Crazy
-
This is the one I want. A mere $70,000 for the platinum version on the right.

-
Not crazy, but dunno where to put it..
Swiss Major officers uniform, including Vicoria Elsener dolch 43:
-
Still no bids? :think:
-
De Luxe?¿? Is there a difference between that and deluxe?
-
What's up with this one: http://www.ebay.com/itm/140934555254
Used Wenger Champ for: $233????

Wasn't the Pointer/Setter knife basically the same model with a new name for the US? I just bought one of ebay for $30 or so yesterday.
-
@ICanFixThat said:
What's up with this one: http://www.ebay.com/itm/140934555254Used Wenger Champ for: $233????

Wasn't the Pointer/Setter knife basically the same model with a new name for the US? I just bought one of ebay for $30 or so yesterday.

-
TWO of these sold for $550 each :pok:
-
:ahhh
-
@ICanFixThat said:
What's up with this one: http://www.ebay.com/itm/140934555254Used Wenger Champ for: $233????

Wasn't the Pointer/Setter knife basically the same model with a new name for the US? I just bought one of ebay for $30 or so yesterday.
That winning bidder is paying huge prices for knives lately, I've been outbid by them a few times.
-
Wow, over $100. I should go dig a couple of old cards out of my PC junk box and make some money.
I don't think these scales are even very well done. I mean, drilling through the middle of that chip?? That's just ugly.
-
What's up with this one: http://www.ebay.com/itm/140934555254
Used Wenger Champ for: $233????

Wasn't the Pointer/Setter knife basically the same model with a new name for the US? I just bought one of ebay for $30 or so yesterday.
That winning bidder is paying huge prices for knives lately, I've been outbid by them a few times.
I bought a used one of those a few months back for less than $30. I wanted it just to get the universal wrench. $233 really IS CRAZY.
-
@PTRSAK said:
http://www.ebay.com/itm/380601243063Wow, over $100. I should go dig a couple of old cards out of my PC junk box and make some money.
I don't think these scales are even very well done. I mean, drilling through the middle of that chip?? That's just ugly.
What the... I mean why? I get the gimmick factor but how is that comfortable? And no, those are not well done. I would think youd want to put the electronics in resin, so that they were visible, but the hand was treated with a smooth outer plastic shell.
Peter I nominate you to make one of these up for a test auction and see how it goes...

-
Yeah, he(?) outbid me on a Wenger nomad that I wanted just for the wrench.
I do have a 1/2 pint kit of "Water Clear casting resin" which would make a nice covering for those scales.
If I do some they will be encased in that. Also a good idea from the health aspect. Older boards still used lead solder' -
@ICanFixThat said:
What's up with this one: http://www.ebay.com/itm/140934555254Used Wenger Champ for: $233????

Wasn't the Pointer/Setter knife basically the same model with a new name for the US? I just bought one of ebay for $30 or so yesterday.
@Syph007 said:
I bought a used one of those a few months back for less than $30. I wanted it just to get the universal wrench. $233 really IS CRAZY.Agree that those price is insane.
The "Pointer" has the additional lock on the main blade.
The Champ from the auction is on older model (more "turns" on corkscrew, no markings on the back of the main blade, no line guide on fish scaler etc...), but it is not Worth, in my opinion, more than $ 40-50, as there are plenty of them around. -
@PTRSAK said:
Yeah, he(?) outbid me on a Wenger nomad that I wanted just for the wrench.I do have a 1/2 pint kit of "Water Clear casting resin" which would make a nice covering for those scales.
If I do some they will be encased in that. Also a good idea from the health aspect. Older boards still used lead solder'There are a couple of mods here done with PCB. One much like you said. I'll try to find it.
-
Yeah, he(?) outbid me on a Wenger nomad that I wanted just for the wrench.
I do have a 1/2 pint kit of "Water Clear casting resin" which would make a nice covering for those scales.
If I do some they will be encased in that. Also a good idea from the health aspect. Older boards still used lead solder'There are a couple of mods here done with PCB. One much like you said. I'll try to find it.
Here's one by Landoza, the sheath maker.
</post/391098>
-
Yeah, he(?) outbid me on a Wenger nomad that I wanted just for the wrench.
I do have a 1/2 pint kit of "Water Clear casting resin" which would make a nice covering for those scales.
If I do some they will be encased in that. Also a good idea from the health aspect. Older boards still used lead solder'There are a couple of mods here done with PCB. One much like you said. I'll try to find it.
Here's one by Landoza, the sheath maker.
</post/391098>
Ah, a new one to me, I hadnt seen that before. Looks much nicer with the resin than a naked PCB. I have 10 new spartans that could use some dressing up to sell, that might not be a bad idea.
-
Yeah, he(?) outbid me on a Wenger nomad that I wanted just for the wrench.
I do have a 1/2 pint kit of "Water Clear casting resin" which would make a nice covering for those scales.
If I do some they will be encased in that. Also a good idea from the health aspect. Older boards still used lead solder'There are a couple of mods here done with PCB. One much like you said. I'll try to find it.
Here's one by Landoza, the sheath maker.
</post/391098>
Ah, a new one to me, I hadnt seen that before. Looks much nicer with the resin than a naked PCB. I have 10 new spartans that could use some dressing up to sell, that might not be a bad idea.
If you do decide to work with PCB, wear eye protection and a face mask. All the solder flying around and the PCB stinks when you cut or sand it. And it gets in your skin, hard to wash off.
-
[quote author=PTRSAK link=topic=35270.msg709035#msg709035 date=1364208005]
Yeah, he(?) outbid me on a Wenger nomad that I wanted just for the wrench.I do have a 1/2 pint kit of "Water Clear casting resin" which would make a nice covering for those scales.
If I do some they will be encased in that. Also a good idea from the health aspect. Older boards still used lead solder'There are a couple of mods here done with PCB. One much like you said. I'll try to find it.
Here's one by Landoza, the sheath maker.
</post/391098>
Ah, a new one to me, I hadnt seen that before. Looks much nicer with the resin than a naked PCB. I have 10 new spartans that could use some dressing up to sell, that might not be a bad idea.
If you do decide to work with PCB, wear eye protection and a face mask. All the solder flying around and the PCB stinks when you cut or sand it. And it gets in your skin, hard to wash off.
[/quote]Thats why I like to only work with metal. Metal dust pretty much falls straight down, not so much airborn. Plastics and alot of natural materials smell pretty bad too.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
