Need ideas for...
-
... my next project: the Knifeless Spirit! :) My goal is to make a UK-friendly Spirit, and probably add some missing functions in the process.
So far I got down to removing the old pins on both sides and replaced them with some stock nut-n-bolts. The pivot part of the bolts got covered in teflon to allow for smooth operation, but this is a totally temporary solution in my head. I've sourced some 4mm pins from Neil to peen this thing down when I'm all happy with it, albeit I reckon some pivot screws might be better (and make this thing even more configurable in the future). Initially I was thinking of removing just the knife blade; some searching in the forums also got me to removing the saw as well (being locking and all).
I've added a slightly cut-down Vic scaler-disgorger and lanyard ring spacer on one side, but I don't quite like the f/f. I'll probably try to find some slim metalic ruler to put in there in place of the disgorger, as that's the function I wanted to add in the first place.
Anyway, here's where your input comes in. :) Any ideas as to what to throw in there?
-
When I first started reading this I thought, add missing functions ... what missing functions

To be honest if I removed the knife, I'd want to replace it with ... well, a knife quite frankly

If you wish to get over the locking blade issue, would it be possible to "ramp" the notch on the offending tools so the lock spring offers resistance to closure, but doesn't stop closure (much like the feel when closing and opening again)? -
Thanks for the feedback 50ft-trad. I don't live in the UK and the knife laws here are lax (and I'm innocent-looking) enough to let me go around with a standard Spirit on my person. Yet, I'd like to come up with a knifeless MT so as to be 100% on the law abiding side. That is, I'm not looking into making the Spirit a slippie but to completely remove its blades, so that I can have it on me at all times (even in pubs etc.) without breaking some law. The UK and DK laws are among the strictest I know of, so if the end result is legal there it should be about anywhere else... :D Mind you, I've tried a knifeless Fuse before, but imho it was too large for its functionality. The Spirit is about as large as I'd get.
-
I have often toyed with the idea of making a knife-less MT by replacing the blade with a narrow spork. I don't have a Spirit, but I would think that by removing both the knife and saw, it would give room for a deeper "dish" to the spork.
Which I think would come in handy in a pub, especially if a generous friend orders something quite tasty :D
-
Geia soy Niko :)
I wouldn't disassemble the Spirit at all.
I'd just grind the blade and make a nice locking and useful marlin spike.
Then I'd call the new MT the "Sea Spirit" :DIf I like the disgorger I'd grab my file and grind the blade to make a disgorger and call the MT the "Fisherman's Spirit" ::)
-
I wouldn't disassemble the Spirit at all.
Yeah, I would just grind off the edge and make a true "peanut butter" knife/pharmaceutical spatula.
Where is the fun in that??

Exactly! Well, that, and the fact that I'd like to still be able to put it back together if I'm not happy in the end... :-[ :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login