Gerber-palooza.
-
I finally got a Shortcut to go with my Clutch. The Clutch was one of the first tools I bought from Canadian Tire when I decided to start collecting MTs. I wanted a matching pair, so I got the shortcut in that fetching red.

These are very capable tools with a good tool selection. The file Is nice and large. The only difference is one having pliers, the other, scissors.

You may laugh at this, but I was astounded to find such a small box for the Gerber Curve. I assumed it was a larger tool. I guess everyone who is selling it off of eBay is into Macro photography. Well, this tool is so small it is very cute.


Just how small you ask? Well here it is with a Vise and a Clutch.

Next up are some sheaths hiding some Gerber goodies.

The smallest sheath contained a Gerber MP400. I went for this one as it is different from the other MP400 in handle decorations. The other side has the diagonal cutouts, however this side is solid and covered in black paint for a design flair.

The next larger sheath contained a behemoth. Now, I was just as surprised at how large the Freehand is compared to how small the Curve is.


The Freehand is basically a Flik on steroids. Cool. For size comparison, a Freehand and a Flik.

Now, the largest sheath contained something a bit different. I was in for a night of surprises. The eBay seller stated that the MT was an MP600 Pro Scout. I knew differently once I saw the photo. What we have here is a Gerber MP 650 Evolution Military Tech Kit.
The inside is rather compartmentalized. Everything has its own spot for storage.

Inside, we have the tool along with the 4 interchangeable plier heads. You get a cable cutter, technician, needlenose with removable cutters and hex key, and a blunt nose.

Here, you can see the blunt nose installed into the handle.

Now, I previously had an MP 650 Evolution that came with two plier heads. I was surprised once again that the handles on the 650 that came with the military kit have these inside springs that keep the jaws apart at rest. The um..er…civilian version does not have these.
Here you see the Military Tech Kit (first row) with the other Evolution kit with both plier heads on the second row.

A side shot, showing that there isn’t any difference between the two MP 650s…

Other than those inside springs. The Military Tech Kit is on top. The other MP 650 is on the bottom. Note that tool selection is the same for both handles.

Oh and a back look of that huge storage case.

Well there you have it. I was surprised at a few of the Gerber items that came in today. I found the Curve to be microscopic, the Freehand to be larger than I thought possible, and the Mp 650 Evolution handles to be different.
-
Excellent post as usual.
I almost fell for the curve on ebay, until i saw it at a store. -
Nice bunch of Gerbers there Chako!
-
How are those springs working out? An improvement or not comapared to the "civilian" model?
-
You need a bit of force to bend those springs to close the pliers. You have to keep that force in place if you’re holding a small thin object with those pliers. In that regard, I prefer the other 650. On the other hand, it is nice that the tool is partially opened. It does make the pliers easier to handle and use. Both have good and bad things about them. I would say it is a draw.
I got a few more Gerber models in today. Still waiting for the rest to come in before I add to that Gerber Pictorial Guide.
The first is a small Gerber Eclipse. Not sure why the infinity symbol is there (EDIT: Call me slow today, that is an eclipse. Man somedays I am bright as a 10 watt bulb :D ), but it is a cute little tool. I already had several knockoffs…or did the knockoffs come out first. Shrugs. I do like the positive ball bearing position stops on the handles/scissor head. Makes the tool feel well made somehow.


A Gerber Strata. Very nice tool. Reminds me of the Urban Legend 700. I looked at the scissors that Def has some issues with, and I will agree, the potential to hurt yourself on these is there. When the blade is fully closed and you open it out fully to deploy, the top part does stick out somewhat from the rest. If you somehow manage to run a finger downwards, there is enough of a sharp point exposed to cause a nasty cut. Good catch Def. That was something I probably wouldn’t have noticed until I had cut myself. Another niggle with the Strata, I find that the lock levers tend to be hard to engage in that they are rather slippery. They are made from a hard plastic with not enough of a texture for my fingers to hold onto. Much like the Freehand and Flik, if you do engage the lock lever, it will pop out the two middle tools for easy access. The only issue being, if you release the lever, they do pop back into the handles.



Last but not least, is a Gerber MultiLock 600 Woodsman. From what little I know, it would appear to be an MP 600 Pro Scout minus the scissors. This one is still in its package, and I am wondering if I should leave it in there or not.


-
this aint no collector doll, open her up, its a tool isnt it?

-
Nice haul there Chako, still find myself liking the Strata- dangerous scissors positioning or not. :D
-
More info:
The 650 Evolution was originally made without the handle springs. After only a short time, the springs were added and kept until the model was discontinued.
The Eclipse was also offered in red finish.
The Woodsman was just one of the several special variations of the new Multi Lock (later named the model 600) There were also special models made for horsemen and bowhunters. :)
-
Thanks for the info Bob. I did not know about the special tools for the bow hunter and horseman. Do you happen to have photos of those, or explain what the differences are in tool selection, etc?

Ah, so my first 650 is the older of the two. Neat.
Charger, I suspect we might have different MT philosophies. :D
-
There are so many interesting Gerber designs; it's a shame I just don't like the stubbiness of most of the tools, or the discontinuedness of them, too. :/
.> Chako, the next thing you know, you'll have a gaggle of Gerbers. ;)
-
Working on it Sazabi.
I am still undecided if I should open the Woodsman or not. It just isn't as fun without that fondle factor.
Got a few more packages in today.
At last a Gerber Legend 800. This is larger than the Urban Legend 700.



Next up is a Gerber Crux.



That fake MP 600 DET got me thinking that I should get a real one.


-
That 650 all in one kit is very cool Chako 8) 8) 8).
I did not realise Gerber put out a cap crimping head for the 650, here I was thinking I only needed to find a Cable Cutter head & the Fisherman head to complete my 650 :( :( :(. The extra 650 heads sure are tough too find :( :(
-
I agree. I find the whole 650 model hard to find online.
Right now, there is a needlenose head on eBay. From your listings, I reckon you may already have that one.
-
I have noted its presence a few times already myself on eBay. :(
Anyways, I decided to open that Woodsman. It just isn’t fun when you can’t fondle them somewhat.

At least it wasn’t a Remgrit blade, but an honest to goodness saw. Not sure how good the saw blade is, but it does say…made in Switzerland.

I ordered a plain Gerber Diesel before the Camo Diesel. The plain Jane came in long after the Camo version, as things would have it. When I opened the plain model, I couldn’t believe my eyes. I figured I may have a Friday night special. Two Phillips drivers…oh the joy! Lol. Since I have a taste for the weird and odd, the plain Diesel just went up a few notches on the old excite-o-meter.


At first, the Gerber Artifact didn’t interest me in the least…that was until I got the Shard.

I love the small hobby style blade. The larger size means more leverage and user comfort. I very much like the Artifact.


-
Looks like you got another error on that diesel or the person you got it from did some swapping of tools. Was the silve diesel NIB/sealed? If not , it seems fishy, if it was maybe you can send it back to Gerber, not sure why you would be happy with such an error.
-
I like to find a few with mistakes on occasion. Mistakes make them more interesting to me as a collector. :)
-
Thats cool, I guess I fall on the other end of the spectrum.
-
The tool assembler must have been hung over that day
. Someone else may have gotten a Diesel with no phillip blade, but two straight-slot blades. LOL
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

