Design a SAK
-
Thanks for the detailed instructions! Surely a tap wouldn't break before you ripped the threads out of the softer ALOX, would it?
I've broken enough Taps not to ask questions now.
I've got some fairly ssmurfy HSS taps, but I need clips before I start making holes.
You're right Terry, the threads would strip if it was just the alox. When you tap these knives, you end up VERY close to the backsprings. On the OHT's (yours included) to get the clip as high as possible you end up in the bend of one of the backsprings and when you thread the tap in, its easy to get so close that the tap starts to bind against the backspring. Once it starts wedging itself in there, it flexes and can break really easily. My personal OHT is clipless, but has the holes for a clip except one of them has a piece of tap in it! Now that I think about it, that's pretty much how I get all my keepers. Something goes a little wrong and bam!! Into the EDC drawer it goes!
-
Well I got to say that I would love to have that done to my farmer, but I would must definatly trash the whole kit and kabotal. I would love to add a third layer to my farmer, adding a second blade, and having a clip on it.
Maybe it is time to spend some dough.
-
@hawkchucker said:
Maybe it is time to spend some dough.You know who to contact... I think you might be pleasantly surprised by the price of those mods.
-
The 2 bladed Farmer works out pretty well.
I did one a couple weeks ago.


-
I'm in love

-
Will work for multis!

-
Could you put black ALOX scales on a Fireman?
-
Nope. I don't make alox scales. You can try swissbianco for those.
-
I would love to get my hand on this knife:
The Victorinox Blade (same as VSAKCS newsletter name)

It is something I did with PaintShopPro. I am not sure if it even possible to make because of the electronic blade maybe won't get access only after open the small blade.
(I don't think they ever made one of those but I am not sure)Is it possible to get such a custom made alox handle knife ? and if so how ?
-
I like it mate, looks like a swiss congressman with a saw :)
-
That would be a nice one. I don't know if the 2 specialty blades will nest in the same layer or not since they are made to fit the same position. Theoretically it should fly.
You might even be able to get at everything since the saw would be in the middle leavin a little space to access the nicks. If not the layers could be switched which might allow for better positioning. You need an electrician plus, a pioneer settler and a rancher to find out!
-
You need an electrician plus, a pioneer settler and a rancher to find out!
... and a Scibeer. :P :D
That is going to be very expansive :ahhh
I made the pictures using:
Electrician plus - 43$
Pioneer settler - 27$
Pioneer rancher - 37.5$
(took the pictures and prices from www.swissarmy.com)So it will be 107.5$ + work :ahhh :ahhh :ahhh I guess I have to wait, can't efford it now.
-
There are to things you have to remember when adding up the costs...
-
Felinevet offers these knives well below MSRP, and he supplies Scibeer directly.
-
Scibeer has many spare parts in stock already, so buying a "fresh" knife for disassembly may not be necessary.
I would suggest contacting Bill (Scibeer) and asking him what would all be involved in getting one done. I think you'll be pleasantly surprised.
Def
-
-
Is there any reason more tools can't have the double-flat of the Cap Lifter/Screwdriver? (and combo tool)
Not so much because I imagine many of the tools would benefit from being used at 90º, but because it gives them somewhere to stop before hitting my fingers!
Is there any reason you can't have backspring tools on Alox models? (HOOK!)
-
The Electrician's blade and the harvester blade should go together OK, they are in a layer together in the XLT.
-
@Sea Monster said:
Is there any reason more tools can't have the double-flat of the Cap Lifter/Screwdriver? (and combo tool)Not so much because I imagine many of the tools would benefit from being used at 90º, but because it gives them somewhere to stop before hitting my fingers!
Is there any reason you can't have backspring tools on Alox models? (HOOK!)
+1

What...? 2008...? What's the punishment for resurrecting a 10 year old thread from the grave?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



