Crazy
-
@Tomcat_81 said:
Thank you, jazzbass! That explains a lot - I've seen a couple of knives with this defect and always wondered
if it was due to some desinfectant, oil or something alike.When I first saw this poor fisherman I thought about buying it, just to try out how it will clean up.
What do you think, folks?
Should I get it and post pictures of the restoring process?Tomcat
I would like to see someone do that. Personally I don't have the tools and skills for this. However from the description above I seriously doubt there will be anything left to restore, only the implements and their springs might be worth saving. You would have to build a completely new knife from these!
-
So now, you can officially call me "crazy" ;-)
Bought the wreckage, but as some may know, I have a soft spot for wrecked knives:
</topic/65385
Let's see how it cleans up.
Curiosity killed the cat ;-)Tomcat
-
@Tomcat_81 said:
So now, you can officially call me "crazy" ;-)Bought the wreckage, but as some may know, I have a soft spot for wrecked knives:
</topic/65385
Let's see how it cleans up.
Curiosity killed the cat ;-)Tomcat
Good luck! The scales will probably have to be replaced completely. One of the ones I had cleaned up really well, but within a month or so everything was corroded again - esp the inlay and the bail. Looks like the front scale on this is cracking through, which means it will start disintegrating. Whatever is coming off the scales tends to eat away at the outside liners too, so they may need to be replaced.
-
@jazzbass said:
Good luck! The scales will probably have to be replaced completely. One of the ones I had cleaned up really well, but within a month or so everything was corroded again - esp the inlay and the bail. Looks like the front scale on this is cracking through, which means it will start disintegrating. Whatever is coming off the scales tends to eat away at the outside liners too, so they may need to be replaced.Thank you for your thoughts!
I'm expecting the inlay to be completely corroded - one of my Spartans of similar age had its shield transformed into a greyish, extremely brittle substance. A complete loss and way too thin for being rescued.
Well- let's see, I'll show it in good macros.
I'm also expecting the worst from the liners and the (possible?) file/metal saw as they have been a real headache on middle-aged Vics for me. That's why I started to be fascinated by the brass-lined, old ones.
The scales will be something to experiment with, maybe I'll find a way of giving them some stability. I've done so on older, non-victorinox knives, just for the sake of rescueing the old look.
Turned out far from perfect, but at least something to keep the hands busy with.
And finally, if everything else fails- I (and you) will have gained some pictures, a nice thread about a doomed knife and maybe even some tools to be salvaged and re-used! Frankenstein yo-ho!Tomcat
-
@Tomcat_81 said:
Thank you, jazzbass! That explains a lot - I've seen a couple of knives with this defect and always wondered
if it was due to some desinfectant, oil or something alike.When I first saw this poor fisherman I thought about buying it, just to try out how it will clean up.
What do you think, folks?
Should I get it and post pictures of the restoring process?Tomcat
Show us photos of the rust on inoxidable tools, it is interesting!
Sent from my iPad using Tapatalk
-
Good luck! The scales will probably have to be replaced completely. One of the ones I had cleaned up really well, but within a month or so everything was corroded again - esp the inlay and the bail. Looks like the front scale on this is cracking through, which means it will start disintegrating. Whatever is coming off the scales tends to eat away at the outside liners too, so they may need to be replaced.
Thank you for your thoughts!
I'm expecting the inlay to be completely corroded - one of my Spartans of similar age had its shield transformed into a greyish, extremely brittle substance. A complete loss and way too thin for being rescued.
Well- let's see, I'll show it in good macros.
I'm also expecting the worst from the liners and the (possible?) file/metal saw as they have been a real headache on middle-aged Vics for me. That's why I started to be fascinated by the brass-lined, old ones.
The scales will be something to experiment with, maybe I'll find a way of giving them some stability. I've done so on older, non-victorinox knives, just for the sake of rescueing the old look.
Turned out far from perfect, but at least something to keep the hands busy with.
And finally, if everything else fails- I (and you) will have gained some pictures, a nice thread about a doomed knife and maybe even some tools to be salvaged and re-used! Frankenstein yo-ho!Tomcat

-
Sounds like the restoration of the Fisherman deserves its own thread!
It would be a shame if it got lost here in this big pile of ebay rip-offs.
Good luck with it. -
...thats about 25 x the original price. That means, in 7 years they are worth around 125`000 $, in 2030 around 2.5 Millions!
Not a bad investment.
Could there are some "fakes"/copies around? You just have to take a LE 2016 and replace the scales. No engravings on the 2010, only the 2010 on the plate.
-
@JNOXID said:
Show us photos of the rust on inoxidable tools, it is interesting!Sure. Here is the same knife - a blue Fischermesser - that I picked up years ago. The front scale has totally disintegrated and fallen off, but it looked much like the one in the auction in question. Note the rust on the top of the main and pen blades, the file (being plated steel and not stainless at the time is the most susceptible), and the top of the caplifter. While this does look like your standard dirty eBay knife, I have cleaned off portions of the rust and can tell you that it has pitted the surface of the tools.

-
@JNOXID said:
Show us photos of the rust on inoxidable tools, it is interesting!
Sure. Here is the same knife - a blue Fischermesser - that I picked up years ago. The front scale has totally disintegrated and fallen off, but it looked much like the one in the auction in question. Note the rust on the top of the main and pen blades, the file (being plated steel and not stainless at the time is the most susceptible), and the top of the caplifter. While this does look like your standard dirty eBay knife, I have cleaned off portions of the rust and can tell you that it has pitted the surface of the tools.

Thank you, jazzbass! I've forgotten make my own photos of rust. I had the same problems with this knife and after the regular cleaning of rust on the tools covered the surface with varnish to prevent the release of gas. Let's see what comes out of this, at least stop rust knives that lie in the box next to this toxic knife. Here is next knife in the box:

Sent from my iPad using Tapatalk
-
"Come closer, gentlemen, get your tickets and proceed through the gates into the lair of Ahab, the zombie-fisherman!"
</topic/70795
Have fun!
Tomcat -
@ulli said:
http://www.ebay.com/itm/VICTORINOX-2010-DAMASCUS-LIMITED-SWISS-ARMY-KNIFE-VERY-RARE-/282360353681?hash=item41bdfd1391:g:wfkAAOSwCU1Yoo5X...thats about 25 x the original price. That means, in 7 years they are worth around 125`000 $, in 2030 around 2.5 Millions!
Not a bad investment.
Could there are some "fakes"/copies around? You just have to take a LE 2016 and replace the scales. No engravings on the 2010, only the 2010 on the plate.
And its now over $5K... seems like someones playing a joke :o :D
-
Buck Crosslock, $30. Gut hook was either broke or cut off the end ofthe saw blade. Street price new for this knife is $40, so $30 is just absurd for a broken, modern production knife.
-
LM Surge
Bids start from $120
Buy it now, for $200 -
Unfortunately, there's always people with more money than sense

-
...thats about 25 x the original price. That means, in 7 years they are worth around 125`000 $, in 2030 around 2.5 Millions!
Not a bad investment.
Could there are some "fakes"/copies around? You just have to take a LE 2016 and replace the scales. No engravings on the 2010, only the 2010 on the plate.
And its now over $5K... seems like someones playing a joke :o :D
Sold for $5100 :o
-
$65 for a plain old used Spartan? Are they nuts?
-
CRAZY LOW?
TOO good to be true?I dunno , but that is a CRAZY price , and I am stayin far away....... as I just went through a "Too good to be true" DEAL
on a pioneer. 
-
"its in very good shape"...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login