selection Help
-
@Kidder said:
3, Make the pliers with a fatter opening and tapered so that a nut from 1/8 to ½ inch will cause the handle to open approximately the same.Hmmmm. Couple examples come to mind. The first is the "flat nose" pliers that were on the original SOG PowerPlier. They had a bigger, tapered opening for grabbing nuts like you describe. (top picture)
Another thought would be slip-joint pliers, like the Schrade ST5 had. (bottom picture) The photo doesn't show it well, but the jaw pivot has two positions, one narrow and one wide, just like ordinary pliers often do.
.jpg)
-
For #5, did you look at the Squirt?
Also, I believe SOG makes a model with a similar head.
Well I looked, and the model is the PowerCut, coming out in October. The price from SOG is 100 dollars (American), but they will probably retail for 60-70 American.
-
@Kidder said:
5, I need a decent wire stripper, I don’t really need a scissor. When you go to Home Depot and look at wire strippers, what are they shaped like? Scissors. So fatten up the scissors, and put three or four holes in it so I can strip #20 to #12 ga. wire.I've been saying the same thing for quite a while now. I spent about 3 years doing electric work (residential), and I noticed that most guys (not just sparkys) don't have a pair of scissors anywhere in their tool box or belt, but most do have a wirestripper. I think the Leatherman needs to make a Surge model were the scissors are wirestrippers instead. They have just the right kind of beefy scissors for the job.
Welcome to the forum by the way! :)
-
I almost forgot about the Kilowatt!
http://sogknives.com/store/EL-01.html
Also, for #6, some Victorinox knives have electrician's blades, and pruning blades (which fit your discription better).Lastly, for #7, you shouldn't have any problem, because, as far as I know, no multitool company puts the cutting edge of the blade facing out.
-
Hi,
Wow, it seems like my wish list has been addressed at one time or another by different companies. Now, if they can put it all together. <gg>
What I meant by keeping the sharp stuff on one side (#7), is that on this new (and allot of fun) S62 there is and extremely pointed tool (awl?) right next to the screwdriver and they seem to come out together. And the awl is longer! There is no need for that. Keep pointy tools in one handle, and tools in the other.
Steve
-
@Kidder said:
What I meant by keeping the sharp stuff on one side (#7), is that on this new (and allot of fun) S62 there is and extremely pointed tool (awl?) right next to the screwdriver and they seem to come out together. And the awl is longer! There is no need for that. Keep pointy tools in one handle, and tools in the other.SOG's should be user-serviceable. Can you take it apart and switch the implements to where you want them?
-
Yep that's an awl. One of the best ones I've used also.
You should be able to switch some tools around to your liking.
-
Oh yeah, forgot about the awl. I have the tools I use most on one side (phillips, flathead, plain and serrated blades, and washers to minimise clumping.)
-
The thing with having them all on one side is the long tools need to be at the egdes to avoid interfering with the plier jaws when the tool is closed. So unless you only have 2 long tools in the selection you wouldn't be able to do this. (unless i'm mistaken of course!)
-
It is definately great to be able to "tweak" the tool to your liking isnt it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login