WD40?
-
@Dunc said:
My wife told me to get some of this ............
She told me that if I put it all over my tool we would have a very enjoyablee evening :) She wasn't wrong
I got out all my multis and starting with a Spirit I lubed my entire collection finishing with a Vic Classic .I had a great time , its been ages since I got all the collection out on the kitchen table . I thought my wife was going to help but she went to bed really early 
Dunc

-
Where to get food grade mineral oil?
thanks guys 
-
Hey guys, thanks for all the great feedback. Seems like there is some divide over the effectiveness of WD40 as a lubricant. Well, I'll have to invest in some nano oil and mineral oil to compliment the WD40. By the way, my wife is now convinced I am a total loser for asking you guys about lubing my MTs.
Ryan
-
I personally wouldn't ever consider lubricating anything with WD-40. It is designed to displace water, not lubricate.
Though commonly repeated, this is not completely true. Not only will it help disperse water, it will also lubricate. It's even advertised as such. Really, is there any reason to believe that WD40 will not lubricate? Look it up. It's just thinned oil. I suppose it won't work well in the crankcase of an old Ford. But for knives and hand tools, it works just fine.
This same nonsense goes on with bicyclists. Mention WD40 as a chain lube on bike forum, and watch about half the heads explode, claiming a whole litany of reasons it will destroy your precious bike, usually starting with the trope, "...but it's designed to displace water!". The other half will say they've used it for years and never noticed anything bad as a result.
Sorry, but I have to disagree with this. WD-40 does indeed have some lubricative properties - no doubt. But to suggest that it is on a par with purpose designed oils just isn't right.
I don't think anyone's suggested that it will do any harm to multitools, but it clearly isn't as effective a lubricant as say, the gun oils, nano-oil and others that have been mentioned. In fact, WD-40 actually produce "3-IN-ONE" PTFE products that often sit on the same shelf in hardware stores, and it is this that is marketed as "Ideal for chains, cables and gear mechanisms". The WD-40 can says "Stops Squeaks, Drives Out Moisture, Cleans and Protects, Loosens Rusted Parts and Frees Sticky Mechanisms".
Don't get me wrong, I use WD40 a hell of a lot for releasing seized tools, cleaning and ensuring moisture has been dealt with on tools that I restore - it's great stuff. But one of the above oils will provide efficient lubrication for longer on a multitool, which is why I switched from using WD-40.
@Rhino1227 said:
Hey guys, thanks for all the great feedback. Seems like there is some divide over the effectiveness of WD40 as a lubricant. Well, I'll have to invest in some nano oil and mineral oil to compliment the WD40. By the way, my wife is now convinced I am a total loser for asking you guys about lubing my MTs.Ryan
Ah, what do they know ;)
-
Where to get food grade mineral oil?
thanks guys 
Look in a pharmacy; they're sold as laxatives, but it's all the same. :)
A pharmacy? Hmm! I think I'll take my tool along and show them exactly what wants lubricating,I don't want them to get the wrong idea
:DYa dont lube tools with that stuff , slippery but very latex unfriendly !
Chris
-
Where to get food grade mineral oil?
thanks guys 
Look in a pharmacy; they're sold as laxatives, but it's all the same. :)
A pharmacy? Hmm! I think I'll take my tool along and show them exactly what wants lubricating,I don't want them to get the wrong idea
:DMineral oil is also known as liquid paraffin or heavy paraffin oil (at least that's how it's marketed around here).
-
How about graphite powder? I used to use on a doorlock that did not run smooth and the difference was stunning! I'm out of it bit I would sure try it on a MT. Any experience with that? The best part about this, is that it is dry.
-
When I was asking around for mineral oil for my MTs, a local weaponsmith suggested a graphite-powder-based product. He couldn't vouch it was food-safe though... :-\
-
It is made out of carbon I guess. The building blocks of life, so you should be safe ;)
-
3 in 1 works wonders in moderation. It's kinda easy to over use it though.
-
I personally wouldn't ever consider lubricating anything with WD-40. It is designed to displace water, not lubricate.
Though commonly repeated, this is not completely true.
Yes, that statement is completely true. WD-40 was not designed as a lubricant. It was designed specifically to displace water and prevent corrosion. It does contain thin oil, but to lubricate is not it's primary use and should only be substituted for a proper lubricant as a last resort, IMO. There are much better products desgined and manufactured specifically to lubricate. Yes, there are many uses of WD-40 as claimed by the manufacturer, but it performs most of those "many uses" very poorly.
I was a bicycle mechanic for 10 years, and I told hundreds of customers to never apply WD-40 to their chains--for good reason. I saw the results of its use (grime and resulting wear) and there are much better products widely available. A chain lube should slough off dirt and grime, not gum up and attract it as WD-40 does.
Call it nonsense if you will, but when asked for my advice I will continue to suggest that people use proper lubricants where they are needed.
-
I personally wouldn't ever consider lubricating anything with WD-40. It is designed to displace water, not lubricate.
Though commonly repeated, this is not completely true.
Yes, that statement is completely true. WD-40 was not designed as a lubricant. It was designed specifically to displace water and prevent corrosion. It does contain thin oil, but to lubricate is not it's primary use and should only be substituted for a proper lubricant as a last resort, IMO. There are much better products desgined and manufactured specifically to lubricate. Yes, there are many uses of WD-40 as claimed by the manufacturer, but it performs most of those "many uses" very poorly.
I was a bicycle mechanic for 10 years, and I told hundreds of customers to never apply WD-40 to their chains--for good reason. I saw the results of its use (grime and resulting wear) and there are much better products widely available. A chain oil should slough off dirt and grime, not gum up and attract it as WD-40 does.
Call it nonsense if you will, but when asked for my advice I will continue to suggest that people use proper lubricants where they are needed.
Absolutely. Penetrating oils and the like are fantastic for, well, penetrating, and they excel at displacing water but they are too thin to properly lube metal on metal. I maintain that Nano oil or 3 in 1 are the best for any sak/mt. Oh yea, and WD40 gunks up like a mother. If you want to destroy(very slowly) your MT, keep using it.
-
@Artemis said:
Absolutely. Penetrating oils and the like are fantastic for, well, penetrating, and they excel at displacing water but they are too thin to properly lube metal on metal.In my experience, WD-40 isn't a good penetrating oil either. I'll take a specific penetrating oil such as PB Blaster or Kroil over WD any day.
-
@Artemis said:
Absolutely. Penetrating oils and the like are fantastic for, well, penetrating, and they excel at displacing water but they are too thin to properly lube metal on metal.
In my experience, WD-40 isn't a good penetrating oil either. I'll take a specific penetrating oil such as PB Blaster or Kroil over WD any day.
KROIL! good stuff. Yea, WD40 is much better as a cleaner and water displacer.
-
@Artemis said:
Absolutely. Penetrating oils and the like are fantastic for, well, penetrating, and they excel at displacing water but they are too thin to properly lube metal on metal.
In my experience, WD-40 isn't a good penetrating oil either. I'll take a specific penetrating oil such as PB Blaster or Kroil over WD any day.
KROIL! good stuff. Yea, WD40 is much better as a cleaner and water displacer.
I agree

-
It's just my personal preference guys but I would really recommend trying some G96 Gun Treatment. I've been using it almost 20 years now. It doesn't get gummy like WD-40 and it cleans and lubes. (www.g96.com)
-
I use WD-40 on my tackle box MT, but only because its always in my tackle box, WD cleans and lubes reels very nicely and it can do wonders as a fish attractant

-
WD-40, but not the aerosol. I buy the gallon size container. All oil, no propellent.
And I happen to LIKE my tools smelling that way!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login