Sharpening 154cm
-
Either is fine depends on if you want sharper or more durable edge. But now it's too late anyway, since you have established a 40° edge, you will have to remove a lot of metal on 30° to reach the apex of edge, and chances are the factory edge is greater than 30° anyway.
-
@jzmtl said:
Either is fine depends on if you want sharper or more durable edge. But now it's too late anyway, since you have established a 40° edge, you will have to remove a lot of metal on 30° to reach the apex of edge, and chances are the factory edge is greater than 30° anyway.All Leathermans come out of factory with 32° edge and they recommend Spyderco Tri-Angle to sharpen them (I assume they talking about 30° setting on Sharpmaker). Myself I polished the factory edge on my Leathermans with Ultra Fine stones for Spyderco Triangle and used that as back bevel to 40° edge (also polished with UF stones). All my Leathermans shave and push cut paper like it was air ;)
-
30 degrees

-
30 is nice but I prefer 40 because I'm different I guess.
-
I always put some black marker on the edge of my Leathermans and then try them on the 40 degree setting to see if the stones are acting on the very edge. You'll find some Leathermans have a sub 40 degree main bevels and work fine, while others are well over 40 degrees and sometimes have uneven bevels and then you have to get out the Edge pro and take the bevels down to under 40 degrees. A sub 40 degree main bevel, say around 32-35 degrees, and a secondary edge bevel of 40 degrees from the Sharpmaker is what I always go with. That works with either 420HC or 154CM ect. Leatherman may claim 32 degrees as standard, but I think you'll find most are not that acute, or at least not on both sides of the blade.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login