Loose Wave blade
-
I believe it is a TR10 (Tamper Resistant 10 torx head). You can get TR bits at ACE hardware individually, or you can buy the drivers off eBay. The bits are about 4 bucks apiece after taxes, and the dedicated driver version is around 10 i think. Remember you need 2!
-
And remember it will be tough to start with because there will be loctite on the threads. Sometimes on tight Waves when you open the blade the screw/bolt turn with it .I've also found by turning the whole bolt assembly that it has tight spots and loose spots as you turn it .
Dunc
-
Is it a new tool? Perhaps it just needs breaking in?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login