Gearing up
-
Greetings, this is my first post.
I had a Leatherman Wave, which I lost. I tried the Leatherman Skeletool CX, which suffered the same fate--it accidentally dropped in the sand on an island in Maine and I couldn't find it. The good news is that I get to replace these and have the opportunity to buy a Swisstool!
I live in Maine and have a few lobster pots at sea. So I find myself in need of a good multitool that will cover my needs for rope cutting and general boat/marine use as well as general outdoor woods, camping and around the house usage. I was not familiar with Swisstools but after reading much about them, I am anxious to try one over another Leatherman. I'd say I was generally pleased with the Wave, but I don't feel that it was the kind of tool that I had to have again: there was some rust, the scissors would frequently get stuck, plus a few other niggles. I'm not so keen on the Skeletool--I just didn't find it very comfortable, particuliarly using the pliers.
I'm deliberating over the RS or the std Swisstool. I've read all the posts and understand that the RS serrated blade is probably better than that on the std, but you give up the file--which could be handy at times. On the other hand, I would use the scissors more often than a file, but I think when I finally need a file in the field and don't have one, I may be wishing I did. Dunno which way to go on this one...the RS has more useful tools for general use but the std has the file and is available in black.
As a compliment to this tool I also have coming a David Boye folding knife, straight edge with marlin spike.
http://boyeknives.com/folders.cfmI'm fortunate to have a little birthday money!
Regards,
-
welcome mate, all these tool have there good and bad points, its a case of finding what works for your needs, i had a swisstool and liked it but as a LM fan it was the first to go when needed, i would buy another though, for me its the wave through and through, but thats just me ;)

paul
-
I'd go with the standard mate, as it offers that bit more utility

-
Welcome to the forum Guido.
Just to throw a spanner in your though process, have you looked at the standard Swisstool Spirit (the smaller 4" tool)? You'd get your file, scissors and blunt tipped serrated blade (great for rope/line cutting) but it does lack a plain edge blade. -
Just to throw a spanner in your though process, have you looked at the standard Swisstool Spirit (the smaller 4" tool)? You'd get your file, scissors and blunt tipped serrated blade (great for rope/line cutting) but it does lack a plain edge blade.
I'm kind of drawn to the full size tool. I also like the idea of having two blades.
I'd go with the standard mate, as it offers that bit more utility
I suppose you could do a wider range of things with the std as it has the file, but the scissors on the RS would likely be used more than the file, methinks.
What about the difference in the serrated blades? Is the RS version much better? Is the std serrated blade a more versatile blade? What are the strengths and cons of each?
Thanks,
Paul -
Welcome to the forum Guido :D The std serrated and the Curved RS serrated both cut the same but due to the curve in the RS one it makes for a better rope cutter as as the curve stops the rope from slipping off the end .
Its a tough call about the file
Ask yourself when was the last time you used one on a multitool ? I find the file on the Swisstool to be good for metal but not so effective for wood and plastic .Its the other way round for the Spirits file .Dunc
-
I have to say i use the diamond file on the wave a lot, in fact used it the other night on a watch case,i also like both the saws on the wave, for me ive gone full circle on MT's and for me its the wave, followed very closely by the st300 paired with a vic classic,i think you have to look at what tools you use the most, for me its the drivers so combined with the bit kit i modded the wave has all i need, for heavy duty work the st300 as has longer reaching drivers, the saw is longer on the st300 to a point i found it flexy,but still very effective, as the wave has scissors that are ok but now as good as the original waves IMHO , the standard swisstool is a very nice tool, i had a slight issue with slippy drivers as are polished, but the whole concept itself works great, its the only MT ive had where i found myself fiddling with the tools , its a pretty heavy solid tool as well so should last for a long time,
paul
-
Thanks for the input.
Regarding the metal saw: how often have you used it?
Paul
-
I've used it quite a bit, but then I do a lot of maintenance around a school/gym/theatre/grounds :)
-
I use the metal saw quite a bit as an improvised jab saw . Never used the diamond file on my wave/Charges - which I carried for years .
Chris
-
metal saw not a lot, wood saw many times , diamond file a lot, in fact used it yesterday on a watch case,

-
While at work I use a file quite often, not so much at home, and I can't think ever in the great outdoors. I'm happy to carry a multi without a file while away from work, but it's a must for any multi I've got on me 9-5.
So it's going to depend on your circumstances more than anything else, I suppose a good rule of thumb is that if you can think of one specific reason to have it then it'll be worth going for, if all you can come up with is "it might be handy some day" then you'll probably get by without it.
-
Thanks again everyone for the input.
I've read in a few places that the SS finish creates a slip issue. One person said they actually used emory paper to create more friction on their Swisstool, another mentioned using some sort of tape. Of course, these could be some extreme circumstances. Is slip an issue for you? Would the black oxide ST not have this issue or atleast have it less than the stainless version?
Is the metal saw intended to be for metal notching or sawing?
Thanks again,
Paul -
Funnily I was just thinking about this today when using my Spirit. I was lifting a drain cover for a shower and my hands were understandably wet, I didn't feel any loss of grip or control myself so I personally don't think it's a real issue.
-
The spirit is a rock solid EDC, but the one problem I had with it is the Phillips driver. It slips a bit more than a LM Phillips. Other than that it rocks. As far as the Swisstools, the one I had weighed just a bit too much for me to belt carry. I prefer a tool that is 8oz or less for my belt. Anything larger is going to stay in the bag from now on.
-
The RS works for me. I'll take the serrated blade over the file.
Also, you mentioned cutting rope and a serrated blade is perfect for that.
and you can sharpen a serrated blade...but you can't ever resharpen a file. Think about it.
-
Thanks for the feedback. I'm going to get an RS--I think that serrated blade will come in very useful. It will be nice to have the scissors as well. I'm really looking forward to using it.
Thanks again!
Paul
-
So, I received the RS. This is a great piece of equipment! The Swisstool RS is extremely well built and has a very useful implement of tools. Although I've only had it for a week thus far, I've used the ruler a few times already--which is more than I expected--and now I wouldn't want to be without it (simple stuff like measuring the distance between two islands on a nautical chart, or finding the 110mm bolt amidst a pile of different size bolts...the Swisstool makes it simple). The saw cuts very well, as do the blades. The scissors are quite beefy as well. I look forward to putting all the tools to use. Yes, the tool is heavy, but in my view it is well worth it. I look forward to using this for many years.
Now, I'm eyeing the JRE leather sheath...does anyone have any experience with this?
-
Glad you are getting on with it Guido.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login