Titanium SAK progress...
-
@tattoosteve99 said:
Shield huh. You could laser etch one.It's so shiny the laser will reflect and etch a shield in the laser etcher itself!
-
@Rebelgium said:
It's so shiny the laser will reflect and etch a shield in the laser etcher itself!
-
i say carry it daily. Scratches and patina will add character. ;)
-
Well done

You may never dare touch it again but it looks cool :D
-
I just don't get how you locked the scales into the SAK?
I can see the lil tubes but don't really see how you "pined" it ? ??? Maybe a dumb question, and BTW :ahhh
looking SAK! -
@WWW said:
I just don't get how you locked the scales into the SAK?
I can see the lil tubes but don't really see how you "pined" it ? ??? Maybe a dumb question, and BTW :ahhh
looking SAK!Thank you. The :ahhh smiley really captures how I felt when the polish was done. I was like, "This is smurfin awesome! I can't smurfin believe I made this! Smurf!"
Now I've calmed down a bit.
The pins are flared on the ends and the holes in the scales are countersunk. I made 2 sets of tapered mandrels with different point angles so I could flare the tube ends out, then down, and they got sanded flush when I did the polishing. Since titanium is so eager to work harden they are locked in there good. The back tool pins are also peened into countersunk holes and sanded flush. It's a ridiculously complicated way to put a SAK together but it works and looks good.
-
I just don't get how you locked the scales into the SAK?
I can see the lil tubes but don't really see how you "pined" it ? ??? Maybe a dumb question, and BTW :ahhh
looking SAK!Thank you. The :ahhh smiley really captures how I felt when the polish was done. I was like, "This is smurfin awesome! I can't smurfin believe I made this! Smurf!" Now I've calmed down a bit.
The pins are flared on the ends and the holes in the scales are countersunk. I made 2 sets of tapered mandrels with different point angles so I could flare the tube ends out, then down, and they got sanded flush when I did the polishing. Since titanium is so eager to work harden they are locked in there good. The back tool pins are also peened into countersunk holes and sanded flush. It's a ridiculously complicated way to put a SAK together but it works and looks good.
:D
That is an awesome job there BM

-
Carry it. What's the use of an SAK if it's not used. Setting there all lonely. Tools are meant to be used not saved or worshipped. Pull out your shelf queens and get them dirty. You'll feel better.
-
@tattoosteve99 said:
Carry it. What's the use of an SAK if it's not used. Setting there all lonely. Tools are meant to be used not saved or worshipped. Pull out your shelf queens and get them dirty. You'll feel better.Noooooo! :ahhh
I have to keep this one nice. I made with the intention of selling it to fund the cutting of many more titanium SAK parts on a waterjet. I just have to finish the bail and shield and figure out a reasonable price for it.
-
Wow!! like I said in the Swiss Forum, this was a really amazing project with some beautiful work. 
@bushidomosquito said:
..... I just have to finish the bail and shield and figure out a reasonable price for it.Man a Bail will just put this SAK really over the top.... the buyer got a good deal I think.
Can't wait to see the next project. ;) :D

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login