PST
-
Your Marquette Sideclip appears to have the Wider cutters, but in your Wave/Wave head pic - it is hard to tell, but maybe the lower one has the thinner cutters?

Well, we know the thin cutters appear on PST and Sideclip heads - we need to confirm its existance on Pulse/OldWaves.
I'd say it is a newer design, as so far it has only appeared on the "New Style" heads, (Second Generation? Between the old angular ones, and the new-new ellipse ones) with tools from '04.
Hawks PST (with the Wider Cutters) is a LEATHERMAN TOOL one, not a LEATHERMAN USA one - so that's not the deciding factor.
-
Ah!
The lower Wave does have the thinner cutters.
It's a 04 model.
My 01 Pulse has the arrow similar to the Wave but is has the wider edge.
-
So why change them all right before discontinuing?
and for The Big Question -
Is it better or worse?
Mine are, for lack of a better word "Munted" - The sure as heck can't cut paper (Just tried then - had to get to 5 layers before it cut rather than folded it), and when they are closed I can still see light though the Hard Wire notch.
They make a mess of stranded copper wire.However- I've been using them to hack up steel welding rod. I'm a little disappointed that such an act would damage the tool, but not all that offended, as I've had it do worse to cheapie Diagonal Cutters.
-
@Nomad said:
So why change them all right before discontinuing?The thinner style is the same as on the current tools. My Blast, Wave and Kick all have that style.
I assume this was part of their continual updating.
L-R: 2004 Wave, Kick, Blast, 2000 PST.

I think it is as good or better, they all seem to cut Zip-ties, paper and wire the same as I can tell. Might be a durability matter or an ease of production thing.
-
Huh, I didn't think to check my New Wave.
Still doesn't really explain Why though.
We rather understand SwissTool heads by now, and the reasoning behind each change.
I hope someone thought it was technically better- Price Cut changes bother me (as they do many people, who are more interested in effective quality rather than what it costs)
-
Well, my PST can no longer cut .8mm "hard wire", which is a little bit annoying.
-
Time to send it in Nomad for an adjustment.
-
Bugger that mate, it's still good (for a while longer...)
Anyway, then I'll have to explain "uhh, just fix the plier head thanks, the broken/ground screwdrivers were my fault"
'sides, what if it easier for them to replace it?
I may have only had this for a few months, but it's my tool, and I paid $150, I would be offended for it to be thrown out and merely replaced.(Though at $150, it seems that there are probably one or two replacements "built in" to the initial cost ::) )
-
If you send it to LM it will be free and they will probably replace it!
-
@Leatherman123 said:
If you send it to LM it will be free and they will probably replace it!But that's what Nomad didn't want to happen.
Come to think of it, Nomad, you aren't going soft on us by getting all attached are you? :P
-
Come to think of it, Nomad, you aren't going soft on us by getting all attached are you?
Nope. I'll happily send it in when it is beyond use, I just want my money's worth of destruction >:D
-
Well, it's been six months.
Not exactly an era, but certainly long enough for me to be well aware of the many foibles of this very dated tool design.
Where to from here?
There's no tool out there that addresses ALL the faults to produce some sort of Ultra-Tool.
Spirit gives you more functions.
Wave gives you one handed.
Swisstool & Core gives you bulk & strength.
How do you choose?!
-
Love the PST but there is a lot it can't do :(
I have been asking myself the same thing, I guess just buy as many as you can afford
:D and I'll do the same :DBy the way have red the whole post (back when I joined) one of the posts which actually caused me to join

how is your ole PST doing have you broke it in 2 yet? >:D -
Nomads Home!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
Time for a photo extravaganzer.
I apologise for darkness, I artificially lit the area, then the camera tuned it out...
anyway,
After 11 months of service, abuse, being intentionally rusted, and recently being retired to my car glovebox and replaced by a LM Kick, here is what my very first Leatherman PST looks like.

The semi-disassembled PST

Pivot Rust - perhaps too dark to see.At this point I wish I was at work and could resize using my super-computer, instead of an online resizer that takes some time.



Crap at hingey end.
Phillips Tip Rust
Assorted Grime.
rust inside handles.
Rust on plier pivotColorful Enunciation this is boring, I must have started this post 15 minutes ago!

Amateur blade sharpening.
snapped & reshaped slot head
slightly mangled wire cutter.For those interested, I took out the bolts using the pliers of two other LMs. So golf to your fancy socket-systems and flat wrenchs.
As an aside, can someone tell me the order of tools & washers for each handle?
I wiped it down with a cotton cloth and reassembled - With the exception of the some of the plier-head & phillips tip (non polished areas), all the seeming "rust" was actually just filth that wiped away.
I lost a washer...
Even without knives, can openers and whatnot, the PST makes a real neat looking pocket-pliers. I'd be reasonably happy if it just had a selection of drivers in each handle, and left the knife/can opener/awlery to a Vic SAK.
-
11 months not to shabby for the little ole PST
Good test for the original MT
I'd say that it probably has done very well by the pics minus a little damage and not much rust (but who hasn't damaged or broken a tool if used much :ahhh ) Especially if used hard ;) As I said before great test of the PST Nomad :D -
Good test for the original MT
Not really the original - it's one of the latest PST's before they were discontinued.
-
It's the original model of MT nonetheless ;) Even with a newer plier head :D
-
PST found its way into my pocket again today...
It might not be comfortable, the cutters might not quite work any more, the tools might clump and not necessarily be of the best design, but I can't help it - it's so smooth and neat, no wasted space, butterflies open with a flick. Everyone should have one.
If only they were as cost-effective as SAKs...
-
I misplaced one of my Kicks somewhere, so my PST is back in the pocket every day.
Even as it is, it out performs half of the "Real" tools I'm supplied with for work (It can't be said that they broke the budget on my tool kit - my PST cuts (with some grunting) up to six strands of steel wire, whereas the supplied wire cutters I'm supposed to use (and have been told off for not using) struggle with two or more.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login