Caring for a LM
-
Sometimes these tools are tight, even right out of the factory. With any tool, oil and a lot of break in are needed. If that doesn't owrk, soak it in WD40 for a day, then put it in the dishwasher and then oil it. These methods WILL work.
-
@genevabuck said:
Sometimes these tools are tight, even right out of the factory. With any tool, oil and a lot of break in are needed. If that doesn't owrk, soak it in WD40 for a day, then put it in the dishwasher and then oil it. These methods WILL work.Be carefull with the dishwasher as the salts in it may make the blade/pliers rust and dull the tools finish. I have put SAKs in the dishwasher but no LM tools, yet.
If you do use the dishwasher use low temperature, short program, very little powder, rinse quickly, dry and oil.
-
I don't own a dishwasher but what I do is I take a bowl of hot water, some soap and move the tools (open and close them just not all the way so I don't have to fiddle with extracting them every time) under water while trying to get the soap between them. The water should be as hot as you can stand - the metal expands in the hot water just enough to allow soap to get between the tools and pivots. You should feel the tools getting easier to open after few moments. After few minutes of that I replace the water and repeat the procedure to get all the soap out. After that I take the tool out, shake the water off and leave it to dry out (worm tool will dry pretty quickly). Then I lubricate it with Victorinox Multi-tool oil.
If I get really stubborn tool I just disassemble it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login