Review: Style CS
-
I've been itching to give my opinions on a few LM tools, so I thought I'd start with the one I find myself using the most frequently: my little friend, the Style CS.
This is a sleek-looking tool, but I'll be honest: I wasn't all that impressed at first. This tool is the second to smallest tool in the "Skeletool" family (Style, Style CS, Freestyle, Skeletool, MUT) which is a family that I was never too impressed with. I handled the Skeletool when it first came out, played with it a bit and to me it just felt minimalistic and, frankly, gimmicky. So when I saw the Style CS, which looks (and is) roughly like a miniature skeletool, I was hesitant.
In fact, I wouldn't have even bought it except by mistake: My girlfriend wanted a Micra for Christmas to compliment her Wave, and unfortunately I couldn't find one at a retailer near me, so figuring that it was fairly similar, I picked it up with the intent to give it to her. When I later finally found a Micra, I got that for her instead and couldn't quite bring myself to return the as-of-yet unopened Style CS. I decided that since I'd already bought it and didn't particularly need that money back, I'd keep it for my own collection.
Boy, am I glad I did.
My impression after I opened the package and started to play with the tool? Pretty much the same as it was before then. The aesthetics of it were still off-putting. To me, a tool should be simple, elegant, right to the point. My entire hesitation surrounding the Skeletool family was based on the assumption that Leatherman had dedicated more to the family's form than to its function. However, this little gem grew on me as I got to know it better.
Right off the bat, I noticed one thing that has since caused me to dismantle and re-assemble the tool twice (and I might add, with great difficulty) to attempt to address the problem: the Style CS is a very stiff tool. The knife blade and the tweezers are the especially problematic culprits. I disassembled, cleaned, oiled and reassembled the knife-side scales, with no change in the stiffness. It's just a matter of its design. That said, I'd rather it be a bit difficult to pull out than to open itself on its own in my pocket or on by belt.
Compared side by side with its most direct relative (size-wise), the Micra, a few things are immediately apparent:
The Micra has more functions.
The Style CS is bigger overall (the Micra is 2 1/2 inches long closed, the Style CS a full 3, and about 1/16th of an inch thinner) but is also lighter.
The Style CS has outside-access tools.
That funky carabiner-style clip.Since the Micra is considered by many to be the best of the keychain-sized Leatherman tools, I'll compare the Style's features to the Micra's.
The Knife Blade
The Style CS' knife blade is the same length as the Micra's, a little wider, and the same thickness. It has a slightly different profile, but as far as cutting ability goes, it's about the same. However, I've found that it has three key differences, some of which work for it and some against.First of all, the knife blade is one of the places where the longer profile of the Style CS comes in handy. It simply provides a better grip. In addition, the knife is better-placed than on the Micra: the Micra's knife is on the scale that sits to the inside of the hand when held, which puts the other scale in the way of the blade's edge, making the bottom quarter- to half-inch difficult to utilize. This has been a (minor) design flaw in a lot of Leatherman tools: All of the tools that have inside-access knife blades, by the nature of the design, have this problem. It's less of a problem on the full-size tools because you have more blade, but on a tool whose blade weighs in at a mere inch and a half, sometimes that little bit counts. With the Stlye CS, you don't miss out on any blade, and can easily utilize the entire edge.
The first advantage goes hand in hand with the second: the blade can be accessed and used without opening the entire tool. For the sake of ease and quickness of use, this makes the Style's blade superior.
However, there is a very noticeable flaw that I think could have been avoided. The Style CS' thumbnail notch is placed very close to the base of the knife, whereas the notch on the Micra's blade is positioned roughly halfway up the blade. The difference that this makes is that it takes less effort to extract the Micra's knife blade. The Style CS has two holes in its blade that as far as I can tell exist only for aesthetic purposes, and I think that this dumbs down the usefulness of the tool a bit.
The ease of use of the knife (once you have it open, anyway) makes me prefer it over the Micra's though.
File
I don't use nail files, and for that matter seldom use files for any other purpose. That said, the file on the Micra is much more substantial and were I the type to need a nail file, I think that I would prefer it. The file also has the only feature that I really use my Micra for: the nail cleaner on the tip.1d Phillips Screwdriver
I actually rather like this tool. While I would never dream of using it for any heavy application, it's just the right size for the screws on my laptop, which I have had to remove repeatedly lately... However, the one on the Style is thinner, narrower and longer than the one on the Micra, and these three factors seem like they would lend themselves to a twisting problem.Scissors
The main (or at least, central) feature of both the Micra and the Style CS is the spring-action scissors that the tools are built around. While the profile and cutting power of the scissors themselves is virtually the same, there are two differences I've noticed which both swing my opinion in favor of the Style CS.First of all, this is the second place where that longer handle comes in handy. It's curved just slightly and cradles nicely in the hand. The Micra doesn't feel awkward in the hand or anything, but the Style CS does feel more like a regular pair of scissors.
Secondly (and YMMV) my Micra has less springback than my Style CS. This may not be universally true of the two tools, but it's made me prefer the scissors on the Style over the Micra.
Tweezers
The removable tweezers on the Style CS are bigger, better, and slantier than the fold-out tweezers on the Micra, but they are even harder to get out than the knife is. Expect to chip a nail every time you want to use these.Carabiner Clip
This of course can't be compared to the Micra, as the Micra lacks one altogether (in favor of a simple key ring). The clip is marketed as also being a bottle opener. It works in this regard but is kind-of clunky about it. The design of the clip is interesting, though. Rather than being solid, it's hollow: that is, it comes up from the scale, out and around to the front (where the spring sets) and then back around the same way on the other side of the tool, leaving a gap between the two sides. This gap, I've found, makes a decent small pry bar which is especially useful for lifting those pesky framing points when trying to open up a picture frame. It's not an intended use, but I've also used it as a scraper as well, and it works well with no damage to the tool.However, the carabiner clip's intended function is, for me, what makes the tool. It enables me to keep the tool clipped to a key ring on my front belt loop, where I can easily and quickly access the tool. It is much easier than reaching into my pocket, pulling my Micra out, removing it from my keys (I keep it in a small pouch attached to my key ring so that it can be taken out and is not actually attached to the key ring itself), putting the keys back into my pocket, and then starting to use the tool (and then repeating each step in reverse to put it away again). This feature alone has made it my most-used tool and one of my favorites.
So that's my long-winded review of the Style CS, and here's a quick recap of my opinions:
The Style CS has overall less features than the Micra, but the features it does have are presented better, easier to use and more accessible. However, some of the tools are lacking (file, screwdriver) and some are difficult to get open/out of the tool (knife/tweezers). The position of the knife (the scale opposite the palm of your hand when gripped) is a much-needed improvement over the positioning of the knife on most folding multitools (the scale closest to your palm). The scissors are great and on-par with the Micra, but the length and shape of the handle gives them a better feel in the hand. The carabiner clip is a great feature that makes the tool easily and quickly accessible in ways the Micra cannot compete with.I won't say that the Style CS is a better tool. It does indeed have less functionality than the Micra (or any of the Squirts, for that matter) but it makes up for it by being quick to work with.
Oh, and it looks great, too.
-
I'd like echo all thats been said and its not a tool OR it's big brother the cx that i woundn't like to be caught without.

-
nice review.
I do not own the style but I agree that the Carabiner Clip is what really sets it apart from the Micra/squirt.
-
I agree with everything you said, except I came down slightly in favour of the Micra. :D But then that's where the personal element comes in and you realise that there isn't "one tool the rule them all" and different people have different priorities. Cheers for the review.

-
i just got my style cs other day..
i was going to make a topic right now about it, than i saw this topic so ill add in..lol..
well my thoughts are, i wish it was bigger...
please dont get me wrong ..i was seriously in high high hopes for this tool..
myself i don't mind if its the exact size of the skeletool..
give us a big pair of regular scissors..so this is disappointing because i expected them to be a bit bigger...
they are like the size of a bic lighter..if that..there seriously small..umm so seriously small, i still have not got the knife out, because i cant..i just cant get it out, so i leave it in there..
btw anyone tried to cut 550 paracord with the scissors?
i did,
it cannot do it in one snip like a knife could..
just to give u an idea..
i had to cut it about 4 times for it to cut all the way through it..
this is not what i was expecting leatherman..
my tweezers are already wont go back in the slot properly..
the plastic is like warped..i don't know,
after now pinching my finger in between the joint where the scissors should not cut you..i feel like this is a junk tool, and they could have finished the design and made it better..
id shell out xtra 10$ if it was bigger, had a knife i could get out, not plastic, and did not pinch my hand till i bleed ...
my 2 cents, you could get 99 cent plastic handle scissors, that will cut better, that wont cut your hand..
http://www.amazon.com/Fiskars-94167097-Classic-5-Inch-Scissors/dp/B00005BZRZ/ref=lh_ni_t_
on sale 1.25c and they will cut better .
this is my comparison, i tested these myself..
the linked above scissors, will cut through paracord, no problem, you can wrench on them, they don't pinch / cut your hand..
sorry leatherman..give me a working big par o scissors please :)
-
I agree the knife's nail nick is way off, making it hard to open the knife.
But I don't really like the carabiner, I just feel it is too small.
post 2012 :ahhh :D
-
Thanks for the replies. :) I may do some more reviews, but I want to do them well. Any chance I could get a critique of the review itself, the points I hit right, points I missed and bits I maybe should have left out?
I want to be informational, but I know that I tend to get overly wordy.

-
This is not necessarily a guarantee of how to do it well but we do have some official guidelines for getting reviews posted on the Main Site here at Multitool.org. It can help provide a framework for you to follow to make sure you have everything covered.
Official Main Site Review Format
Many of you have wondered in the past how to get your review on the Main Site here at www.Multitool.org- it's always seemed a bit “hit and miss” with regards...
Multitool.Org Forum (multitool.ninja)
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




