Half-price Octane
-
Earlier today I was at the local Dick's Sporting Goods. I wandered up to the gun and knife section, and was just browsing. I was playing with an Octane, which was tagged in the display case at $44.99. At that price, I wasn't about to buy it. However, the guy at the counter told me that it had been reduced, but he wasn't sure of the price. When he checked it, it came up as 22.99! For that, I was willing to take it home with me. He also took off an additional 10% because it was the last one and a display model! So after tax for less than $25 I took home a new Octane. For a display model, it's nice and tight, seems like it was hardly touched. Build quality was a pleasant surprise, this is the second Gerber that I've owned, and both of them are nicely put together. My only real gripe is the liner lock is very thin on the blade, but even then it doesn't seem as bad as I'd been led to believe. Is it a heavy use tool? Definitely not. But for kicking around the house and such it looks like it will do just fine. Time will tell.

-
The Octane is a design I really like. You got a nice deal on a great tool.
-
Good find! My current multi-tool EDC is an Octane, and despite the fact there's a fairly low opinion of it, I find it's a good choice for EDC. Overall, it's not a great tool, but it's compact, light, and pretty useful. I also have a Suspension, and one of the old original Gerber multi's, as well as a Crucial, but the Octane is the one I regularly carry.
It is definitely NOT a heavy use tool, but in situations where I need something tougher and/or more capable, I have my 'handyman' toolbox under the bottom shelf in our pantry, where I keep the stuff I use most commonly to do small fix-it jobs around the house.
I agree the liner lock is definitely on the thin side, and I've been bitten by crappy Gerber liner locks in the past (literally), so I am cautious with how I use the knife it has. I am also not a fan of CE blades, but the ratio of plain and serrated edges on the Octane is a good one; there's enough plain edge to be genuinely useful, and the serrated edge is just enough for doing things like cutting twine, plastic bailing, and small boxes. Although I'm also not a fan of hollow-ground blades, I like the blade shape, and appreciate the lightness the hollow grind gives the blade. For times when I need a more capable blade, I usually have my Tenacious handy, so the light duty blade isn't an issue for me.
I also like the fact it's got a real philips driver on it, and the fine point standard driver has been useful for me as a probe/pry-bar/scraper more than as a driver actually. That and the standard full size flat head driver is plenty for my needs. (That's what I don't get about Leathermans... what's with all the flat-head drivers? Three or four sometimes on one tool? Please.)
I really only have two gripes about my Octane. 1) the pliers tend to release themselves in my pocket, so sometimes it gets tangled up with things in my pocket, or the fabric of my pants/shorts pocket itself, and 2) the clamshell opener is pretty much worthless; it works, but it should have had a sharper angle as I find it can slip out of the cutting groove it makes if you aren't careful about it, and it needs more edge and a shallower grind angle to the edge as well, as it often binds up and won't cut on things like cardboard if you try to use it as a box cutter.
Other than that, it's my favorite small/light tool. I have a gray one, but would have loved to have gotten a red one, but couldn't find one at the time. Good find! :D
-
I carried it today at work, and it did come in handy a couple of times for little things. The Phillips on it is great, worked perfectly for what I need to do. I noticed the pliers opening at times in my pocket. Not a deal-breaker, really not even noticeable in the pocket of my work shorts, but still....I wonder if I can cut a notch in one of the handles for the plunger to lock into...
Would be a good excuse to get myself a Dremel :D. Overall, the Octane did all that I asked it to do today with no problems, and that's enough for me to keep it in the rotation. For what I paid for it and what it is, it really is a useful little thing to have on hand. -
I'd have jumped on one at that price as well, good find.
it's definitely a MT I want to get my hands on at some point.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login