Titanium SAK progress...
-
I decided to start a new thread because everybody likes mod progress pictures. :tool:
This is an aluminum block with an angle cut on one end that matches the angle of the screwdriver/corkscrew slot in the back scale. In a regular SAK the screwdriver rests on the outside liner so I needed to make sure this area was just right. I wrap emery paper around this block to clean this back notch up a little at a time until the driver lays flat.

Open with everything brought to the proper dimensions...

...and closed.

All together now. Actually there are many more parts to go. This one will be a Delux Tinker with an inlaid yellow shield that I will dub "The Submariner" when it's finished.

-
except the first one the pictures aint working for me

-
Sorry for the pic problem. I shuffled some photoshop stuff around and broke the links. Can I get a mod to delete the first two posts please?
*Done.

- Bob*
-
Wow, this is going to be an awesome knife! 8)
-
Wicked!
Looking forward to seeing the rest!
-
Assembled with spacers for finish sanding. The wickedness is starting to show. 8)

-
WOW That thing is awesome. You don't need a knife, just whack them in head with that thing. LOL
-
are those the spacers David at GLWaterjet cut?
-
@Metropolicity said:
are those the spacers David at GLWaterjet cut?No, I cut these with my jewelers saw. It moves pretty fast in this thin material. My plan was to sell the first several knives I finished to fund a large run of waterjet spacers to save time but I'm afraid that the quote Dave gave me was unrealistic given what others charge and then he went MIA. Has he gotten back to you yet?
-
Looking pretty awesome so far!! :o
-
Bushido,
No he hasn't. All I have left to do is cut the hammer itself.
Great work so far!
-
very cool, 8)

-
I did something similar. Not sure it fits here or in it's own thread... It isn't perfect, but I like it. The only way to your perfect SAK is to make your own.
The Titanium is stunning tho!!


-
Beautiful! How about a little background? Is that polished aluminum? Stainless? Iridium?
-
Lovely stuff guys.

-
@bushidomosquito said:
Beautiful! How about a little background? Is that polished aluminum? Stainless? Iridium?I used 3mm Stainless steel plate and shaped it with bench grinder and filed smooth. Used 180 grit paper and worked down to 1000 grit before buffing. I had to use 2.5mm pins all round since I don't have 2.25mm drill for the centre pins. This meant drilling out the relevant spacers, hook and a few springs. Broke the drill bit 3 times.... I think. Well worth the effort tho. The scales holes are slightly countersunk to allow for the pins riveting to hold all together. The only unfortunate thing is that the outer aluminium spacers had to be inserted in order to accommodate the difference in thickness of main blade and corkscrew. Otherwise main blade is loose and the knife scales wont be parallel. Sorry there isn't progress pics but I plan to do another one as soon as I work out what I want.
-
-
With the scales and liners polished up I turn my attention to enlarging and honing the tool pivot holes to .127" and then mirror polishing them with some green buffing compound on half a cotton swab in a Dremel tool. Even though the pins are a harder titanium alloy I don't want to give them a surface to gall onto.It is tedious to open up all these holes with a diamond reamer but I'm stuck on using 1/8" pins. Now I have to make a bunch of .005" phosphor bronze washers to keep the tools from riding directly on the liners.

-
Nice thread this 8)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login