Surge or Core???
-
I came in to a little cash and have been toying with the idea of adding a new tool to the old collection. I know some will say both, but really, I need to choose one or the other.
Uses: I'll use the tool from working in an electronics lab, to cutting branches in my yard, to working on power tools etc. etc.
So I have my sights on the Surge and the Core.
What do you folks think?
Thanks,
Bash
-
I know it's a bit bigger, and more expensive, but I'd go with the surge, as you'll never feel under-equiped with one, if your anything like me you'll get the core then wish you got the surge ::)
You could always pick up a core later :)
-
I could add a poll if you like?
-
Good choices both, and you'll never be short of an anchor with one of those!
It really all depends on how much you think you'll like the one handed and blade exchanging features of the Surge. Both are good tools, and I think honestly, I'd opt for the Surge, but then I've never been overly impressed with my Core, but that's possibly because it's maybe a little bit defective.
Def
-
I'm sort of stuck in the same debate myself. The difference is that I just want a tool for fun, so I'll probably go with the Surge since it seems like more fun :D The Core seems great for hard use though...
Another thing that's worth thinking about for working with electronics is which screwdriver settup will serve you better, the longer Core drivers or the much more versitile (especially if you get some more bits) Surge drivers. I might be in the minority, but I really like the tiny screwdriver that's on the Surge (and my Charge). I have found it quite useful, and have also missed it when carrying other tools.
Another option (just for the heck of it ;) ) would be to buy the Core and a Micra which would compliment each other quite well IMO.
Either way, enjoy the new tool :)
-
I think I'll end up with the Surge.
I'll keep you posted.
Thanks,
Bash
-
Gotta say that since I got both you are making the right decision. The surge is my fav tool that I own and dont worry about the reach of the drivers, because you can buy an extension or just make one for cheap.
I would only say however that you should get the leather sheath. the nylon one always rips the belt strap out on me. I have gone through 3 so far and really will be ordering the leather one soon. By the way there is a ton of blades that you can get for the replacement system that leatherman uses. :ahhh
-
They are both my two favorite tools. I myself prefer the SURGE because of the oho blades and the diamond file, but the CORE is'nt a bad choice either- it has real nice screwdrivers, long saw, easy to unlock blades etc. If you do go for the SURGE definitley go for the nylon sheath, my leather wore out quick.) Hope it helps mate!
-
While I don't own a Core, I can definately recommend buying a Surge. I've been carrying mine a lot lately instead of the Spirit (blasphemy!) and it's been extremely useful!
If you do go with the Surge, get the extra bits for it :)
-
@hawkchucker said:
Gotta say that since I got both you are making the right decision. The surge is my fav tool that I own and dont worry about the reach of the drivers, because you can buy an extension or just make one for cheap.I would only say however that you should get the leather sheath. the nylon one always rips the belt strap out on me. I have gone through 3 so far and really will be ordering the leather one soon. By the way there is a ton of blades that you can get for the replacement system that leatherman uses. :ahhh
i wish i read this be4 i got mine, it also riped
-
Theres a post over at blademorons where a guy has dropped his Core and it broke , dont know if that helps ? Here it is .... http://www.bladeforums.com/forums/showthread.php?t=497320
Dunc
-
@dunc5 said:
Theres a post over at blademorons where a guy has dropped his Core and it broke , dont know if that helps ? Here it is .... http://www.bladeforums.com/forums/showthread.php?t=497320Dunc
Do I detect a slightly sarcastic tone there mate :D
How high was it droped from (I've never bothered to sign back up for blade forums after my first flame war ::))
I'd imagine it must of been from a pretty great height ??? -
He said he dropped it on the pavement and it landed on the lock which flew off .
Dunc
-
@micky d said:
He said he dropped it on the pavement and it landed on the lock which flew off .
Dunc
That's pretty pathetic (if true ::)) you would expect it to be a little bit more robust than that!
I would certainly hope so , he did say it had had alot of hard use and hes even used it as a hammer so maybe it just fell badly and landed on the lock , even so I would loose a little faith in it after that .
Dunc
-
@micky d said:
He said he dropped it on the pavement and it landed on the lock which flew off .
Dunc
That's pretty pathetic (if true ::)) you would expect it to be a little bit more robust than that!
I would certainly hope so , he did say it had had alot of hard use and hes even used it as a hammer so maybe it just fell badly and landed on the lock , even so I would loose a little faith in it after that .
Dunc
Me too :o, why would you use a multi as a bloody hammer anyway ???, I can see if you were in a life of death situation, or if there was no other way round it, but it'd have to be a pretty extreme situation for me to use any of my tool's as a flaming hammer ::)
-
I'd use my beaters as a hammer if I could just figure out how :D
-
Many times I have had a multitool in my hand and thought about using it as a hammer :o but always managed to stop myself . Often used my swisstool to give a light tap though . Must just add that I would use it as a hammer if it was all I had and it was important .I remember a saying " when all you have is a hammer everything starts to look like a nail" .
Dunc
-
Seems like the opposite is true as well. ;)
(If all you have is a nail, everything starts to look like a hammer)
-
Core. I've never experienced the discussed problem with my first Core from last year, or this new one. The tools are solid and just plain work and the drivers are the longest out of any multi I've seen. It's a solid piece of gear. I wouldn't get the Surge because I don't like the tool selection and it's heavier. The only thing I like about the Surge is the outside opening blades, but I use the Core's drivers more than blades so it's a moot point for me. Actually, outside-opening is the main reason I just got a Vic Swisstool Spirit. I don't like having to open the Core to get at everything.
Splat
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login