Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

Dime Damage

Scheduled Pinned Locked Moved Gerber Tools
60 Posts 1 Posters 18.8k Views
  1. Home
  2. Tool Talk
  3. Gerber Tools
  4. Dime Damage
Dime Damage
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • theonew Offline
    theonew
    Posts: 1,294
    theonew Offline
    theonew
    wrote on last edited by
    #9 Quote Reply

      Well I don't believe that the little spring is taking all of the force but it is definitely being stressed.
      This setup appears to be very similar to what LM uses for their mini-pliers. But there is a noticeable difference in geometry as the photo below shows. Top - LM Squirt PS4, middle - LM Style PS, bottom - Gerber Dime.

      The little springs on the LMs are noticeably shorter than on the Dime, which I would imagine creates less opportunity to bend :think: The tips of the little springs on the LMs are also beveled a bit which may be to counteract certain stresses :think:

      1 Reply Last reply
      • J-sews Offline
        J-sews
        Admin Team
        Posts: 23,224
        J-sews Offline
        J-sews
        Admin Team
        wrote on last edited by
        #10 Quote Reply

          Okay, I see what you mean now. :salute: I don't have a Dime yet, but looking at a Squirt or a Juice I can see how it works. And to be honest, I believe the backspring IS taking on the entire force of the plier. :o That is a great deal of pressure for such a small bit of metal.

          All the more reason they should make doubly certain to get the heat treatment on them done right.

          1 Reply Last reply
          • scrappy Offline
            scrappy
            Posts: 2,633
            scrappy Offline
            scrappy
            wrote on last edited by
            #11 Quote Reply

              The dime is a great value and I can't knock it. but I think the leatherman quality on a tool this size is going to be better.

              1 Reply Last reply
              • Chako Offline
                Chako
                Posts: 22,725
                Chako Offline
                Chako
                wrote on last edited by
                #12 Quote Reply

                  I am going to have to look at mine closely whenever it gets here. :think:

                  1 Reply Last reply
                  • Mr. Whippy Offline
                    Mr. Whippy
                    Posts: 12,208
                    Mr. Whippy Offline
                    Mr. Whippy
                    wrote on last edited by
                    #13 Quote Reply

                      Man, I HATE reading this. :(

                      I got my Gerber Dime yesterday and I have been really impressed with it. In many ways, I think it's better than the Squirt. The bottle opener and pliers jaws are much better. I've only cut some copper wire, but haven't seen a problem.

                      And I love the knife blade shape. I think it's great that it's not a chisel grind (like the squirt).

                      Looking at the springs, it looks like the pliers only act on ONE spring. The other "leaf" is part of the pliers "recoil" mechanism. Put another way, the base of the pliers only rest on the one spring.

                      I really like this little tool...I hope this is a "one off" problem. :(

                      1 Reply Last reply
                      • AHB Offline
                        AHB
                        Admin Team
                        Posts: 16,954
                        AHB Offline
                        AHB
                        Admin Team
                        wrote on last edited by
                        #14 Quote Reply

                          @Chako said:
                          I am going to have to look at mine closely whenever it gets here. :think:

                          I'll stare at mine too when it arrives... :tu: :D

                          1 Reply Last reply
                          • Mr. Whippy Offline
                            Mr. Whippy
                            Posts: 12,208
                            Mr. Whippy Offline
                            Mr. Whippy
                            wrote on last edited by
                            #15 Quote Reply

                              Ok. :(

                              I tried to cut ONE strand of #12 solid core copper wire:

                              It's going back to Gerber. I like the tool, but the wire cutters ARE NOT TO BE USED!!!

                              :'( ...and I really like this tool too.

                              1 Reply Last reply
                              • J-sews Offline
                                J-sews
                                Admin Team
                                Posts: 23,224
                                J-sews Offline
                                J-sews
                                Admin Team
                                wrote on last edited by
                                #16 Quote Reply

                                  Ouch! That's a real bummer guys. :-\ Hopefully Gerber can get this issue sorted pronto

                                  1 Reply Last reply
                                  • theonew Offline
                                    theonew
                                    Posts: 1,294
                                    theonew Offline
                                    theonew
                                    wrote on last edited by
                                    #17 Quote Reply

                                      That sucks, I was really hoping mine was just a fluke :'(

                                      I'm starting to think that leatherman bevels the ends of the springs to help stabilize the longitudinal forces.

                                      1 Reply Last reply
                                      • badwolf Offline
                                        badwolf
                                        Posts: 1,780
                                        badwolf Offline
                                        badwolf
                                        wrote on last edited by
                                        #18 Quote Reply

                                          Really not what you want to see from a new product, what a shame, maybe just a batch :think:

                                          1 Reply Last reply
                                          • AimlessWanderer Offline
                                            AimlessWanderer
                                            Posts: 17,518
                                            AimlessWanderer Offline
                                            AimlessWanderer
                                            wrote on last edited by
                                            #19 Quote Reply

                                              I suspect that if all the forces are acting on that one small spring, we're talking a design issue not a materials one. The concept of the tool is excellent, and I hope Gerber's designers are working on this as we speak otherwise they are going to be facing an ocean of problems down the line.

                                              For me they either need to increase the supported length of the spring, tie the two springs together somehow to double the strength, or drastically increase the cross sectional area. This could potentially be the best keychain pliers out there if they can resolve this.

                                              My main issue is the bewildered fools that act as Gerber agents in the UK. I'm sure Gerber will get this sorted one way or another (it's not THAT difficult to fix), but how that translates to UK support/recall/exchange is a real concern for me. I hope they communicate clear instruction through and don't just re-send out these weak versions once they've fixed it

                                              1 Reply Last reply
                                              • Syph007 Offline
                                                Syph007
                                                Global Moderators
                                                Posts: 9,842
                                                Syph007 Offline
                                                Syph007
                                                Global Moderators
                                                wrote on last edited by
                                                #20 Quote Reply

                                                  To me it looks like mostly a material issue, but the design could be better to so as to not put all force on that one spring.

                                                  If that spring was brought to full hardness, then brought back down to about 45 (43-37 works too) then it would behave like a spring and would it would be impossible for it to bend like that. I challenge anyone to put a bend in a SAK backspring, can't be done.

                                                  So there is zero doubt in my mind the heat treat was bad. We don't know yet if its the whole line though or a batch. Gerber will have to fill in those details.

                                                  1 Reply Last reply
                                                  • AimlessWanderer Offline
                                                    AimlessWanderer
                                                    Posts: 17,518
                                                    AimlessWanderer Offline
                                                    AimlessWanderer
                                                    wrote on last edited by
                                                    #21 Quote Reply

                                                      @Syph007 said:
                                                      To me it looks like mostly a material issue, but the design could be better to so as to not put all force on that one spring.

                                                      If that spring was brought to full hardness, then brought back down to about 45 (43-37 works too) then it would behave like a spring and would it would be impossible for it to bend like that. I challenge anyone to put a bend in a SAK backspring, can't be done.

                                                      So there is zero doubt in my mind the heat treat was bad. We don't know yet if its the whole line though or a batch. Gerber will have to fill in those details.

                                                      Are you saying you think it should have snapped if overstressed rather than deformed? :think:

                                                      1 Reply Last reply
                                                      • Syph007 Offline
                                                        Syph007
                                                        Global Moderators
                                                        Posts: 9,842
                                                        Syph007 Offline
                                                        Syph007
                                                        Global Moderators
                                                        wrote on last edited by
                                                        #22 Quote Reply

                                                          @50ft-trad said:

                                                          @Syph007 said:

                                                          To me it looks like mostly a material issue, but the design could be better to so as to not put all force on that one spring.

                                                          If that spring was brought to full hardness, then brought back down to about 45 (43-37 works too) then it would behave like a spring and would it would be impossible for it to bend like that. I challenge anyone to put a bend in a SAK backspring, can't be done.

                                                          So there is zero doubt in my mind the heat treat was bad. We don't know yet if its the whole line though or a batch. Gerber will have to fill in those details.

                                                          Are you saying you think it should have snapped if overstressed rather than deformed? :think:

                                                          Absolutely!!!!

                                                          1 Reply Last reply
                                                          • Mr. Whippy Offline
                                                            Mr. Whippy
                                                            Posts: 12,208
                                                            Mr. Whippy Offline
                                                            Mr. Whippy
                                                            wrote on last edited by
                                                            #23 Quote Reply

                                                              @Syph007 said:

                                                              @50ft-trad said:

                                                              @Syph007 said:

                                                              To me it looks like mostly a material issue, but the design could be better to so as to not put all force on that one spring.

                                                              If that spring was brought to full hardness, then brought back down to about 45 (43-37 works too) then it would behave like a spring and would it would be impossible for it to bend like that. I challenge anyone to put a bend in a SAK backspring, can't be done.

                                                              So there is zero doubt in my mind the heat treat was bad. We don't know yet if its the whole line though or a batch. Gerber will have to fill in those details.

                                                              Are you saying you think it should have snapped if overstressed rather than deformed? :think:

                                                              Absolutely!!!!

                                                              Let me echo theonew's comment:

                                                              I wasn't applying THAT much force to it. The copper wire hardly has a dent in it.

                                                              Just to reiterate: DO NOT USE the wire cutters! :ahhh

                                                              1 Reply Last reply
                                                              • AimlessWanderer Offline
                                                                AimlessWanderer
                                                                Posts: 17,518
                                                                AimlessWanderer Offline
                                                                AimlessWanderer
                                                                wrote on last edited by
                                                                #24 Quote Reply

                                                                  @Syph007 said:

                                                                  @50ft-trad said:

                                                                  @Syph007 said:

                                                                  To me it looks like mostly a material issue, but the design could be better to so as to not put all force on that one spring.

                                                                  If that spring was brought to full hardness, then brought back down to about 45 (43-37 works too) then it would behave like a spring and would it would be impossible for it to bend like that. I challenge anyone to put a bend in a SAK backspring, can't be done.

                                                                  So there is zero doubt in my mind the heat treat was bad. We don't know yet if its the whole line though or a batch. Gerber will have to fill in those details.

                                                                  Are you saying you think it should have snapped if overstressed rather than deformed? :think:

                                                                  Absolutely!!!!

                                                                  I don't know enough about knife specs to argue the point, but my mind is fixed on the fact that not all springs snap if overstressed. Not new ones anyway, where fatigue hasn't had chance to introduce a little stress cracking.

                                                                  We'll find out soon enough though. If they come out with some that don't fail under the same load it's materials ... if the tool gets pulled or modified, it's design :)

                                                                  @Mr. Whippy said:
                                                                  Let me echo theonew's comment:

                                                                  I wasn't applying THAT much force to it. The copper wire hardly has a dent in it.

                                                                  Just to reiterate: DO NOT USE the wire cutters! :ahhh

                                                                  There's still something fundamentally wrong with the tool though for that to happen. I hope lot's of people DO use the wire cutters ... I want Gerber to fix whatever the problem is, and they'll only do that if there's enough tool failures :-\

                                                                  1 Reply Last reply
                                                                  • Syph007 Offline
                                                                    Syph007
                                                                    Global Moderators
                                                                    Posts: 9,842
                                                                    Syph007 Offline
                                                                    Syph007
                                                                    Global Moderators
                                                                    wrote on last edited by
                                                                    #25 Quote Reply

                                                                      @50ft-trad said:

                                                                      @Syph007 said:

                                                                      @50ft-trad said:

                                                                      @Syph007 said:

                                                                      To me it looks like mostly a material issue, but the design could be better to so as to not put all force on that one spring.

                                                                      If that spring was brought to full hardness, then brought back down to about 45 (43-37 works too) then it would behave like a spring and would it would be impossible for it to bend like that. I challenge anyone to put a bend in a SAK backspring, can't be done.

                                                                      So there is zero doubt in my mind the heat treat was bad. We don't know yet if its the whole line though or a batch. Gerber will have to fill in those details.

                                                                      Are you saying you think it should have snapped if overstressed rather than deformed? :think:

                                                                      Absolutely!!!!

                                                                      I don't know enough about knife specs to argue the point, but my mind is fixed on the fact that not all springs snap if overstressed. Not new ones anyway, where fatigue hasn't had chance to introduce a little stress cracking.

                                                                      We'll find out soon enough though. If they come out with some that don't fail under the same load it's materials ... if the tool gets pulled or modified, it's design :)

                                                                      Just to clarify, a normal spring in a folder or MT isnt distorted to that extent under normal tool operation. How much does a sak spring flex, maybe a couple mm's? It flexes, then does its job and pushes back, then returns to normal.

                                                                      What I'm saying is if a spring is distorted to the extent of what is pictured with the dime it would for sure snap, no chance that a spring is going to be able to bend like that and 'spring' back to normal, it's just not possible.

                                                                      1 Reply Last reply
                                                                      • AimlessWanderer Offline
                                                                        AimlessWanderer
                                                                        Posts: 17,518
                                                                        AimlessWanderer Offline
                                                                        AimlessWanderer
                                                                        wrote on last edited by
                                                                        #26 Quote Reply

                                                                          @Syph007 said:

                                                                          @50ft-trad said:

                                                                          @Syph007 said:

                                                                          @50ft-trad said:

                                                                          [quote author=Syph007 link=topic=36210.msg584986#msg584986 date=1332437057]
                                                                          To me it looks like mostly a material issue, but the design could be better to so as to not put all force on that one spring.

                                                                          If that spring was brought to full hardness, then brought back down to about 45 (43-37 works too) then it would behave like a spring and would it would be impossible for it to bend like that. I challenge anyone to put a bend in a SAK backspring, can't be done.

                                                                          So there is zero doubt in my mind the heat treat was bad. We don't know yet if its the whole line though or a batch. Gerber will have to fill in those details.

                                                                          Are you saying you think it should have snapped if overstressed rather than deformed? :think:

                                                                          Absolutely!!!!

                                                                          I don't know enough about knife specs to argue the point, but my mind is fixed on the fact that not all springs snap if overstressed. Not new ones anyway, where fatigue hasn't had chance to introduce a little stress cracking.

                                                                          We'll find out soon enough though. If they come out with some that don't fail under the same load it's materials ... if the tool gets pulled or modified, it's design :)

                                                                          Just to clarify, a normal spring in a folder or MT isnt distorted to that extent under normal tool operation. How much does a sak spring flex, maybe a couple mm's? It flexes, then does its job and pushes back, then returns to normal.

                                                                          What I'm saying is if a spring is distorted to the extent of what is pictured with the dime it would for sure snap, no chance that a spring is going to be able to bend like that and 'spring' back to normal, it's just not possible.
                                                                          [/quote]

                                                                          Oh, totally agree! It's only done that because the component has failed. It doesn't 100% prove materials or design though. I've not got my Dime's through yet ... still tied up in the mail system somewhere ... but I've just got home and had a look at my LM squirt.

                                                                          The pliers only rest on one spring again, and I can't see that being much thicker than the Dime over the tapered front section due to the amount of room the plier heads take up when closed. There does however seem to be a significantly shorter unsupported length of spring looking at the pics. This only narrows down the culprits to material choice, spring design, or heat treat though. If the spring has bent OUT like that, then where it's supported it must have bent IN right where the cut out is for the saddle piece, forming an S shape :think:

                                                                          Is that why the pliers jammed when it was closed? :think: :think:

                                                                          Whatever it is I hope they've figured it out, or at the very least have started investigating

                                                                          1 Reply Last reply
                                                                          • theonew Offline
                                                                            theonew
                                                                            Posts: 1,294
                                                                            theonew Offline
                                                                            theonew
                                                                            wrote on last edited by
                                                                            #27 Quote Reply

                                                                              Bend or snap both result in failure. My vote is that it is a design flaw. If the compressive forces acting on the spring during wire cutting were kept inline with the spring itself I'm pretty sure I wouldn't have the hand strength to cause this failure and keeping the forces inline would be a lot easier to do if the flexible part of the spring was shorter like the way LM has them :think:

                                                                              1 Reply Last reply
                                                                              • Gareth Offline
                                                                                Gareth
                                                                                Admin Team
                                                                                Posts: 37,725
                                                                                Gareth Offline
                                                                                Gareth
                                                                                Admin Team
                                                                                wrote on last edited by Gareth
                                                                                #28 Quote Reply

                                                                                  Just throwing this question out there; just what are the chances that Gerber designed a pocket tool with wire cutters and then didn't ever test them? :think: Seems at least a little unlikely to me, so with that in mind I'm at least hoping it's a heat treatment failure rather than a fundamental design flaw.

                                                                                  I will for sure be having a very close look at my Dime when it gets here though.

                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  • 3
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. Gerber Tools
                                                                                  4. Dime Damage
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0