Floatie
-
PST has a smurf lanyard ring, just putting it out there.
I dabble in a marine environment (or rather, I'm the kind of bloke who likes to jump into the water, boots and all, it makes me feel soldierly)
When involving myself in this happy passtime, I fret at the potential loss of beloved possessions. I keep my wallet in a zipped pocket, but what of my Multi?
I have never actually lost a multi in water, despite wielding several without lanyards or similar, but the risk is there. - what do folk to do prevent such a terrible thing?
the Lanyard ring hole on the PST bothers me somewhat - other than being too damn small for me to fit any key-ring I have found to date through it, it is at the wrong end of the handle, having a lanyard hanging off the Plier-end of the tools strikes me as inconvenient (no more I suppose than having it on the Other-tools end - Though having thus far not managed to attach it to anything, I can't say empirically as to its effect either way)
I've also discovered that the hideous Cork floats (http://www.whitworths.com.au/main_itemdetail.asp?item=48116&search123=loat&intAbsolutePage=1) do nothing to even slow a PST from sinking to the murky depths.
That's not saying much though, they have trouble supporting more than two keys in the water.
-
I'm one of those anoying people, who put's lanyards on everything ::), and if I was playing near water, I'd definatly make sure it was all tied down or zipped away :)
As for the lanyard hole thing, have you tried the keyring of a Vic Classic, there just about the tiniest functional key ring I know :)
-
@Nomad said:
the Lanyard ring hole on the PST bothers me somewhat - other than being too damn small for me to fit any key-ring I have found to date through it, it is at the wrong end of the handle, having a lanyard hanging off the Plier-end of the tools strikes me as inconvenient (no more I suppose than having it on the Other-tools end - Though having thus far not managed to attach it to anything, I can't say empirically as to its effect either way)I think the main reason that the lanyard ring is on the plier end is to stop the tool unfolding due to gravity, if it was at the tool end the tool could rotate round. Another good thing is that it doesnt get in the way of the tools when they are in use, nothing worse than trying to undo a screw with the lanyard wrapping round and round the driver!
As for the floating device i'm sure Dunc will be able to provide some input on it.
-
What about one of these? http://www.water-buoy.com/
-
@yellowhammer said:
What about one of these? http://www.water-buoy.com/While i think its a clever idea i would never buy one. 1) its a one use tool, and i like to test things to make sure they work first, but with this once its gone off you have to bin it. 2) that gets expensive if you keep dropping stuff! 3) if you fall into the water with that then surely it will go off even though you still have it in your pocket? your then with out a flotation device until you buy a new one even if you're only 1hr into your 3 week trip.
Just my thoughts on it! Don't let it put anyone off buying one!
Roadie
-
Dunc is the person to ask. ;)
-
Perfect solution for the floatie problem...
Go to any marine supply place. They have floats to put on the key ring for boat key floats and attach it to the ring on the knife. Just make sure it is enough to float what you have. It could be a bit bulky but if you are engaged in wet activities and don't want to lose it this would do the trick. Other than that if you don't want the bulk of a float make sure it is attached to your body by a lanyard or cord.
I just did a google on "key ring float" and found a bunch. Just make sure the one you find has enough flotation for your knife or muti-tool. If you can't find one that will do the trick use a couple. This is a common item.
-
Go to any marine supply place.
::)
I know a good one....I think it's called "Nomad's Pirate Supplies" or something.....
There are two basic kinds of Key Ring float - the hard plastic kind, and the foam kind.
The hard (usually Yellow) plastic kind, in either the bulb shape with nipple, or dented cylinder kind are both awful to carry, if you sit or lean on them they are excessively uncomfortable, and they have a tendency to crack, significantly reducing their floatie-ness.
The soft foam ones with a flexible plastic coating, available in a variety of fun shapes, are better as far as carry goes, but they are quite large, unstylish, and still likely not buoyant enough to hold a Mid-to-Large multi.
Other than that if you don't want the bulk of a float make sure it is attached to your body by a lanyard or cord.
That brings us to the problem of length - a Short lanyard makes the tool hard to use in those awkward places/angles, and a long one becomes a liability if you drop the tool (or even if you don't), and it wraps around or tangles in something.
A Lanyard of any kind also makes lending to tool to a buddy a bit of a challenge.
There are those spring loaded retracting Lanyards people use for keys, pens, and Dried-Fruit Scoops in grocery stores - but there is nothing even remotely masculine about those things.
In the time it took me to write all that, I've come up with the idea of a bracelet with small metal ring, and having a Snap-Hook on the multi, so that while in use I can easily clip it to my wrist, making loss less of an issue, and if the lanyard is to my wrist, the multi can reach anywhere my hand does.
-
I dont know if I'm going to be much help :( You see I dont actually use lanyards very much :o I know I know ::) I should but they get on my nerves . I have one attached to the inside of my coat pocket and clip knives and tools to that when I need to . Out on the water I dont use one , I hate having all that para cord dangling about .One guy I know has a one handed opening sailing knife and wraps a long lanyard around the handle and blade . So if he needs it in a hurry he has to unwrap the lanyard before he can open the blade ::) ( I really need to spend a bit of time with him on this ) . The boats Swisstool has a short lanyard which is attached to the tool by a fishing clip ( which I made ) and slips over your wrist incase you drop it . I keep meaning to put one on my edc but it doesnt sit in the sheath right or it hangs out the sheath .
Those buoy floats are good but do you really want one of then dangling off your multitool ? Just gets in the way when trying to use it .I would say ( as its your tool and not mine ) go for a long lanyard but make sure its attached to you clothing .Dunc
-

Maybe use one of these on the PST lanyard ring, then attach the lanyard to it?
-
What about a pistol lanyard like this one?
http://www.kitbag.com.au/prod1015.htm
It's curly, and I don't know if you could call it girlie.Stormdrane, one of the members here, also made a damn good looking one:
/topic/83 (Pic is in a post about halfway down the page).EDIT: The manual for the PST:
http://www.multitool.org/wiki/tiki-browse_image.php?imageId=562
says that you need to use a no. 5 stainless steel split ring, available where fishing supplies are sold. (I think I knew these as swivels) -
Eighty American dollars? :o
-
That's Australian. There are cheaper ones on that site, but it wouldn't surprise me if you'd pay about $40US for that in the states - even with the currencies almost being equal these days. Not sure how much USD a Charge TTi costs in the states, but here the standard retail price seems to be about $299AUD
-
That's Australian. There are cheaper ones on that site, but it wouldn't surprise me if you'd pay about $40US for that in the states - even with the currencies almost being equal these days. Not sure how much USD a Charge TTi costs in the states, but here the standard retail price seems to be about $299AUD
RRP is around AU$400
Lucky for you suckers market competition prevents anyone from charging RRP for any LM tools.
EDIT: The manual for the PST:
http://www.multitool.org/wiki/tiki-browse_image.php?imageId=562
says that you need to use a no. 5 stainless steel split ring, available where fishing supplies are sold. (I think I knew these as swivels)I did read that, and promptly ignored it, having no notion of what a "No. 5 stainless steel split ring" might look like.
I'll go tackle the tackle box and see if something I have might fit. The hard part seems to be getting the ring through the loop on the Lanyard hole and past the body, maybe if I bend it out a little so there's more space. -
@Nomad said:
RRP is around $400.Lucky for you suckers market competition prevents anyone from charging RRP for any LM tools.
Wow. There are 2 stores around here that sell them, when I went to get a quote on one, they both said there was no RRP. I can see now why they said that :). One store wanted me $360 for it, the other wanted $289. A lot of the online stores that sell them in aus seem to offer them at about $299. That's why I suggested that as the retail price.
-
Looks like I was incorrect about split rings.
-
As recommended I used the ring off a Classic (the ring off a larger Vic was too large)
However this has brought be to notice another thing.
I carry my PST Plier-head-down, the case has a leather fold inside which sometimes stops the tool from fitting nicely - the reduced end around the Pliers seems to limit this a bit - having the Lanyard coming from that end seems a little odd, and depending on what sort of rope I end up using, might making fitting into the case even trickier.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login