Hand tools in the US.
-
I have started in a new job where I assemble and install shelves and drawers in cars that is used by craftsmen. The only problem is that the tools that belongs to the company gets misplaced all the time by some co-workers that would have misplaced their head if it wasn’t attached to their body and I spend a smurf load of time looking for the tools since they can’t remember where they placed it.
So I have talked to my boss and I can build my own tool cart/work bench that have drawers that I can lock up so I can use my own tools if I want to. So this is a very good excuse to buy some quality hand tools but looking at the prices here in Norway I am probably going to buy it from the US instead considering the big price difference.
I am looking at the Craftsman web page and I have found some tools that I need but I just wonder if there is any other company that makes tools of the same or better quality than Craftsman. Is there any good online hardware stores you guys know of or is it just the same to buy straight from the company?
Kenneth
-
Hmmmm, perhaps this belongs in the Gadget forum ???
-
-
In the US, the top brands are SnapOn and MAC. Tight tolerances, beautiful finish. Expensive but lifetime warranty against breakage. Most mechanics here have SnapOn or MAC for all critical tools (Torque wrench, close tolerance sockets, magnetic drivers, etc).
Craftsman and Husky are a step down, but fine for most home DIY'ers. Also lifetime warranty, and easier to replace. Less expensive, but not quite the same quality either.
-
@AHB said:
Don't you have Bahco Tools in Norway.? That's the best brand I ever used/seen/sold..
Hmmmm, perhaps this belongs in the Gadget forum ???
Let's move it then.. ;)
Sure we do, I have a Bacho bitt kitt right by my side and it’s great. But I am looking for reversible ratcheting wrench set and socket wrench set, and the price difference between Norway and the US on products like this is HUGE. I have found a Craftsman reversible ratcheting wrench set that I want for 90$ on their web page while a cheap no name brand goes for 150$ in Norway. So guess where I want to buy my tools from?
@Mr. Whippy said:
In the US, the top brands are SnapOn and MAC. Tight tolerances, beautiful finish. Expensive but lifetime warranty against breakage. Most mechanics here have SnapOn or MAC for all critical tools (Torque wrench, close tolerance sockets, magnetic drivers, etc).Craftsman and Husky are a step down, but fine for most home DIY'ers. Also lifetime warranty, and easier to replace. Less expensive, but not quite the same quality either.
Thank's!
Will check it out! -
You could take a look at Kamasa tools.. I got their medium ratchet set and it's a very good quality too.. :)
http://www.kamasatools.com/sv/ -
I have used Kamasa before and they do make good tools, but the price difference is still big compared to the US and Norway.
-
-
I have used Kamasa before and they do make good tools, but the price difference is still big compared to the US and Norway.
I'll shut up then.. ;) :D
No, please don’t . I like your input since you are knowledgeable in the tools department, but it’s just that you can’t compare the price between the US and Norway.
-
For pliers and such , I'm a big fan of Kline tools . Knipex from Germany is also very good .
Chris
-
I don't know if you can get Halfords professional range over there? I think they are around the same level as craftsman (which I have used and like)

http://www.halfords.com/webapp/wcs/stores/servlet/SearchCmd?catalogId=10151&storeId=10001&categoryId=-1&langId=-1&action=listrefine&constraints=ese%7C%7Ci%3A1%3B258%3B%3Bprofessional%3B%3Aprofessional%3B1%2C1%3B%2B0%7C%7Csea%7C%7Cprofessional%7C%7Ctax%7C%7C1%7C%7CCar+Care+%26+Maintenance
(they do some cheap rubbish there aswell)Sorry AHB even though I have some Kamasa I don't think they are in the same league as others mentioned on here >:D
I agree with the others re, snap on, Bahco,Kline, and Knipex

-
@sparky415 said:
Sorry AHB even though I have some Kamasa I don't think they are in the same league as others mentioned on here >:DI mentioned them as being a very good quality too, but I don't recall
comparing them to any of the other brands..
-
Sorry Mate

I feel guilty now :-[
-
I use klein, snap-on, knipex, and some craftsman hand tools at work.
Buying a quality tool maybe higher initially but pays off when you still have it in prime condition 30 years later. I recently became a fan of knipex after buying a pair of dikes from them.
-
@sparky415 said:
Sorry Mate
I feel guilty now :-[Well you certainly should Mister..

All's fine mate.. :D
-
I don't know how you like to work Kenneth
But can I suggest you have some kind of storage/system to keep your tools in so you can see whats missing with just <u>one</u> look, easier than going all through your tools at the end of the day to see whats missing
Another one for the good toolmakers list is Teng for sockets etc (only by reputation I've never played with any)
-
@Pacu said:
I use klein, snap-on, knipex, and some craftsman hand tools at work.Buying a quality tool maybe higher initially but pays off when you still have it in prime condition 30 years later. I recently became a fan of knipex after buying a pair of dikes from them.
Yes, exactly what I mean also. But is the quality in a wrench set from Snap On and Mac worth the 150 or 200 $ more than a wrench set from Craftsman? Craftsman does have a lifetime warranty so if it breaks you will get a new one.
@sparky415 said:
I don't know how you like to work Kenneth
But can I suggest you have some kind of storage/system to keep your tools in so you can see whats missing with just <u>one</u> look, easier than going all through your tools at the end of the day to see whats missing
Another one for the good toolmakers list is Teng for sockets etc (only by reputation I've never played with any)
like having order in my tools and I am very careful to put the tools back after I am done with them and I am going to custom build my own cart at work so as I can have, quoting the German guy at work now, ordnung und kontroll. I really feel amputated at work, have to walk all over the place to find the tools I need and sometimes we don’t have the exact tool for a curtain process so I will have to do it as best as I can with something that roughly will fit.
-
For hand cutting tools, Knipex and Klein. For the day to day use, Craftsman and Proto and Elora are good tools for the price. For high torque applications I own Snap-On and Mac, both live up to the high price tag for that use. I use a six panel tool bag that now weighs 87.7 pounds. To reduce weight I have been using a Metrinch socket set that fits both metric and standard. For moderate duty applications I have been cautiously impressed by this "as seen on TV" set. But, the Metrinch ratchets are ka-ka. I've replaced the ratchets with fine tooth Facom ratchets.
Power tools I like are Metabo, Makita and Dewalt. Measuring equipment I prefer Fluke and Hioki.
-
I've busted a knuckle or two on wrecked half inch Craftsman ratchets. When i took them back to Sears for replacement i got alot of negative attitude from the tool clerks. (2 different occasions at 2 different Sears).
My snap-on ratchets still going...for me the extra price is worth it. I mix and match though..some stuff is better than others in tools. Klein screwdrivers beat all, Knipex cutters are better than craftsman, craftman sockets are the best value, Husky and Kobalt have nice handtools too.
-
@Pacu said:
I've busted a knuckle or two on wrecked half inch Craftsman ratchets. When i took them back to Sears for replacement i got alot of negative attitude from the tool clerks. (2 different occasions at 2 different Sears).My snap-on ratchets still going...for me the extra price is worth it. I mix and match though..some stuff is better than others in tools. Klein screwdrivers beat all, Knipex cutters are better than craftsman, craftman sockets are the best value, Husky and Kobalt have nice handtools too.
For a time period, I had the EXACT same experience at Sears. I stopped buying Craftsman tools for a while. Sears contacted me at one point after I sent a nasty email to them about their "Lifetime" warranty.
I let them have it. I told them that I was buying Husky and Ridgid brand tools for non-critical purposes. I was done with craftsman.
Then, a year and a half ago, I was in Sears replacing broken screwdrivers, I brought a broken socket handle with me, expecting a big hassle.
They didn't have the socket handle in stock,so they replaced it with the smallest socket set with the same handle. Clearly they heard the same from a LOT of former Craftsman owners.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login