MultiTool storage solution
-
Bob,
The blueprint cabinet was offered to me before the Portland trip and when I went back they were all gone. There was about 10 of the cabinets all together. My accountant friend has a client that closed their engineering offices because of the home building slowdown. They designed whole tracts of home and had the huge blueprint cabinets. I almost thought about taking one or two and just leave them on the trailer until I found space for it in the garage.
There are several of them available on ebay and craigslist for really good prices. These are kinda nice:
http://www.ebay.com/itm/MACHINIST-CABINET-PRINTERS-CABINET-TOOL-BOX-/160661257041?pt=Tool_Boxes_Storage&hash=item2568283b51I wish there were some of these for free but I am thinking of looking at these this week since they are close:
http://www.ebay.com/itm/280749955575?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649There seems to be a lot of these available lately...both the poor economy and people not making blueprints anymore.
Bruce
-
I never thought about that either. Looks like those would be the ideal storage solution for SAKs and MTs.

-
I am really liking this one:
http://orangecounty.craigslist.org/art/2583201115.html
I am planning on looking at it this afternoon. The guy said the drawers are about 2 1/2" deep and the unit is very sturdy. Being that it is made of wood it will look very nice. Too bad I can't seem to find one the next size smaller I think these are designed for D size drawings (Bob keep me honest here) and a C size would be 1/2 as big which would be perfect.
I will post a report after I look at it this afternoon....I wonder if I should drive the Volvo or the pickup truck?
-
I always thought these were neat.
-
That birch one looks to be quite the bargain.
Wouldn't the ikea jobs be too deep really?
-
I do like that wooden one Bruce. Hope you got it!

-
The guy never called me this afternoon to go look at it. I left him a message this evening so hopefully I can go get it tomorrow.
I have not figured out where to put it yet...but that is the least of my problems.
-
Bob & Neil,
Thanks for the nice words about the "Birch" on from Craigslist. I just got home from looking at it and unfortunately the only solid wood on the cabinet was the fronts of the drawers. The sides, top and bottom and back are all veneer covered particle board. The bottoms of the drawers are hard board and very flimsy. It looked nice but it was not going to work for multi tools.
Bruce
-
Bummer. :-\ Well, I guess that's why its a good idea to always check these things out. :-\
-
And have a backup plan:
-
Want me to pick it up for you? I can get it to at least Fort Wayne, IN.
More info from the seller:
The cabinet is approx. 43 1/4" high, 21 1/2" deep, 35" wide.
There are 24 removable drawers. Each are approx. 30 1/2" wide, 15" deep and 1 1/4" high.
The outside is metal but the draws are wood with metal fronts, handles and slide hardware. It is super heavy.
I don't know about the weight. 150lbs?
It says: Hamilton, Two Rivers Wisconsin USA, 1C15-C99290
I am waffling about the 1.250 deep drawers and 24 of them! I don't have that many tools! But I also wonder if a drawer or 2 could be taken out to easily make double or triple depth drawers. If you or anyone else is interested let me know.....Maybe it should go to Wapakoneta?
Bruce
-
@Bruce909 said:
Want me to pick it up for you? I can get it to at least Fort Wayne, IN.More info from the seller:
The cabinet is approx. 43 1/4" high, 21 1/2" deep, 35" wide.
There are 24 removable drawers. Each are approx. 30 1/2" wide, 15" deep and 1 1/4" high.
The outside is metal but the draws are wood with metal fronts, handles and slide hardware. It is super heavy.
I don't know about the weight. 150lbs?
It says: Hamilton, Two Rivers Wisconsin USA, 1C15-C99290
I am waffling about the 1.250 deep drawers and 24 of them! I don't have that many tools! But I also wonder if a drawer or 2 could be taken out to easily make double or triple depth drawers. If you or anyone else is interested let me know.....Maybe it should go to Wapakoneta?
Bruce
Yet ;)
Wouldn't be much good for boxed tools but would be great for bare tools.
-
The backup plan fell apart on Saturday, I went to look at the cabinet but no go. It turns out that it is a typesetters cabinet that was used in the old days. The drawers are made of cheap pressboard and the cabinet was dirty, rusty, beatup....I could keep going. It sure looked a lot better in the poorly lit picture than in person, the guy admitted the picture was a few years old too.
Time for "PLAN C" I have a couple of file cabinets from a bank vault that housed signature cards and I am using them for lawn sprinkler supplies and PVC Pipe fittings. I am going to try to find a similar cabinet or see if I can clean one of them up to put back in the garage. They are both outside now under cover but exposed on all 4 sides so it might be a bunch of work to get all the sand out of the drawer slides. But maybe I should go to .....
The drawers should be about 23" wide x 27" deep and 5" tall. The one shown in the auction seems like it is very expensive to me so I will start shopping around to find one.
-
What an apothecary chest or a dewy-decimal cabinet?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login