Soul Searching
-
I fall in love with knives and multis just like the rest of us, and tend to buy more then I can use, but I am a one tool type of guy, which makes no sense. However, I always look for "THE" tool for me, you kow? The one I can be identified with, or be synonomous with. I carry a tool for months and months, and then want another. I get it, and can't get used to it. I miss my old one. I carry this new tool for a while to WILL myself to give it a chance, but inevitably go back to the missed old tool...... only to find that now I've gotten used to the NEW tool and need to go back to IT!!! :ahhh
I guess the morale of the story is, you get used to what you carry. As long as it is of relatively equal quality, what you carry is what you become accustomed to. Give the SOG a chance. And, specially with a multi tool, DON'T baby it. Use it. Abuse it. Beat it up a little. It will only grow on you if you put it through it's paces. If it looks too pretty? Scuff it up a little by using it and it won't be pretty anymore. -
Don't worry about it mate, the new-ness will soon disappear (usually around the time of it's first big scratch ;D).
If you still haven't bonded with it after about a month then chances are you probably not going too, it is hard to forget the feeling that your some how cheating on your favorite tool :'(, sometimes it goes away sometimes not ::)
Let us know what the next month brings mate :)
-
Powerlocks are not pretty. It may be "functionally cute." However, it is not pretty. :)
-
Remove the 2 covers on the PowerLock's handles and you will be able to open the blades more easily. I used the covers for less than one day before removing them and I've not found the handles too uncomfortable while using the pliers.
-
Hi All,
Well, got my Gerber back from Oregon today. I had asked that if the broken needle nose tip (which is actually part of the handle, or 50% of the tool) couldn’t be fixed, then just send it back and I’ll cut it into a blunt nose and pay the postage.
The broken side isn’t broken anymore, so 50% was changed. Also, the other side of the needle nose that had some small craters in it from getting it too close to 110 volts and turning it into a welding tool is also gone.
The only thing left that would be mine are the tools themselves. I told them that the small screwdriver broke years ago. It is now fixed. As far as the other tools go, the knife usually had black electrical tape gunk on it from disconnecting motors in very hot places. This knife was used, but clean. Also the big screwdriver which I use a lot seemed to be allot more pitted then the one I sent them. Also, this Gerber seems to be “looser” then the one I was use to. With the Gerber closed, I can open the handle enough to open the pliers about ¼ inch. I don’t remember if mine did that.
Conclusion, they threw my Gerber in a pile and sent me somebody else’s junky one. On the other hand, I now have a working Gerber, it didn’t cost me anything, and they threw in a new sheath.
My dilemma now is, do I continue carrying my new SOG around, or put the Gerber (even though it’s really somebody else’s and feels like a new step child and will take some getting use to.) back in first position.
I will say this, The Gerber tools are MUCH easier and faster to pull out then the SOG.
Kidder
-
Good for you. It is standard in the industry to return a tool already refurbished, but it also quicker than waiting for the one you sent in to be fixed. good thing is it sounds like you are happy with the results.
-
@Defender said:
And, whatever you do, don't EVER, under any circumstances buy a SwissTool if you think the PowerLock is too pretty to use!LOL! :) That's <u>exactly</u> what I thought reading Steve's post! I do sympathize with you Steve since I just went thru the same thing with my new Swisstool Spirit. I got over it fast though as time is $. Good luck with both tools, Steve, and have fun. Remember, you can always get another. ;D
Splat
-
And, whatever you do, don't EVER, under any circumstances buy a SwissTool if you think the PowerLock is too pretty to use!
LOL! :) That's <u>exactly</u> what I thought reading Steve's post! I do sympathize with you Steve since I just went thru the same thing with my new Swisstool Spirit. I got over it fast though as time is $. Good luck with both tools, Steve, and have fun. Remember, you can always get another. ;D
Splat
The solution is to buy a good used SwissTool.The character marks are already there,so no fear of marring a work art.
-
Well, got my Gerber back from Oregon today. I had asked that if the broken needle nose tip (which is actually part of the handle, or 50% of the tool) couldn’t be fixed, then just send it back and I’ll cut it into a blunt nose and pay the postage.
The broken side isn’t broken anymore, so 50% was changed. Also, the other side of the needle nose that had some small craters in it from getting it too close to 110 volts and turning it into a welding tool is also gone.
The only thing left that would be mine are the tools themselves. I told them that the small screwdriver broke years ago. It is now fixed. As far as the other tools go, the knife usually had black electrical tape gunk on it from disconnecting motors in very hot places. This knife was used, but clean. Also the big screwdriver which I use a lot seemed to be allot more pitted then the one I sent them. Also, this Gerber seems to be “looser” then the one I was use to. With the Gerber closed, I can open the handle enough to open the pliers about ¼ inch. I don’t remember if mine did that.
Conclusion, they threw my Gerber in a pile and sent me somebody else’s junky one. On the other hand, I now have a working Gerber, it didn’t cost me anything, and they threw in a new sheath.
My dilemma now is, do I continue carrying my new SOG around, or put the Gerber (even though it’s really somebody else’s and feels like a new step child and will take some getting use to.) back in first position.
I will say this, The Gerber tools are MUCH easier and faster to pull out then the SOG.
Kidder
Sorry I missed this thread mate, I'm glad you got a tool back even if it wasn't the original one :)
Sound's like you still haven't bonded with the Sog yet :-\
-
@Kidder said:
Conclusion, they threw my Gerber in a pile and sent me somebody else’s junky one.
KidderIf you return a tool to Victorinox they very often replace it with a new one unless you request your old one back . Victorinox understand people get sentimentally attached to their products and on more then one occasion I have heared of people sending a tool that is too far gone to be repaired and it has been sent back to them plus a new one as well . You cant fault that can you ? I wouldnt be very happy if I recieved someone elses tool back
I remember sending a Leatherman charge back to the UK importers ( whitby knifes http://www.whitbyandco.co.uk/products.cfm?parentitemid=72 ) and got my one back fully repaired , they done a good job too . Credit due and all that .Dunc
-
No, I have not bonded with the SOG yet, it will take some time. Like the gentlemen that I am, I refuse to jump from one tool to another just because it's new. I'm just not that shallow.
On the other hand, those Vic Spirit's sure looks sweet, especially with a clip mounted to it.

Kidder
-
Ah the siren call of the Spirit, don't feel bad about weakening were swiss stuff is concerned, it's perfectly natural, honest ;D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login