What do I do
-
Did you try blowing out the sand with some WD40? Than wash it again in some soapy water and and oil it.
-
Ugh... I seem to remember a thread like this a looooong time ago. If I remember right, the solution was similar to what enki_ck posted above. Wash it in warm soapy water, then use a hair dryer or compressed air to blow it dry. Keep repeating until the grinding stops then oil it.
-
A toothbrush and dawn dish liquid work wonders.
-
Amici,
Either that or if you're that attached to it, take it to the local watchmaker and ask him to clean it for you. I have a friend that does this with some incredible cleaning machine that his trade allows him to use.Cheers,
Serge -
Whenever I've cleaned my SI, I use the trigger nozzle on the garden hose to really blast out any junk, opening and closing it a few times, then spray with WD-40 to clear out any water, then towel dry and apply whatever oil I've got (usually some CLP).
Only time I've gotten any grit in a SAK, it was some metal filings from sharpening my sidelock Adventurer that dribbled down the blade (I was using a carbide oilstone) and into the hinge. That took a lot of shoving the WD-40 nozzle into the joint to spray it out as best as possible, but some grit wouldn't dislodge right away. I kept it as well oiled as I could, it eventually worked itself out.
Matt in Texas
-
Open and close the blades and tools while under the running water of the tap. You need the constant water flow to really flush it out.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
so it was full of sand and salt water and I have cleaned her out and oiled but the tools still grined