Extra bits
-
What I really need is this: http://www.knifecenter.com/kc_new/store_detail.html?s=ON9429
But it's a little large for EDC ::)
-
@theonew said:
What I really need is this: http://www.knifecenter.com/kc_new/store_detail.html?s=ON9429But it's a little large for EDC ::)
That's a nice looking bit of kit!
I think carrying extras that are specific to your needs is a great idea... one man's EDC is another man's OCD ;)
-
Some excellent additions to your kit.
-
You never know when it will come in handy, so if it doesn't bother you to carry it then by all means carry it.
That goes for anything that anyone decides to carry. I know guys that EDC a garbage bag. Some carry zip ties in their pockets, others an everpresent hanky. I always always always carry a pliers based multi. I don't need pliers every day, but I run into situations often enough where I do need them and it doesn't bother me a bit to have the tool on my belt so I carry it. (right now it's a Blast)
To each his own and props to you for being prepared!
-
Nice add-ons, I carry the #2 Robertson And the Phillips/slotted bit from my other surge in my skeletool. Are Robertson screws really uncommon in the states? I'm going to safely estimate over 75% of Canadian wood screws are robertson. I prefer them as well they don't seem to strip their heads as much as Phillips IMHO,
-
@Beerplumber said:
Nice add-ons, I carry the #2 Robertson And the Phillips/slotted bit from my other surge in my skeletool. Are Robertson screws really uncommon in the states? I'm going to safely estimate over 75% of Canadian wood screws are robertson. I prefer them as well they don't seem to strip their heads as much as Phillips IMHO,Sadly yes, they are all phillips. I hadn't even seen robertson bits much until recently. The appeal to phillips is that if you don't have the right size but you are close, it could work in a pinch. Problem is, the screw manufacturers can't seem to agree on a sizing table for the screws, so you never really have the right size. Most are SUPPOSEDLY #2, but I have seen my fair share of seemingly shrunken #2's.
-
@Mercury said:
You never know when it will come in handy, so if it doesn't bother you to carry it then by all means carry it.That goes for anything that anyone decides to carry. I know guys that EDC a garbage bag. Some carry zip ties in their pockets, others an everpresent hanky. I always always always carry a pliers based multi. I don't need pliers every day, but I run into situations often enough where I do need them and it doesn't bother me a bit to have the tool on my belt so I carry it. (right now it's a Blast)
To each his own and props to you for being prepared!
To being prepared!

-
Nice set up mate, i carry stuff i need for my bike, ive added some allen bits since taking this pic


-
My EDC bag is heaving with "extra bits":
Lantern attachment for my EDC PD20
Headlamp (at least one)
3 way ratchet screwdriver with hex bits
Swisstool CS Plus (with more hex bits)
Sharpening stone
Vaseline
Camera
Engineering tables (Zeus)
Scientific calculator
Sealskinz gloves
Sealskinz liner gloves
Electrical panel key
Sewing kit
First aid kit (Basic)
Spare lighters
Spare rizlas
Spare filters
electrical fuses
bulldog clips
paperclips
exotac firestarter
compass
BUFF
FRED
Permanant marker
pencil
pens
toothbrush
toothpaste
WD40
USB pen drive
Painkillers
Antihistamines
Insect bite spray
Chewing gum
Niquitin lozenges
Keys
Tissues... my 10m (33') Stanley Fat Max tape isn't there ... hmmm ...

I sometimes have backups in my pocket too, but today the "gadget ring" is at home today so I'm travelling light with just a CS4, PD20 and Byrd Wings Slipit. Otherwise (if I'd brought it) I'd also have a preon revo, inka pen, micra, silver gripper tweezers, utilikey and mini petrol lighter on me.
Oh ... then there's the 58mm SAK on my car keys and 65mm SAK on my house keys ... I think that's about .... oh no hang on ..... mini note pad in wallet (came out of a christmas cracker) and AG Russell Ultimate Penknife ...
That's about it today! ... I think! (probably missed something though)
-
nice list
-
Not sure i would fit all of that in my little pouch Al :D
cool list, my man bag has lots of things in it infact ive forgotten most of it, there is some paracord and a torch and a compass i remember that much :D
-
I try to have Robertson bits available in the hopes that they will attract more Robertson headed screws to me, for the simple fact that I would like to see more Robertson screws in America.
-
@gafftapegreenia said:
I try to have Robertson bits available in the hopes that they will attract more Robertson headed screws to meI so wish it worked that way, then I could leave my torx bits at home and make those fasteners go away.
But wait wouldn't that mean if I left my multi-tool at home, all the tasks it completes would disappear as well

-
@gafftapegreenia said:
I try to have Robertson bits available in the hopes that they will attract more Robertson headed screws to me, for the simple fact that I would like to see more Robertson screws in America.. I don't understand how you guys do without robbies, I rarely strip the heads and you can put one on your bit or driver and it will stay there, letting you hold something in one hand and pin it with the other. Might have to start a "fasteners thread" don't wanna highjack
-
By all means, hijack away. In my experience with online forums, thread hijacks are often more interesting than the original topic :) On the other hand a discussion of the pros and cons of fastener types really deserves its own thread.
While I'm sure I've encountered robbies on more than these two occasions, the most memorable was just a week or so ago when I needed to tighten the screws which hold the intercom in my apartment to the wall. The only robbie bit I had was in my LM bit kit :-[ The other time was several years ago when I helped a friend build a deck on his house. He had bought a big box of robbies and as I recall they did work very well with power tools, rarely ever getting close to being stripped. Maybe the lack of robbie screws is holding America back

-
I am led to believe the uncommonness of robbies in the U.S. was a political thing like Henry Ford invented Phillips or something but do not quote me on this that info is straight from el grapevine. I'm going to wiki this. I think slotted screws would be better with"sides" so the bit is always centered but the theory of using a #2 for bit for other sized screw head
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login