Rust prevention
-
As I'm a user, and conditions are rough i.e. fine dust, glas and mineral wool, a lot of rusted stuff arround...
2-3 times per month I use old tooth brush, hot water and cleaner for stainless steel kitchenware (dishes, cookware etc.), after cleaning them in every corner and rinse, I leave them to dry, and then WD-40, soak them and leave for a while in open area, after that I use clean cloth to remove stains and smudges from water and WD.... And... That's it!!

-
I don't do much in the way of preventative measures. I use Bioshield T-9 to lubricate the pivots. That product offers corrosion protection, but I only use it about 3 times per year. Rust doesn't seem to be a problem on my LM Juice. Apparently the 420HC stainless does a pretty good job of resisting rust on its own.
Some bicyclists use paraffin on their chains for lubrication and protection. Has anyone tried that on a MT?
-
I oil tools with mineral oil as needed.
If they get wet then I give them a mineral spirits bath. The spirits will displace the water. Soak tool, take out, let dry, and oil.
More often than not I use little isopropyl alcohol prep pads for spot cleaning the blades. If the tool gets dirty, then I spot clean with mineral spirits and a brush (I've also used breakfree CLP). If the tool get*** really*** dirty then I soak them in mineral spirits and scrub them with a brush.
-
I usually wipe my MT's down with a silicone gun cleaning cloth. Usually do that once a month on my users. If I'm out in the rain or on salt water, I may use either a light oil such as 3in1 or BreakFree. I follow that with exercising all the tools. I then wipe as dry as I can with a clean, dry cloth followed by a wipe down with the silicone cloth.
Best - Joe
-
@edcgear said:
As I'm a user, and conditions are rough i.e. fine dust, glas and mineral wool, a lot of rusted stuff arround...2-3 times per month I use old tooth brush, hot water and cleaner for stainless steel kitchenware (dishes, cookware etc.), after cleaning them in every corner and rinse, I leave them to dry, and then WD-40, soak them and leave for a while in open area, after that I use clean cloth to remove stains and smudges from water and WD.... And... That's it!!

I do basically the same thing, except less frequently.
I scrub and clean the tool with hot soapy water, rinse in tap water and thoroughly dry it.
After that I spray a lot of oil into it, work it into the pivots and wipe off some excess.
I prefer my tools to be slightly oily because they tend to rust easily here. -
@MeadMaker said:
Some bicyclists use paraffin on their chains for lubrication and protection. Has anyone tried that on a MT?I use a cyclist product called White Lightning which is wax based and does a excellent job of keeping rust off of bead blasted surfaces, such as Lm SideClip, Crunch, etc.
The Crunch has a lot of tiny hidden areas in which to rust. I prefer a coating such as wax or mineral oil that isn't toxic when it could possibly be absorbed via open pores in summer heat.
A thin layer of wax seals the" pourous" texture of a LM Sideclip. In my local environment sweat, humidity and soaked clothes rule the summer day. Thank goodness for the new clothing fabrics. And I enjoy the looong growing season for my peppers and veggies. -
Great to hear the different preps and services people give.
To add my own - 5 of 7 days Im fairly office based, so my tools only get a treatment when they get abused/covered in grit etc.
I generally wash in warm soapy water, scrubbing with a toothbrush. Rinse in hot tap water.
Following an air dry I lube with 3in1 oil and occasionally give them a bit of a polish with car wax. -
Clean with brake cleaner

and oil with
Inox
http://www.inox-mx3.com/inox.htm

or
CRC
http://www.crcind.com.au/catalogue.nsf/web_brands/CRC+5-56?openDocument
or
-
In an ideal world, tools should be wiped clean of all the residue as soon as the job is done. Unfortunately, this is difficult for those who use tools heavily, or carry in pockets where they come in contact with sweat. Here is what I do to all my knives, and MTs':
(a) every day, take them out of pocket, and store them in open condition (a large drawer is okay, as long as it is not fully stuffed with things).
(b) once a month, give them a warm water soap bath, using a toothbrush to clean the joints and remove all residue, oil, etc. They are now "squeaking clean".
(c) hang them on a clothsline to dry.
(d) add a drop of mineral oil on the joints (best achieved by using a pin - dispenses the right tiny amount). wipe remaining oil with a clean cloth, and you are good to go.Haven't experienced rust even once on my knives, or multitools.
-
The most researched oil in the world is . . . . engine oil. Also the best value is ? ? . . . engine oil. We filled some cups with spray oils , WD40 , Q20 , Trisol ( a South African gun cleaning oil ) and good old engine oil. The next day we were looking for who stole all the oil ! - C'ept the engine oil, seems he didn't like that as he left it behind. - The rest largely evaporated as the percentage of volitile esters ? i( I'm sticking my neck out now ) evaporate. Great for penetrating dry joints , and cleaning, but minimal risidual benefit. When you coat your MT with oil, it penetrates all the nooks and crannies and is there long after you wipe it dry /clean with a dry cloth. In the joints , it minimizes wear and repels water. Now for a penetrating water displacing spray oil, check out Strike Hold. ( but I slill use oil ( usually old ) on all my tools : )
-
I swear by the Sentry Solutions products, especially the Tuff Cloth. Products to clean , lube and protect...http://www.sentrysolutions.com/
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
