybe....but that rivet head down on the end makes me think that it isn't a pocket clip?

-
It might also be a simple ball bearing type thing to help retain the clip onto the pocket.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login