Crazy
-
@ICanFixThat said:
What's up with this one: http://www.ebay.com/itm/140934555254Used Wenger Champ for: $233????

Wasn't the Pointer/Setter knife basically the same model with a new name for the US? I just bought one of ebay for $30 or so yesterday.
@Syph007 said:
I bought a used one of those a few months back for less than $30. I wanted it just to get the universal wrench. $233 really IS CRAZY.Agree that those price is insane.
The "Pointer" has the additional lock on the main blade.
The Champ from the auction is on older model (more "turns" on corkscrew, no markings on the back of the main blade, no line guide on fish scaler etc...), but it is not Worth, in my opinion, more than $ 40-50, as there are plenty of them around. -
@PTRSAK said:
Yeah, he(?) outbid me on a Wenger nomad that I wanted just for the wrench.I do have a 1/2 pint kit of "Water Clear casting resin" which would make a nice covering for those scales.
If I do some they will be encased in that. Also a good idea from the health aspect. Older boards still used lead solder'There are a couple of mods here done with PCB. One much like you said. I'll try to find it.
-
Yeah, he(?) outbid me on a Wenger nomad that I wanted just for the wrench.
I do have a 1/2 pint kit of "Water Clear casting resin" which would make a nice covering for those scales.
If I do some they will be encased in that. Also a good idea from the health aspect. Older boards still used lead solder'There are a couple of mods here done with PCB. One much like you said. I'll try to find it.
Here's one by Landoza, the sheath maker.
</post/391098>
-
Yeah, he(?) outbid me on a Wenger nomad that I wanted just for the wrench.
I do have a 1/2 pint kit of "Water Clear casting resin" which would make a nice covering for those scales.
If I do some they will be encased in that. Also a good idea from the health aspect. Older boards still used lead solder'There are a couple of mods here done with PCB. One much like you said. I'll try to find it.
Here's one by Landoza, the sheath maker.
</post/391098>
Ah, a new one to me, I hadnt seen that before. Looks much nicer with the resin than a naked PCB. I have 10 new spartans that could use some dressing up to sell, that might not be a bad idea.
-
Yeah, he(?) outbid me on a Wenger nomad that I wanted just for the wrench.
I do have a 1/2 pint kit of "Water Clear casting resin" which would make a nice covering for those scales.
If I do some they will be encased in that. Also a good idea from the health aspect. Older boards still used lead solder'There are a couple of mods here done with PCB. One much like you said. I'll try to find it.
Here's one by Landoza, the sheath maker.
</post/391098>
Ah, a new one to me, I hadnt seen that before. Looks much nicer with the resin than a naked PCB. I have 10 new spartans that could use some dressing up to sell, that might not be a bad idea.
If you do decide to work with PCB, wear eye protection and a face mask. All the solder flying around and the PCB stinks when you cut or sand it. And it gets in your skin, hard to wash off.
-
[quote author=PTRSAK link=topic=35270.msg709035#msg709035 date=1364208005]
Yeah, he(?) outbid me on a Wenger nomad that I wanted just for the wrench.I do have a 1/2 pint kit of "Water Clear casting resin" which would make a nice covering for those scales.
If I do some they will be encased in that. Also a good idea from the health aspect. Older boards still used lead solder'There are a couple of mods here done with PCB. One much like you said. I'll try to find it.
Here's one by Landoza, the sheath maker.
</post/391098>
Ah, a new one to me, I hadnt seen that before. Looks much nicer with the resin than a naked PCB. I have 10 new spartans that could use some dressing up to sell, that might not be a bad idea.
If you do decide to work with PCB, wear eye protection and a face mask. All the solder flying around and the PCB stinks when you cut or sand it. And it gets in your skin, hard to wash off.
[/quote]Thats why I like to only work with metal. Metal dust pretty much falls straight down, not so much airborn. Plastics and alot of natural materials smell pretty bad too.
-
Get the butterfly nets, boys, we've got a live one!
-
@ColoSwiss said:
Get the butterfly nets, boys, we've got a live one!:rofl:
I talked with the seller, I really thought he had made a mistake. But no he really believes it's worth 5K or he would rather keep it. I guess he got some bad drugs, or is in need of some good drugs.
-
Get the butterfly nets, boys, we've got a live one!
:rofl:
I talked with the seller, I really thought he had made a mistake. But no he really believes it's worth 5K or he would rather keep it. I guess he got some bad drugs, or is in need of some good drugs.
He probably paid 4K for it.
-
Found a cheap CT clone on a hungarian auction site. 8$. Do you guys think I should jump into it? It's tempting, even looks like the real one, but no Vic trademarks...
-
@borgwarrior said:
Found a cheap CT clone on a hungarian auction site. 8$. Do you guys think I should jump into it? It's tempting, even looks like the real one, but no Vic trademarks...Hama is a German company, producing world-wide. That company is quite famous (or infamous?) for useful stuff. They are not the cheapest, but you can get many things produced by them.
I cannot imagine, that this is a illegal clone, produced by hama. German laws are very strict here. And a german company illegaly cloning "a".... no "THE" most famous product of switzerland... that would be too much.
Tools look like the original one. Maybe it was produced under licence of Victorinox.... or someone illegally put a Hama-logo on it. :D
However, it looks good enough to try it.
PS. Wait, it's like 5€? I would try it, definitely. Could you order one for me, or is it a unique one? (Shipment to Germany)
-
Will ask the seller.
Btw, I know Hama, and that's why I'm curious. For 1600 HUF/~8$/~6 euros, it's a steal even if it isn't legit :)
-
That definitely looks worth "risking" 5€ on.
If nothing else it would make for a good post in the "Cheap and Cheerful" forum.
-
I bought a CT 34 clone from China. A real piece of crap. It looks just like a CT 34.
-
The grind on the can opener, the shape of the scissor spring, the single rather than doubled-back spring on the pliers, the chromed rather than blued bits, the Rostfrei tang stamp -- all show that this CT sold by Hama is not made by Victorinox. Surely China. The plastic bag around the knife in its box is also typical of the chinese copies I have seen. Cheap and deservedly so.
-
From Germany, but meriting inclusion. Adding the Victorinox sheath is a nice touch.
-
"Sehr Hochwertig" (Very High quality) ! but Keine Warrantie - no warranty. Has the typical chinese humped scissors. Yeah the Vic pouch is nice. Must be the reason for the 80 Euros price (no bids).
-
@borgwarrior said:
Will ask the seller.Btw, I know Hama, and that's why I'm curious. For 1600 HUF/~8$/~6 euros, it's a steal even if it isn't legit :)
I asked Victorinox about this specific auction. (If it's a legit or licenced replica) They told me it's definitively a knockoff. They will now try to start legal actions.
-
maybe it's so expensive because it's "clean" :think:
-
And it's been up there for weeks with no price drops.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login