Multitasker Review
-
A year ago I purchased a multitasker and carried it for two weeks. I thought I was impressed then but now I know that was nothing! I EDC'd it several times since and now I have been carrying the series 2X. The series 2 tool is smaller in closed length than the competition but when opened it is the same size as the big boys. Multitasker has done a good job fitting the longest tools and pliers into the shorter handles. This is a comparison of it along side the freehand, swisstool, core, surge, charge, and wave. It is slightly larger than the wave closed but o boy, wait till we look at the size of the pliers.

I first used the Phillips driver. The reach is very good. It has the longest reach of any multitool Phillips I have used (the core is close). Using standard bits it has a very good fit on screws. I compared the bits it came with to the bits that came with my Gerber Freehand kit and even the bits included with the tool are high quality. They are ground much better than the freehand bits. As I mentioned the reach is great and it is now one of my favorite screwdrivers on a multi (the leatherman bit kit and adapter on a core is also a favorite). The implements snap into place better than most tools, perhaps any tool I have used and although there is no lock the screwdriver never once wobbled or tried to close. Here is a picture of the spine of the implements. You can see how well they are machined.



I work in an office and used the knife blade to open packages. It is sharp and cuts well. Opening packages was easier with the shorter blade. It opens one handed but requires two hands to close. I have mixed feelings, the shorter blad is a pro and a con.

The file has a nice flat driver on the end with plenty of reach.

I added a dental pick to my tool (I removed it from an older series 2 tool) and placed a phillips in the handle.


The plier head is the smoothest, most well built plier I have seen on a multitool. The teeth fit together perfectly and boy are they aggresive! This is the series 2X next to a wave. The Pliers are longer, wider, and thicker than the wave. They dwarf it!

Here is a series two next to a wave, core and freehand. Although the handles are shorter, the pliers are longer than those of the core and freehand.

In the office we use a desktop stapler; however the staples are large and can staple 100 pages. I often have to remove the staples and I use a multitool to grab the staple and then twist the tool in my hand so that the staple wraps around the needle nose and comes out of the paper. Twisting is a bad motion on a multitool; however, this is pretty light work. It causes the tips of the needle nose on my Leatherman to flex just slightly. The Multitasker has no flex. I decided to test it against some thicker wire. The Multitasker had no flex, the wave just a slight amount and the core flexed a little more.

Some may consider the lack of a nut area on the plier as a con, and it is but it doesn't affect it much. The teeth are so agressive that they grab onto nuts very well. In many cases they work much better than the tools with that section. Here is a pic of me turning a nut with the plier tips, the wave slipped more when doing the same task.

I bent two types of wire during testing and you can see in this pic the coating has been removed from the wire by the agressive teeth.

Almost last, but not least I cut some wire. :D and boy did I abuse it. Why cut just one strand or three strands. Why not cut three strands of hard wire at the same time! I started by cutting one strand, then two, then three. That has got to be one of the toughest multitools on the market!

The series 2X tool has bronze spacers, G10 handles, a 440C knife blade, tool steel pliers, and is mostly constructed of machined parts. You may say it is setting a new standard, however, I really don't beleive that. While most companies are working to drive costs down, Multitasker tools focuses on quality and inovation. The level of quality achieved by Multitasker Tools, in both the individual parts of the tool and the tool as a whole, is well above any standard the rest of the industry can achieve.
Thanks for reading and being patient with my first mini review.
Pros
Implements snap into place well
Long driver
Plier pivot and strengthCons
Shorter blade
Pliers do not open wide -
I see I and missing some pictures of the wire I bent. I will look for those later.
-
Excellent review scrappy.

-
Thanks Chako
-
Yes indeed, a very good write-up Terry!
You ought to do these more often. :DI share your sentiments on the 2X. The previous model Multitasker was great, and the 2X is a significant improvement, especially in the plier jaws as you point out. I have not done any wire cutting tests with mine yet, sounds like your testing went well. :)
-
@J-sews said:
Yes indeed, a very good write-up Terry!
You ought to do these more often. :DI share your sentiments on the 2X. The previous model Multitasker was great, and the 2X is a significant improvement, especially in the plier jaws as you point out. I have not done any wire cutting tests with mine yet, sounds like your testing went well. :)
Yes, I am very happy with the pliers. That was the one thing I wanted to see improved on the original series 2 but there have been other improvements also. The series twwo uses bronze washers but the 2X uses an even more expensive type of bronze. Talking with Shane about it think the upgrade was to Aluminum Bronze 954 and Phosphor Bronze was used before.
Will a mod please change my post, replace the word brass with bronze?
Thanks fo the kind words Bob.
-
Fixed.

I'm thinking about doing a gripping test/comparison amongst a few different multitools when I get back home. It will be interesting to see how the new Multitasker teeth profile compares to the more traditional plier style found on its competitors. :)
-
Cool review and a great MT

BUT , i think think thread showed be removed to the reviews section

Allan is bieng slow this days , i wonder what make him that busy
-
As I've said before, if they produce a non military version of this tool, I would probably go for it over the spirit.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login