Powerlock build advice
-
So I'm sitting here thinking about my EDC and how nearly perfect it is for me, but there's some unnecessary redundancy and gaps. Every way I try and figure out how to dial it in, I wind up looking at having to get a modded SAK. I never thought to replace my Spirit S as I love the thing too damn much. Unless I replaced it with a Spirit X. This morning I had an "oh duh" moment and realized I could just build a Powerlock loadout to compliment my CT 34. Since I'm starting a new job next week and want to celebrate with a new toy I figure it might be fun to try out something new. Here's the list of components I do/do not want/need.
do NOT want:
Blade
Scissors
Can opener
Bottle opener
the rest of my EDC (CT 34, Vic Sentinel on my keys) has all these covered.DO need
Saw
File
as I use these a lot and are lacking from the rest of the EDCWANT:
V-cutter
Wire stripper
1/4" drive
could be very useful items to have around. The drive might allow for a nice way to solve my need for Allen keys if I add in the bit adapter and some bits to some sort of pocket carry case (open to ideas about carry options here)Now unless I'm missing something I can make the V-cutter, File, Saw, Wire Strippers, and 1/4" drive all fit fine, but I'm not sure how many slots this leaves me to fill in each handle. The Phillips would be nice, but I don't need it since I do most of my screw turning with the CT anyway. Same goes for the large flathead. On that note however, the biggest thing I would miss (aside from the outside opening tools) from the Spirit would be the Chisel. Pretty sure it would be simple to grind the flathead into an effective enough chisel so that's a possibility.
Anywho: what I need is some of your thoughts/advice about this build. With the V-cutter, Saw, Strippers, File, and Drive installed, which and how many slots would that leave me and what could/should I fill them with?
-
@thebullfrog said:
how many slots would that leave me and what could/should I fill them with?Maybe this could help a bit: Click. :)
-
on the powerlock there is room for 4 big things (2 in each handle) so V-cutter, File, Saw, Wire Strippers (all big) is not a problem they will take up all the outer slots, and the 1/4" drive can go where ever
Everything eles (but the Can opener and Bottle opener they don't fit in the inner most slots) can fill the 6 other spots so you might as well go for the Phillips large flathead to take up some of the space ;)
-
So first off the PowerLock has 2x6 slots. Here's what you could do:
Wire stripper Saw
_______
1/4" Drive Phillips
_______
Chisel (Made from flathead) Flathead
V-cutter FileThat leaves 2 slots left. You could put in an awl or a Robertson Drive.
For more information http://sogknives.com/store/knife-tool-care.html#tool5
-
Just get a regular Spirit... ::) Its blade is partially serrated and a different shape than the CT one so it's not redundant, and the bottle opener doubles as a prybar of sorts so that's ok as well. You only get duplication in the scissors and can opener, but the former is also a different beast than the regular Vic scissors (and seems more heavy-duty), which only leaves it down to the can opener. Fine by me...
:D -
You should start with a S62. All you would need to buy would be the wirestrippers and another flathead.
-
@Nikos said:
Just get a regular Spirit... ::) Its blade is partially serrated and a different shape than the CT one so it's not redundant, and the bottle opener doubles as a prybar of sorts so that's ok as well. You only get duplication in the scissors and can opener, but the former is also a different beast than the regular Vic scissors (and seems more heavy-duty), which only leaves it down to the can opener. Fine by me...
:DAs much as I'd love another Spirit, I mostly just wanna try out something new with this build, other wise that was the plan Nikos.
THAT'S where they moved that chart to, thank you, I couldn't find the thing this morning.
@ari6126 said:
You should start with a S62. All you would need to buy would be the wirestrippers and another flathead.The S62 was my intended starting point. Also I still have most of my BO components from my old "1.0" Powerlock I broke, so I do have some extras to play around with as well. On that note, do the older handle covers fit the 2.0? It might look kinda cool to have the black covers on the polished tool. And maybe alternate between black and polished tools for cosmetic fun lol.
-
Well, I just pulled the trigger. Ordered an S63 since I figure I may as well have the extra crimpers. I mean, why not, right? lol I also ordered a set of wire strippers from SOG. Hopefully the experiment works out. I decided that for now I'm going to replace the blade and bottle opener with the wire strippers, then move the bottle opener to the other handle in place of the can opener. This way I'll only have the bottle opener be redundant (suppose I technically could grind that part off if I really wanted though, but not worth it) and I'll have two flathead options. I'll also still be able to retain one flathead if I decide to go ahead and mod the other into a chisel.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
